[1] Zhu J H, He F, Zhang W H. Key optimization design issues for achieving additively manufactured aircraft and aerospace structures[J]. Aeronautical Manufacturing Technology, 60, 16-21(2017).

[2] Johnston R, Kazancı Z. Analysis of additively manufactured (3D printed) dual-material auxetic structures under compression[J]. Additive Manufacturing, 38, 101783(2021).

[3] Liao W H, Dai N. Development and challenge of lightweight design and manufacturing technology for aerospace structures[J]. Journal of Nanjing University of Aeronautics & Astronautics, 55, 347-360(2023).

[4] Liu L, Liu Y, Liu S T. Topology optimization based method for simultaneous optimal design of stiffener’s layout and heights of curved thin-wall stiffened structures[J/OL]. Chinese Journal of Computational Mechanics, 1-7. http:∥kns.cnki.net/kcms/detail/21.1373.o3.20240718.1720.012.html

[5] Niu X X, Li X Y, Li P Z. Topology optimization design of aircraft flap based on variable density method[J]. Journal of Ordnance Equipment Engineering, 45, 101-106(2024).

[6] Xu S J, Quan C Y, Yang K et al. Application and prospect of metal additive manufacturing technology in aviation field[J]. Powder Metallurgy Industry, 32, 9-17(2022).

[7] Han P L. Additive design and manufacturing of jet engine parts[J]. Engineering, 3, 648-652(2017).

[8] Zhang K F, Chen Q, Yan R et al. Self-supporting topological-optimization algorithm considering powder-recoating process in laser powder-bed fusion[J]. Chinese Journal of Lasers, 51, 2002310(2024).

[9] Wang W, Yuan L, Wang X W. Macro-structural lightweight analysis for aircraft parts made by additive manufacturing technology[J]. Aircraft Design, 35, 24-28(2015).

[10] Zhang W H, Zhou H, Li S Y et al. Material-structure integrated design for high-performance aerospace thin-walled component[J]. Acta Aeronautica et Astronautica Sinica, 44, 627428(2023).

[11] Zhang X W. Application of metal additive manufacturing in aero-engine[J]. Journal of Aerospace Power, 31, 10-16(2016).

[12] Liu Z Z, Chen W Q, Liu J et al. Design method of lidar optical path structure based on topology optimization[J]. Chinese Journal of Lasers, 50, 1910002(2023).

[13] Huo Z K, Wang B, Zhou Y et al. Topology optimization of double-skin stiffened sandwich structure for additive manufacturing[J]. Chinese Journal of Computational Mechanics, 40, 861-871(2023).

[14] Liu S T, Li Q H, Chen W J et al. Combination of topology optimization and additive manufacturing: an integration method of structural design and manufacturing[J]. Aeronautical Manufacturing Technology, 60, 26-31(2017).

[15] Wang C, Zhang W H, Zhou L et al. Topology optimization of self-supporting structures for additive manufacturing with B-spline parameterization[J]. Computer Methods in Applied Mechanics and Engineering, 374, 113599(2021).

[16] Wei W, Wu H X, Wu X X et al. Review of self‑supporting design for additive manufacturing[J]. Chinese Journal of Lasers, 51, 1002307(2024).

[17] Zuo K T, Chen L P, Zhang Y Q et al. Study of key algorithms in topology optimization[J]. The International Journal of Advanced Manufacturing Technology, 32, 787-796(2007).

[18] Yago D, Juan C T, Lloberas-Valls O et al. Topology optimization methods for 3D structural problems: a comparative study[J]. Archives of Computational Methods in Engineering, 29, 1525-1567(2022).

[19] Xia L, Xia Q, Huang X D et al. Bi-directional evolutionary structural optimization on advanced structures and materials: a comprehensive review[J]. Archives of Computational Methods in Engineering, 25, 437-478(2018).

[20] Jiang L, Wu C W. Topology optimization of energy storage flywheel[J]. Structural and Multidisciplinary Optimization, 55, 1917-1925(2017).

[21] Wang D, Wei X M, Liu J et al. Lightweight design of an AlSi10Mg aviation control stick additively manufactured by laser powder bed fusion[J]. Rapid Prototyping Journal, 28, 1869-1881(2022).

[22] Xie L Y, Zhang Y, Ge M H et al. Topology optimization of heat sink based on variable density method[J]. Energy Reports, 8, 718-726(2022).

[23] Chen M T, Zuo W K, Chen Y Y et al. Parametric topology optimization design and analysis of additively manufactured joints in spatial grid structures[J]. Engineering Structures, 300, 117123(2024).

[24] Liu H L, Yang D X, Hao P et al. Isogeometric analysis based topology optimization design with global stress constraint[J]. Computer Methods in Applied Mechanics and Engineering, 342, 625-652(2018).

[25] Han N M, Zhang X M, Liu S D et al. Effects of pre-stretching and ageing on the strength and fracture toughness of aluminum alloy 7050[J]. Materials Science and Engineering: A, 528, 3714-3721(2011).

[26] Dan C Y, Cui Y C, Wu Y et al. Achieving ultrahigh fatigue resistance in AlSi10Mg alloy by additive manufacturing[J]. Nature Materials, 22, 1182-1188(2023).

[27] Galy C, Le Guen E, Lacoste E et al. Main defects observed in aluminum alloy parts produced by SLM: from causes to consequences[J]. Additive Manufacturing, 22, 165-175(2018).

[28] Qi T, Zhu H H, Zeng X Y et al. Effect of Si content on the cracking behavior of selective laser melted Al7050[J]. Rapid Prototyping Journal, 25, 1592-1600(2019).

[29] Shi G H, Guan C Q, Quan D L et al. An aerospace bracket designed by thermo-elastic topology optimization and manufactured by additive manufacturing[J]. Chinese Journal of Aeronautics, 33, 1252-1259(2020).

[30] Liu D C, Hao P, Zhang K P et al. On the integrated design of curvilinearly grid-stiffened panel with non-uniform distribution and variable stiffener profile[J]. Materials & Design, 190, 108556(2020).

[31] Han C J, Zou Y J, Dong Z et al. Manipulating martensite transformation to achieve superior strength-ductility synergy in laser powder bed fusion of nickel-aluminium-bronze alloy via heat treatments[J]. Virtual and Physical Prototyping, 20, e2478227(2025).

[32] Zhu L, Li N, Childs P R N. Light-weighting in aerospace component and system design[J]. Propulsion and Power Research, 7, 103-119(2018).