[1] Lin X, Huang W D. High performance metal additive manufacturing technology applied in aviation field[J]. Materials China, 34, 684-688, 658(2015).

[2] Tang H B, Wu Y, Zhang S Q et al. Research status and development trendof high performance large metallic components by laser additive manufacturing technique[J]. Journal of Netshape Forming Engineering, 11, 58-63(2019).

[3] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[4] Su J L, Jiang F L, Teng J et al. Recent innovations in laser additive manufacturing of titanium alloys[J]. International Journal of Extreme Manufacturing, 6, 032001(2024).

[5] Yang Y Q, Wu S B, Zhang Y et al. Application progress and prospect of fiber laser in metal additive manufacturing[J]. Chinese Journal of Lasers, 47, 0500012(2020).

[6] Guo C H, Yan J Y, Wang Z C et al. Research progress on metal laser fuse additive manufacturing process[J]. Hot Working Technology, 49, 5-10(2020).

[7] Gao H R, Li J K, Zhang Z W et al. Research status and prospect of multi-field modulated metal laser additive manufacturing (invited)[J]. Chinese Journal of Lasers, 51, 1002306(2024).

[8] Song B, Zhang J L, Zhang Y J et al. Research progress of materials design for metal laser additive manufacturing[J]. Acta Metallurgica Sinica, 59, 1-15(2023).

[9] Moeinfar K, Khodabakhshi F, Kashani-Bozorg S F et al. A review on metallurgical aspects of laser additive manufacturing (LAM): stainless steels, nickel superalloys, and titanium alloys[J]. Journal of Materials Research and Technology, 16, 1029-1068(2022).

[10] Zhou Q J, Yan Z Y, Zhang J J et al. Research and application progress of laser directed energy deposition on large-scale metal components in aerospace (invited)[J]. Chinese Journal of Lasers, 51, 1002303(2024).

[11] Feng Q G, Wang L X, Wang L et al. Research on high-quality additive manufacturing process of titanium alloy fuse with composite heat source[J]. Chinese Journal of Lasers, 50, 0802306(2023).

[12] Sacco E, Moon S K. Additive manufacturing for space: status and promises[J]. The International Journal of Advanced Manufacturing Technology, 105, 4123-4146(2019).

[13] Ishfaq K, Asad M, Mahmood M A et al. Opportunities and challenges in additive manufacturing used in space sector: a comprehensive review[J]. Rapid Prototyping Journal, 28, 2027-2042(2022).

[14] Fang L J, Sun B B, Zhang Q et al. Structural design and analysis of selective laser melting forming parts[J]. Laser & Optoelectronics Progress, 60, 0514010(2023).

[15] Li G M, Zhu G X, Li J Q et al. Experimental study on thin walls by laser additive manufacturing based inside-beam powder feeding with variable posture[J]. Laser & Optoelectronics Progress, 60, 0114008(2023).

[16] Ding X P, Li H M, Zhu J Q et al. Application of infrared thermography for laser metal-wire additive manufacturing in vacuum[J]. Infrared Physics & Technology, 81, 166-169(2017).

[17] Yuan D, Shao S Q, Guo C H et al. Grain refining of Ti-6Al-4V alloy fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration[J]. Ultrasonics Sonochemistry, 73, 105472(2021).

[18] Åkerfeldt P, Antti M L, Pederson R. Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V[J]. Materials Science and Engineering: A, 674, 428-437(2016).

[19] Ding D H, Pan Z X, Cuiuri D et al. Wire-feed additive manufacturing of metal components: technologies, developments and future interests[J]. The International Journal of Advanced Manufacturing Technology, 81, 465-481(2015).

[20] Heralic A[M]. Monitoring and control of robotized laser metal-wire deposition(2012).

[21] Kuznetsov A, Jeromen A, Govekar E. Droplet detachment regimes in annular laser beam droplet generation from a metal wire[J]. CIRP Annals, 63, 225-228(2014).

[22] Fu J, Gong L, Zhang Y F et al. Microstructure and mechanical properties of Ti-6Al-4V fabricated by vertical wire feeding with axisymmetric multi-laser source[J]. Applied Sciences, 7, 227(2017).

[23] Mok S H, Bi G J, Folkes J et al. Deposition of Ti-6Al-4V using a high power diode laser and wire, part I: investigation on the process characteristics[J]. Surface and Coatings Technology, 202, 3933-3939(2008).

[24] Mok S H, Bi G J, Folkes J et al. Deposition of Ti-6Al-4V using a high power diode laser and wire, part II: investigation on the mechanical properties[J]. Surface and Coatings Technology, 202, 4613-4619(2008).

[25] Moures F, Cicală E, Sallamand P et al. Optimisation of refractory coatings realised with cored wire addition using a high-power diode laser[J]. Surface and Coatings Technology, 200, 2283-2292(2005).

