[1] Qu Y Y, Li X J. Innovation chain catches up: innovation and development of Chinas IC industry[J]. Business Management Journal, 44, 5-26(2022).

[3] Lin N, Chen Y Y, Wei X et al. Spectral purity systems applied for laser-produced plasma extreme ultraviolet lithography sources: a review[J]. High Power Laser Science and Engineering, 11, e64(2023).

[4] den Boef A J. Optical wafer metrology sensors for process-robust CD and overlay control in semiconductor device manufacturing[J]. Surface Topography: Metrology and Properties, 4, 023001(2016).

[5] Qiu J, Yang G H, Li J et al. Development and challenges of lithographical alignment technologies[J]. Acta Optica Sinica, 43, 1900001(2023).

[6] Li Y M, Yang L, Wang X H et al. Overlay metrology for lithography machine[J]. Laser & Optoelectronics Progress, 59, 0922023(2022).

[7] Liu H C, Osborne J R, Dahlen G A et al. Recent CD AFM probe developments for sub-45 nm technology nodes[J]. Proceedings of SPIE, 6922, 69222J(2008).

[8] Wang N, Liu L T, Song X J et al. Subsurface defect detection method of optical elements based on through-focus scanning optical microscopy[J]. Acta Optica Sinica, 43, 2112001(2023).

[9] Saravanan C S, Liu Y D, Dasari P et al. Evaluating diffraction based overlay metrology for double patterning technologies[J]. Proceedings of SPIE, 6922, 69220C(2008).

[10] Saravanan C S, Tan A, Dasari P et al. Diffraction based overlay metrology for α-carbon applications[J]. Proceedings of SPIE, 6922, 69222W(2008).

[11] Attota R, Germer T A, Silver R M. Through-focus scanning-optical-microscope imaging method for nanoscale dimensional analysis[J]. Optics Letters, 33, 1990-1992(2008).

[12] Attota R, Silver R, Barnes B M. Optical through-focus technique that differentiates small changes in line width, line height, and sidewall angle for CD, overlay, and defect metrology applications[J]. Proceedings of SPIE, 6922, 69220F(2008).

[13] Attota R, Seiler D G, Diebold A C et al. TSOM method for nanoelectronics dimensional metrology[C], 1395, 57-63(2011).

[14] Attota R, Dixson R G, Vladár A E. Through-focus scanning optical microscopy[J]. Proceedings of SPIE, 8036, 803610(2011).

[15] Du J Y, Dai F Z, Bu Y et al. Alignment technique using moire fringes based on self-coherence in lithographic tools[J]. Chinese Journal of Lasers, 44, 1204006(2017).

[16] Troccolo P M, Smith N P, Zantow T. Tool and mark design factors that influence optical overlay measurement errors[J]. Proceedings of SPIE, 1673, 148-156(1992).

[17] Nam Y S, Kim S, Shin J H et al. Overlay improvement methods with diffraction based overlay and integrated metrology[J]. Proceedings of SPIE, 9426, 942612(2015).

[18] Rigolli P L, Rozzoni L, Turco C et al. AIM technology for non-volatile memories microelectronics devices[J]. Proceedings of SPIE, 6152, 61524C(2006).

[19] Ausschnitt C P, Chu W, Kolor D et al. Blossom overlay metrology implementation[J]. Proceedings of SPIE, 6518, 65180G(2007).

[20] Attota R K. Through-focus or volumetric type of optical imaging methods: a review[J]. Journal of Biomedical Optics, 23, 070901(2018).

[21] Lee J H, Park J H, Jeong D et al. Tip/tilt-compensated through-focus scanning optical microscopy[J]. Proceedings of SPIE, 10023, 100230P(2016).

[22] Girshick R, Donahue J, Darrell T et al. Rich feature hierarchies for accurate object detection and semantic segmentation[C], 580-587(2014).

[23] Wang F, Wang H, Wang H C et al. Learning from simulation: an end-to-end deep-learning approach for computational ghost imaging[J]. Optics Express, 27, 25560-25572(2019).

[24] Ning X, Tian W J, Yu Z Y et al. HCFNN: high-order coverage function neural network for image classification[J]. Pattern Recognition, 131, 108873(2022).