[1] [1] Wang Yingnan, Hang Lingxia, Hu Minda. Super smooth surface fabrication processes-plasma etching[J]. Surface Technology, 2008, 37(1): 51-53.

[2] [2] Wang Jiafu, Wang Bo, Zhang Jufan, et al.. Design of the atmospheric pressure plasma polishing system for machining of ultra smooth surface[J]. Aviation Precision Manufacturing Technology, 2008, 44(4): 11-14.

[3] [3] H Takino, N Shibata, H Itoh, et al.. Computer numerically controlled plasma chemical vaporization machining with a pipe electrode for optical fabrication[J]. Appl Opt, 1998, 37(22): 5198-5210.

[4] [4] H Takino, K Yamamura, Y Sano, et al.. Removal characteristics of plasma chemical vaporization machining with a pipe electrode for optical fabrication[J]. Appl Opt, 2010, 49(23): 4434-4440.

[5] [5] K Yamamura, H Mimurab, K Yamauchib, et al.. Aspheric surface fabrication in nm-level accuracy by numerically controlled plasma chemical vaporization machining (CVM) and elastic emission machining (EEM)[C]. SPIE , 2002, 4782: 265-270.

[6] [6] I-M Eichentopf, G Bhm, T Arnold. Etching mechanisms during plasma jet machining of silicon carbide[J]. Surf Coat Technol, 2011, 205: S430-S434.

[7] [7] I-M Eichentopf, G Bhm, Johannes Meister, et al.. Reactive plasma jet high-rate etching of SiC[J]. Plasma Process Polym, 2009, 6: S204-S208.

[8] [8] T Arnold, G Bohm, R Fechner, et al.. Ultra-precision surface finishing by ion beam and plasma jet techniques—status and outlook[J]. Nucl Instrum Methods Phys Res A, 2010, 616(2-3): 147-156.

[9] [9] P Subrahmanyan. Rapid fabrication of precision surfaces—a new paradigm[C]. San Sebastian: Proceedings of the Euspen International Conference, 2009.

[10] [10] P K Subrahmanyan, G Gardopee. Reactive atom plasma (RAPTM) processing of mirrors for astronomy[C]. SPIE, 2008, 7018: 701809.

[11] [11] D M Allen, P Shore, R W Evans, et al.. Ion beam, focused ion beam, and plasma discharge machining[J]. CIRP Annals-Manufacturing Technology, 2009, 58(2): 647-662.

[12] [12] M Castelli, R Jourdain, P Morantz, et al.. Rapid optical surface figuring using reactive atom plasma[J]. Precision Engineering, 2012, 36(3): 467-476.

[13] [13] C Fanara, P Shore, J R Nicholls, et al.. A new reactive atom plasma technology (RAPT) for precision machining: the etching of ULE surfaces[J]. Adv Eng Mater, 2006, 8(10): 933-939.

[14] [14] W O′Brien. Characterisation and Material Removal Properties of the RAPTM Process[D]. Cranfield: Cranfield University, 2011.