[26] Kim J D, Peng Y. Plunging method for Nd∶YAG laser cladding with wire feeding[J]. Optics and Lasers in Engineering, 33, 299-309(2000).

[27] Syed W U H, Pinkerton A J, Li L. A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping[J]. Applied Surface Science, 247, 268-276(2005).

[28] Yang G, Ma J J, Carlson B E et al. Decreasing the surface roughness of aluminum alloy welds fabricated by a dual beam laser[J]. Materials & Design, 127, 287-296(2017).

[29] Sun J, Sekou S. Investigation on the process characteristics of laser cladding fabrication using 45 carbon steel wire[J]. Advanced Materials Research, 499, 147-151(2012).

[30] Shen F M, Tao W, Li L Q et al. Effect of microstructure on the corrosion resistance of coatings by extreme high speed laser cladding[J]. Applied Surface Science, 517, 146085(2020).

[31] Mortello M, Casalino G. Transfer mode effects on Ti6Al4V wall building in wire laser additive manufacturing[J]. Manufacturing Letters, 28, 17-20(2021).

[32] Wang H, Zhou W M, Min G Q et al. Research progress of wire feed laser additive manufacturing[J]. China Metal Bulletin, 248-251(2018).

[33] Chen Y, Jiang M, Chen X et al. Research progress of coaxial laser wire additive manufacturing[J]. Materials Science and Technology, 30, 16-27(2022).

[34] Zhang J P, Shi S H, Jiang W W et al. Simulation analysis of temperature field and process optimization of laser cladding based on internal wire feeding of three beams[J]. Chinese Journal of Lasers, 46, 1002004(2019).

[35] Ding X P, Ma H L, Zhang Q et al. Effect of annealing heat treatment on microstructure and corrosion behavior of Ti6Al4V alloy fabricated by multi-laser beam wire-feed additive manufacturing in vacuum environment[J]. Journal of Alloys and Compounds, 914, 165363(2022).

[36] Motta M, Demir A G, Previtali B. High-speed imaging and process characterization of coaxial laser metal wire deposition[J]. Additive Manufacturing, 22, 497-507(2018).

[37] Ji S S, Liu F, Shi T et al. Effects of defocus distance on three-beam laser internal coaxial wire cladding[J]. Chinese Journal of Mechanical Engineering, 34, 45(2021).

[38] Zhan J M, Liang Z G, Huang J Y et al. Study on the single laser cladding process on TC4 titanium alloy surface[J]. Applied Laser, 40, 955-961(2020).

[39] Roch C, Tournier C, Lavernhe S. Process based modelling of power density for wire laser additive manufacturing using a coaxial head[J]. Additive Manufacturing, 73, 103648(2023).

[40] Kelbassa J, Gasser A, Bremer J et al. Equipment and process windows for laser metal deposition with coaxial wire feeding[J]. Journal of Laser Applications, 31, 022320(2019).

[41] Churruca M M, Arrizabalaga J L, Garmendia Saez I et al. Comparative study of laser metal deposition (LMD) of coaxial wire and powder in the manufacture of Ti-6AL-4V structures[J]. Dyna, 95, 376-379(2020).

[42] Silze F, Schnick M, Sizova I et al. Laser metal deposition of Ti-6Al-4V with a direct diode laser set-up and coaxial material feed[J]. Procedia Manufacturing, 47, 1154-1158(2020).

[43] Fu C X, Lei X W, Jia X F et al. Research and application progress of titanium alloy laser additive manufacturing technology[J]. Welded Pipe and Tube, 46, 11-18, 24(2023).

[44] Du F R, Zhu J Q, Ding X P et al. Dimensional characteristics of Ti-6Al-4V thin-walled parts prepared by wire-based multi-laser additive manufacturing in vacuum[J]. Rapid Prototyping Journal, 25, 849-856(2019).

[45] Liu S Y, Shin Y C. Additive manufacturing of Ti6Al4V alloy: a review[J]. Materials & Design, 164, 107552(2019).

[46] Baufeld B, Brandl E, van der Biest O. Wire based additive layer manufacturing: comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition[J]. Journal of Materials Processing Technology, 211, 1146-1158(2011).

[47] Sun W Z, Shan F H, Zong N F et al. Simulation of solidified β grain for Ti-6Al-4V during wire laser additive manufacturing by three-dimensional cellular automaton method[J]. Modelling and Simulation in Materials Science and Engineering, 29, 065006(2021).

[48] Liu S, Brice C, Zhang X L. Interrelated process-geometry-microstructure relationships for wire-feed laser additive manufacturing[J]. Materials Today Communications, 31, 103794(2022).

[49] Yin J, Peng G Y, Chen C P et al. Thermal behavior and grain growth orientation during selective laser melting of Ti-6Al-4V alloy[J]. Journal of Materials Processing Technology, 260, 57-65(2018).

