[1] Yang Y Q, Chen J, Song C H et al. Current status and progress on technology of selective laser melting of metal parts[J]. Laser & Optoelectronics Progress, 55, 011401(2018).

[2] Zhu Z Y, Chen C J, Zhang M. Research progress and prospect of laser additive manufacturing technique for magnesium alloy[J]. Laser & Optoelectronics Progress, 56, 190006(2019).

[3] Xu J L, Zhou J Z, Tan W S et al. Thermal corrosion resistance of Co-based alloy coatings by laser cladding assisted by electromagnetic stirring[J]. Acta Optica Sinica, 39, 0114002(2019).

[4] Ji L F, Ma R, Zhang X M et al. Application of laser lift-off technique in flexible electronics manufacturing[J]. Chinese Journal of Lasers, 47, 0100001(2020).

[5] Du W Z, Huang T, Cao Z et al. Galvanometer scanning laser-micro-welding of AISI304 stainless-steel foil[J]. Chinese Journal of Lasers, 46, 1102006(2019).

[6] Wu X, Zhang P L, Tang M et al. Formation and microstructure characteristics in spot welding of dissimilar Cu-Al foil by nanosecond laser scanning[J]. Chinese Journal of Lasers, 46, 0402006(2019).

[7] [7] KasulkeP, SchmidtW, TiterleL, et al.Solder ball bumper SB2: a flexible manufacturing tool for 3-dimensional sensor and microsystem packages[C]∥22nd IEEE/CPMT International Electronics Manufacturing Technology Symposium. IEMT-Europe 1998. Electronics Manufacturing and Development for Automotives (Cat. No.98CH36204). 27-29 April 1998, Berlin, Germany. New York: IEEE Press, 1998: 70- 75.

[8] Liu W, Wang C Q, Li M Y et al. Effect of laser input energy on wetting areas of solder and formation of intermetallic compounds at Sn-3.5Ag-0.75Cu/Au right-angled joint interface[C]∥Proceedings of 2005 International Conference on A, 197-201(2005).

[9] Ji H J, Ma Y Y, Li M Y et al. Effect of the silver content of SnAgCu solder on the interfacial reaction and on the reliability of angle joints fabricated by laser-jet soldering[J]. Journal of Electronic Materials, 44, 733-743(2015).

[10] Chiu T C, Lin J J, Yang H C et al. Reliability model for bridging failure of Pb-free ball grid array solder joints under compressive load[J]. Microelectronics Reliability, 50, 2037-2050(2010).

[11] Lee Y, Kim K, Suganuma K. The effect of micro via-in pad design on surface-mount assembly defects: voiding and spattering[J]. Soldering & Surface Mount Technology, 25, 4-14(2013).

[12] Peng J, Li F Q, Li L Q et al. Comparative study on laser welding with pre-melting liquid filler and conventional filler wire[J]. Chinese Journal of Lasers, 42, 0103003(2015).

[13] Yue W, Zhou M B, Zhang X P. Reliability and failure analysis of electronic components induced by the reflection of laser beam in the laser jet solder ball bonding process[C]∥18th International Conference on Electronic Packaging , 1658-1662(2017).

[14] Yue W, Zhang X P. Essential factors influencing the wettability of Sn-3.0Ag-0.5Cu solder balls on Au pad of the right-angle solder interconnect in laser jet solder ball bonding[C]∥16th International Conference on Elect, 930-934(2015).

[15] Yue W, Zhou M B, Zhang X P. Effect of the Au bonding pad contamination on the wettability of Au/Sn-3.0Ag-0.5Cu/Au solder joints in flux-free laser jet solder ball bonding process[C]∥ 17th International Conference on Electronic P, 1201-1205(2016).

[16] Mehdizadeh N Z, Raessi M, Chandra S et al. Effect of substrate temperature on splashing of molten tin droplets[J]. Journal of Heat Transfer, 126, 445-452(2004).

[17] Yang L L, Chen R, Qin W L et al. Research on vacuum reflow soldering process defects in power IC chips[J]. Microelectronics, 49, 574-577, 582(2019).

[18] Xu M R, Liu C Y. The change of radius and velocity of the rising bubble in water[J]. College Physics, 27, 14-17(2008).

[19] Wu S S[M]. Transport principles in materials processing and metallurgy, 74-82(2001).