[1] Klemberg-Sapieha J E, Oberste-Berghaus J, Martinu L et al. . Mechanical characteristics of optical coatings prepared by various techniques: A comparative study[J]. Applied Optics, 43, 2670-2679(2004). http://www.ncbi.nlm.nih.gov/pubmed/15130006

[2] Martin P J, Macleod H A, Netterfield R P et al. Ion-beam-assisted deposition of thin films[J]. Applied Optics, 22, 178-184(1983). http://www.opticsinfobase.org/ao/fulltext.cfm?uri=ao-22-1-178&id=26389

[3] Mikhelashvili V, Eisenstein G. Effects of annealing conditions on optical and electrical characteristics of titanium dioxide films deposited by electron beam evaporation[J]. Journal of Applied Physics, 89, 3256-3269(2001). http://scitation.aip.org/content/aip/journal/jap/89/6/10.1063/1.1349860

[4] McNeil J R, Barron A C, Wilson S R et al. . Ion-assisted deposition of optical thin films: Low energy vs high energy bombardment[J]. Applied Optics, 23, 552-559(1984). http://europepmc.org/abstract/MED/18204599

[5] Kim K H, Park K C, Ma D Y. Structural, electrical and optical properties of aluminum doped zinc oxide films prepared by radio frequency magnetron sputtering[J]. Journal of Applied Physics, 81, 7764-7772(1997). http://scitation.aip.org/content/aip/journal/jap/81/12/10.1063/1.365556

[6] Hallbauer A, Huber D, Strauss G et al. Overview about the optical properties and mechanical stress of different dielectric thin films produced by reactive-low-voltage-ion-plating[J]. Thin Solid Films, 516, 4587-4592(2008). http://www.sciencedirect.com/science/article/pii/S0040609007008917

[7] Masse J, Szymanowski H, Zabeida O et al. Stability and effect of annealing on the optical properties of plasma-deposited Ta2O5 and Nb2O5 films[J]. Thin Solid Films, 515, 1674-1682(2006).

[8] Tabata A, Matsuno N, Suzuoki Y et al. Optical properties and structure of SiO2 films prepared by ion-beam sputtering[J]. Thin Solid Films, 289, 84-89(1996). http://www.sciencedirect.com/science/article/pii/S0040609096088992

[9] Chao S, Wang W H, Hsu M Y et al. Characteristics of ion-beam-sputtered high-refractive-index TiO2-SiO2 mixed films[J]. Journal of the Optical Society of America A, 16, 1477-1483(1999). http://www.opticsinfobase.org/abstract.cfm?uri=josaa-16-6-1477

[10] Lee C C, Tien C L, Hsu J C. Internal stress and optical properties of Nb2O5 thin films deposited by ion-beam sputtering[J]. Applied Optics, 41, 2043-2047(2002).

[11] Hsu J C, Lee C C. Single- and dual-ion-beam sputter deposition of titanium oxide films[J]. Applied Optics, 37, 1171-1176(1998). http://www.opticsinfobase.org/abstract.cfm?uri=ao-37-7-1171

[12] Çetinorgu E, Baloukas B, Zabeida O et al. Mechanical and thermoelastic characteristics of optical thin films deposited by dual ion beam sputtering[J]. Applied Optics, 48, 4536-4544(2009). http://www.opticsinfobase.org/abstract.cfm?URI=ao-48-23-4536

[13] Liu Huasong, Wang Lishuan, Yang Xiao et al. Energy band properties of hafnium oxide thin films fabricated by ion beam sputtering technique[J]. Acta Optica Sinica, 37, 0231001(2017).

[14] Li Ding, Xiong Shengming. Mid-infrared properties of oxide coatings prepared by ion beam sputtering deposition[J]. Chinese J Lasers, 42, 0107002(2015).

[15] Yoon S G, Kang S M, Jung W S et al. Effect of assist ion beam voltage on intrinsic stress and optical properties of Ta2O5 thin films deposited by dual ion beam sputtering[J]. Thin Solid Films, 516, 3582-3585(2008). http://www.sciencedirect.com/science/article/pii/S0040609007014368

[16] Prins S L, Barron A C, Herrmann W C et al. Effect of stress on performance of dense wavelength division multiplexing filters: Optical properties[J]. Applied Optics, 43, 626-632(2004). http://www.opticsinfobase.org/abstract.cfm?uri=ao-43-3-633

[17] Harry G M, Abernathy M R. Becerra-Toledo A E, et al. Titania-doped tantala/silica coatings for gravitational-wave detection[J]. Classical and Quantum Gravity, 24, 405-415(2007).

[18] Pinard L, Michel C, Sassolas B et al. Mirrors used in the LIGO interferometers for first detection of gravitational waves[J]. Applied Optics, 56, C11-C15(2017). http://europepmc.org/abstract/MED/28158044

[19] Arndt J, Hummel W. The general refractivity formula applied to densified silicate glasses[J]. Physics and Chemistry of Minerals, 15, 363-369(1988). http://link.springer.com/article/10.1007/BF00311041

[20] Jerman M, Qiao Z H, Mergel D. Refractive index of thin films of SiO2, ZrO2, and HfO2 as a function of the films’ mass density[J]. Applied Optics, 44, 3006-3012(2005).

[21] Freund L B, Suresh S[M]. Thin film materials: Stress, defect formation and surface evolution(2009).

[22] Davis C A. A simple model for the formation of compressive stress in thin films by ion bombardment[J]. Thin Solid Films, 226, 30-34(1993). http://www.sciencedirect.com/science/article/pii/004060909390201Y

[23] Carter G. Peening in ion-assisted thin-film deposition: A generalized model[J]. Journal of Physics D, 27, 1046-1055(1994). http://www.ingentaconnect.com/content/iop/jphysd/1994/00000027/00000005/art00024

[24] Hay J. Measuring substrate-independent modulus of dielectric films by instrumented indentation[J]. Journal of Materials Research, 24, 667-677(2009). http://adsabs.harvard.edu/abs/2009jmatr..24..667h

[25] Oliver W C, Pharr G M. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology[J]. Journal of Materials Research, 19, 3-20(2004). http://ps.oxfordjournals.org/external-ref?access_num=10.1557/jmr.2004.19.1.3&link_type=DOI