[1] Singh P, Pungotra H, Kalsi N S. On the characteristics of titanium alloys for the aircraft applications[J]. Materials Today: Proceedings, 4, 8971-8982(2017).

[2] Putyrskii S V, Yakovlev A L, Nochovnaya N A. Benefits and applications of high-strength titanium alloys[J]. Russian Engineering Research, 38, 945-948(2018).

[3] Anil Kumar V, Gupta R K, Prasad M J N V et al. Recent advances in processing of titanium alloys and titanium aluminides for space applications: a review[J]. Journal of Materials Research, 36, 689-716(2021).

[4] Pushp P, Dasharath S M, Arati C. Classification and applications of titanium and its alloys[J]. Materials Today: Proceedings, 54, 537-542(2022).

[5] Sarraf M, Rezvani Ghomi E, Alipour S et al. A state-of-the-art review of the fabrication and characteristics of titanium and its alloys for biomedical applications[J]. Bio-Design and Manufacturing, 5, 371-395(2022).

[6] Mohseni E, Zalnezhad E, Bushroa A et al. Ti/TiN/HA coating on Ti-6Al-4V for biomedical applications[J]. Ceramics International, 41, 1-14457(2015).

[7] Sun Z P, He G Y, Meng Q J et al. Corrosion mechanism investigation of TiN/Ti coating and TC4 alloy for aircraft compressor application[J]. Chinese Journal of Aeronautics, 33, 1824-1835(2020).

[8] TANG Weizhong[M]. Preparation principle, technology and application of thin film materials(2003).

[9] FU Wenbo, LIU Jinhua, LIANG Jianhua et al. Impact of substrate materials on morphology and microstructure of Ti films[J]. Rare Metal Materials and Engineering, 45, 623-628(2016).

[10] Li L, Liu Y, Mao X N et al. Structure transformation of Ti films deposited on SiC single crystal substrates[J]. Materials Characterization, 134, 64-68(2017).

[11] Liu Y L, Liu F, Wu Q et al. Effect of bias voltage on microstructure and nanomechanical properties of Ti films[J]. Transactions of Nonferrous Metals Society of China, 24, 2870-2876(2014).

[12] Liu L M, Li W H, Sun H L et al. Effects of Ti target purity and microstructure on deposition rate, microstructure and properties of Ti films[J]. Materials, 15, 2661(2022).

[13] Messier R, Giri A P, Roy R A. Revised structure zone model for thin film physical structure[J]. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 2, 500-503(1984).

[14] Chang R C, Chen F Y, Chuang C T et al. Residual stresses of sputtering titanium thin films at various substrate temperatures[J]. Journal of Nanoscience and Nanotechnology, 10, 4562-4567(2010).

[15] Einollahzadeh-Samadi M, Dariani R S. Effect of substrate temperature and deposition rate on the morphology and optical properties of Ti films[J]. Applied Surface Science, 280, 263-267(2013).

[16] Arshi N, Lu J Q, Koo B H et al. Effect of substrate temperature on micro-structural properties of Ti and TiN films deposited by e-beam evaporation technique[J]. Surface Review and Letters, 19, 1250037(2012).

[17] Zhang H K, Li X, Su J Y et al. Modulation of columnar crystals of magnetron sputtered Ti thin films[J]. Thin Solid Films, 689, 137512(2019).

[18] Chawla V, Jayaganthan R, Chandra R. Structural characterizations of magnetron sputtered nanocrystalline TiN thin films[J]. Materials Characterization, 59, 1015-1020(2008).

[19] Rashidi A M, Hayati M, Rezaei A. Prediction of the relative texture coefficient of nanocrystalline nickel coatings using artificial neural networks[J]. Solid State Sciences, 13, 1589-1593(2011).

[20] McKenzie D R, Yin Y, McFall W D et al. The orientation dependence of elastic strain energy in cubic crystals and its application to the preferred orientation in titanium nitride thin films[J]. Journal of Physics: Condensed Matter, 8, 5883-5890(1996).

[21] Checchetto R. Titanium thin film deposition in a deuterium atmosphere[J]. Thin Solid Films, 302, 77-83(1997).

[22] Bishara H, Ghidelli M, Dehm G et al. Influence of substrates and e-beam evaporation parameters on the microstructure of nanocrystalline and epitaxially grown Ti thin films[J]. Applied Surface Science, 562, 150194(2021).

[23] Baranova L, Strunin V, Baysova B. The dependence of the surface roughness of aluminum nitride films on the processing methods when magnetron sputtering is used[J]. Journal of Physics: Conference Series, 2270, 012005(2022).

[24] Li R D, Deng J X, Kong L et al. Influence of substrate temperature on structure and properties of Nb-doped β-Ga2O3 films[J]. Journal of Electronic Materials, 51, 2390-2395(2022).

[25] Wang L Q, Wang W Y, Huang J H et al. Growth and properties of hydrogenated microcrystalline silicon thin films prepared by magnetron sputtering with different substrate temperatures[J]. Rare Metals, 41, 1037-1042(2022).

[26] Du B Y, Tsui O K C, Zhang Q L et al. Study of elastic modulus and yield strength of polymer thin films using atomic force microscopy[J]. Langmuir, 17, 3286-3291(2001).

[27] Jee A Y, Lee M. Comparative analysis on the nanoindentation of polymers using atomic force microscopy[J]. Polymer Testing, 29, 95-99(2010).

[28] Griepentrog M, Krämer G, Cappella B. Comparison of nanoindentation and AFM methods for the determination of mechanical properties of polymers[J]. Polymer Testing, 32, 455-460(2013).

[29] Bei H, George E P, Hay J L et al. Influence of indenter tip geometry on elastic deformation during nanoindentation[J]. Physical Review Letters, 95, 045501(2005).

[30] LIU Yazhou. Study on strengthening mechanism of particle reinforced titanium matrix composites based on molecular dynamics[D](2020).

[31] WANG Huiying. Study on the mechanical properties of through silicon via copper[D](2019).