[1] Li J Y, Li H N, Liao Z R et al. Analytical modelling of full single-track profile in wire-fed laser cladding[J]. Journal of Materials Processing Technology, 290, 116978(2021).

[2] Martin A A, Calta N P, Khairallah S A et al. Dynamics of pore formation during laser powder bed fusion additive manufacturing[J]. Nature Communications, 10, 1987(2019).

[3] Ghanadi N, Pasebani S. A review on wire-laser directed energy deposition: parameter control, process stability, and future research paths[J]. Journal of Manufacturing and Materials Processing, 8, 84(2024).

[4] Shi L, Li X, Jiang L et al. Numerical study of keyhole-induced porosity suppression mechanism in laser welding with beam oscillation[J]. Science and Technology of Welding and Joining, 26, 349-355(2021).

[5] Zhao J Y, Wang J Y, Kang X F et al. Effect of beam oscillation and oscillating frequency induced heat accumulation on microstructure and mechanical property in laser welding of Invar alloy[J]. Optics & Laser Technology, 158, 108831(2023).

[6] Chen B, Meng Z, Ma C Y et al. Welding properties and molten pool flow behavior of TC4 titanium alloy by oscillating galvanometer laser[J]. Acta Aeronautica et Astronautica Sinica, 43, 431-443(2022).

[7] Xia P Y, Wang C M, Mi G Y et al. Numerical simulation of molten pool flow behavior and keyhole evolution behavior in dual-laser beam oscillating bilateral synchronous welding of T-joints[J]. International Journal of Heat and Mass Transfer, 209, 124114(2023).

[8] Song S J, Qiu C H, Xu W et al. Real time monitoring of cooling rate in laser metal-wire forming process under infrared thermography[J]. Infrared and Laser Engineering, 51, 20220074(2022).

[9] Liu H T, Wang X. Experimental study on TC4 laser wire-based additive manufacturing process in vacuum environment[J]. Journal of Netshape Forming Engineering, 15, 100-106(2023).

[10] Zhang D Y, Liu X M, Zhang J et al. Microstructure and mechanical properties of TC4-DT produced by laser wire-feed additive manufacturing[J]. Iron Steel Vanadium Titanium, 42, 97-101(2021).

[11] Wang X, Zhang L J, Ning J et al. Hierarchical grain refinement during the laser additive manufacturing of Ti-6Al-4V alloys by the addition of micron-sized refractory particles[J]. Additive Manufacturing, 45, 102045(2021).

[12] Liu S, Brice C, Zhang X L. Interrelated process-geometry-microstructure relationships for wire-feed laser additive manufacturing[J]. Materials Today Communications, 31, 103794(2022).

[13] Li J Z, Sun Q J, Liu Y B et al. Melt flow and microstructural characteristics in beam oscillation superimposed laser welding of 304 stainless steel[J]. Journal of Manufacturing Processes, 50, 629-637(2020).

[14] Zhang M. Research on laser additive manufacturing characeristics of titanium alloy with powder and wire[D], 46-47(2013).

[15] Xu K X, Lei Z, Huang R S et al. Effects of oscillation parameters on weld formation and porosity of titanium alloy narrow-gap laser wire filling welding[J]. Chinese Journal of Lasers, 48, 0602111(2021).

[16] Long Z W, Gao Y F, Zhang H et al. Effect of process parameters on the behavior of the laser cladding weld pool for side-axis wire feeding[J]. Laser & Optoelectronics Progress, 61, 1514009(2024).

[17] Yang H O, Wang J, Wang C et al. Macrostructure evolution of TC4 titanium alloy fabricated by wire and arc additive manufacturing[J]. Materials Review, 32, 2028-2031, 2046(2018).

[18] Li K B, Li D, Liu D Y et al. Microstructure of single track fiber laser cladding with wire feeding by side[J]. Transactions of the China Welding Institution, 35, 85-88, 117(2014).

[19] Guo Y M, Peng Y, Jiang J L. Study on laser additive manufacturing technology with 4043 aluminum alloy melting wire[J]. Hot Working Technology, 48, 245-247, 255(2019).

[20] Huang Z L, Wang G, Wei S P et al. Quality characterization and technological design in laser hot wire cladding[J]. Transactions of Materials and Heat Treatment, 37, 141-145(2016).

[21] Wang M L, Li Z M, Sun X F et al. Optimization of key technology of Inconel 718 alloy by laser additive repair[J]. Transactions of the China Welding Institution, 45, 30-38(2024).

[22] Hu K X, Li F Y, Zhou Y et al. Thermal-fluid coupling numerical simulation study of temperature field and molten pool morphology of laser direct energy deposition[J]. Laser & Optoelectronics Progress, 61, 2114003(2024).

[23] Geiger M, Leitz K H, Koch H et al. A 3D transient model of keyhole and melt pool dynamics in laser beam welding applied to the joining of zinc coated sheets[J]. Production Engineering, 3, 127-136(2009).

[24] Sohail M, Han S W, Na S J et al. Characteristics of weld pool behavior in laser welding with various power inputs[J]. Welding in the World, 58, 269-277(2014).

[25] Wang T, Zhu Y Y, Zhang S Q et al. Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing[J]. Journal of Alloys and Compounds, 632, 505-513(2015).

[26] Hao Y B, Zhao K, Huang Y L et al. Microstructures and mechanical properties of doubled annealed laser melting deposited TC11 titanium alloy[J]. Chinese Journal of Lasers, 48, 2202001(2021).

[27] Xu J Q, Peng Y, Zhou Q et al. Study on plasma wire and arc additive manufacturing process of titanium alloys with twin-wire feeding[J]. Transactions of the China Welding Institution, 40, 163-164(2019).

[28] Xie Y, Cao H H, Zhang J J et al. The effect of macro and microstructure characterization on tensile properties of laser melting deposited TC11 titanium alloy[J]. Aeronautical Science & Technology, 33, 77-83(2022).

[29] Dou E H, Xiao M L, Ke L D et al. Effect of heat treatment on microstructure and mechanical properties of selective-laser-melted TC11 titanium alloys[J]. Chinese Journal of Lasers, 48, 0602117(2021).