[50] Wilson-Heid A E, Wang Z Q, McCornac B et al. Quantitative relationship between anisotropic strain to failure and grain morphology in additively manufactured Ti-6Al-4V[J]. Materials Science and Engineering: A, 706, 287-294(2017).

[51] Mantri S A, Banerjee R. Microstructure and micro-texture evolution of additively manufactured β-Ti alloys[J]. Additive Manufacturing, 23, 86-98(2018).

[52] Liu Z, Welsch G. Literature survey on diffusivities of oxygen, aluminum, and vanadium in alpha titanium, beta titanium, and in rutile[J]. Metallurgical Transactions A, 19, 1121-1125(1988).

[53] Ahmed T, Rack H J. Phase transformations during cooling in α+β titanium alloys[J]. Materials Science and Engineering: A, 243, 206-211(1998).

[54] Zhang D Y, Wu X Z, Wang Y J et al. Forming process, microstructure, strength and toughness of Ti6Al4V alloy by laser wire-feed additive manufacturing[J]. Iron Steel Vanadium Titanium, 45, 49-56(2024).

[55] Simonelli M, Tse Y Y, Tuck C. On the texture formation of selective laser melted Ti-6Al-4V[J]. Metallurgical and Materials Transactions A, 45, 2863-2872(2014).

[56] Guo J L, Liu Y, Zhao Y et al. Tailoring microstructure and mechanical anisotropy of laser-MIG hybrid additive manufacturing TC11 titanium alloy through solution aging treatment[J]. Journal of Materials Science, 59, 9625-9642(2024).

[57] Guo N, Wu D, Yu M Q et al. Microstructure and properties of Ti-6Al-4V titanium alloy prepared by underwater wire feeding laser deposition[J]. Journal of Manufacturing Processes, 73, 269-278(2022).

[58] Srinivas M, Babu B S. A critical review on recent research methodologies in additive manufacturing[J]. Materials Today: Proceedings, 4, 9049-9059(2017).

[59] Chen Y, Chen X, Jiang M et al. Coaxial laser metal wire deposition of Ti6Al4V alloy: process, microstructure and mechanical properties[J]. Journal of Materials Research and Technology, 20, 2578-2590(2022).

[60] Xie Y, Gao M, Wang F D et al. Anisotropy of fatigue crack growth in wire arc additive manufactured Ti-6Al-4V[J]. Materials Science and Engineering: A, 709, 265-269(2018).

[61] Pixner F, Warchomicka F, Peter P et al. Wire-based additive manufacturing of Ti-6Al-4V using electron beam technique[J]. Materials, 13, 3310(2020).

[62] Graf B, Marko A, Petrat T et al. 3D laser metal deposition: process steps for additive manufacturing[J]. Welding in the World, 62, 877-883(2018).

[63] Ren Z H, Liu Z, Zhou S H et al. Temperature field and stress field simulation of titanium alloy laser fuse additive manufacturing[J]. Journal of Northeastern University (Natural Science), 41, 551-556(2020).

[64] Ye H, Ye K, Guo B G et al. Effects of combining ultrasonic micro-forging treatment with laser metal wire deposition on microstructural and mechanical properties in Ti-6Al-4V alloy[J]. Materials Characterization, 162, 110187(2020).

[65] Yang Y C, Jin X, Liu C M et al. Residual stress, mechanical properties, and grain morphology of Ti-6Al-4V alloy produced by ultrasonic impact treatment assisted wire and arc additive manufacturing[J]. Metals, 8, 934(2018).

[66] Donoghue J, Antonysamy A A, Martina F et al. The effectiveness of combining rolling deformation with wire-arc additive manufacture on β-grain refinement and texture modification in Ti-6Al-4V[J]. Materials Characterization, 114, 103-114(2016).

[67] Sabban R, Bahl S, Chatterjee K et al. Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness[J]. Acta Materialia, 162, 239-254(2019).

[68] Jiang X J, Chen G Y, Men X L et al. Ultrafine duplex microstructure and excellent mechanical properties of TC4 alloy via a novel thermo-mechanical treatment[J]. Journal of Alloys and Compounds, 767, 617-621(2018).

[69] Zhang Y, Hu S S, Zheng C et al. Effects of double annealing on microstructure and properties of TC18 titanium alloy by laser additive manufacturing[J]. Special Casting & Nonferrous Alloys, 41, 1006-1009(2021).

[70] Gao L L, Liu J X, Li Y et al. Effects of electric pulse heat treatment on mechanical properties and adiabatic shear banding of hot-rolled equiaxed TC4 alloy[J]. Rare Metal Materials and Engineering, 45, 2150-2154(2016).

[71] Zhao Z Y, Wang G F, Zhang Y L et al. Fast recrystallization and phase transformation in ECAP deformed Ti-6Al-4V alloy induced by pulsed electric current[J]. Journal of Alloys and Compounds, 786, 733-741(2019).