[1] [1] Prakash V, Kumar P, Singh P, Hussain M, Das A, Chattopadhyaya S. Micro-electrical discharge machining of difficult-to-machine materials: a review. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 2019, 233 (2): 339–370

[2] [2] Zeng Z, Wang Y, Wang Z, Shan D, He X. A study of micro-EDM and micro-ECM combined milling for 3D metallic micro-structures. Precision Engineering, 2012, 36(3): 500–509

[3] [3] Schaaf P. Laser Processing of Materials: Fundamentals, Applications and Developments. New York: Springer, 2010

[4] [4] Zhang H, Di J, Zhou M, Yan Y. A comparison in laser precision drilling of stainless steel 304 with nanosecond and picosecond laser pulses. Chinese Journal of Mechanical Engineering, 2014, 27(5): 972–977

[5] [5] Kling R, Dijoux M, Romoli L, Tantussi F, Sanabria J, Mottay E. Metal microdrilling combining high power femtosecond laser and trepanning head. In: Proceedings of Laser-based Micro- and Nanopackaging and Assembly VII. San Francisco: SPIE, 2013, 86080F

[6] [6] Jiang S, Hu Y, Wu H, Zhang Y, Zhang Y, Wang Y, Zhang Y, Zhu W, Li J, Wu D, Chu J. Multifunctional janus microplates arrays actuated by magnetic fields for water/light switches and bio-inspired assimilatory coloration. Advanced Materials, 2019, 31(15): e1807507

[7] [7] Zhu S, Bian Y, Wu T, Chen C, Jiao Y, Jiang Z, Huang Z, Li E, Li J, Chu J, Hu Y, Wu D, Jiang L. High performance bubble manipulation on ferrofluid-infused laser-ablated microstructured surfaces. Nano Letters, 2020, 20(7): 5513–5521

[8] [8] Braun A, Korn G, Liu X, Du D, Squier J, Mourou G. Selfchanneling of high-peak-power femtosecond laser pulses in air. Optics Letters, 1995, 20(1): 73–75

[9] [9] asparian J, Sauerbrey R, Chin S. The critical laser intensity of selfguided light filaments in air. Applied Physics. B, Lasers and Optics, 2000, 71(6): 877–879

[10] [10] Xu Z J, Liu W, Zhang N, Wang M W, Zhu X N. Effect of intensity clamping on laser ablation by intense femtosecond laser pulses. Optics Express, 2008, 16(6): 3604–3609

[11] [11] Schwarz J, Diels J C. UV filaments and their application for laserinduced lightning and high-aspect-ratio hole drilling. Applied Physics. A, Materials Science & Processing, 2003, 77(2): 185–191

[12] [12] Kiselev D, Woeste L, Wolf J P. Filament-induced laser machining (FILM). Applied Physics. B, Lasers and Optics, 2010, 100(3): 515– 520

[13] [13] Wang Z, Jiang L, Li X, Wang A, Yao Z, Zhang K, Lu Y. Highthroughput microchannel fabrication in fused silica by temporally shaped femtosecond laser Bessel-beam-assisted chemical etching. Optics Letters, 2018, 43(1): 98–101

[14] [14] He F, Yu J, Tan Y, Chu W, Zhou C, Cheng Y, Sugioka K. Tailoring femtosecond 1.5-μm Bessel beams for manufacturing high-aspectratio through-silicon vias. Scientific Reports, 2017, 7(1): 40785

[15] [15] Pan D, Xu B, Liu S, Li J, Hu Y, Wu D, Chu J. Amplitude-phase optimized long depth of focus femtosecond axilens beam for singleexposure fabrication of high-aspect-ratio microstructures. Optics Letters, 2020, 45(9): 2584–2587

[16] [16] Leigh S, Sezer K, Li L, Grafton-Reed C, Cuttell M. Recast and oxide formation in laser-drilled acute holes in CMSX-4 nickel singlecrystal superalloy. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 2010, 224 (7): 1005–1016

[17] [17] Zheng C, Zhao K, Shen H, Zhao X, Yao Z. Crack behavior in ultrafast laser drilling of thermal barrier coated nickel superalloy. Journal of Materials Processing Technology, 2020, 282: 116678

[18] [18] Méchain G, Couairon A, Franco M, Prade B, Mysyrowicz A. Organizing multiple femtosecond filaments in air. Physical Review Letters, 2004, 93(3): 035003

[19] [19] Fu Y, Gao H, Chu W, Ni J, Xiong H, Xu H, Yao J, Zeng B, Liu W, Cheng Y, Xu Z, Chin S L. Control of filament branching in air by astigmatically focused femtosecond laser pulses. Applied Physics B, Lasers and Optics, 2011, 103(2): 435–439

[20] [20] Eisenmann S, Pukhov A, Zigler A. Fine structure of a laser-plasma filament in air. Physical Review Letters, 2007, 98(15): 155002

[21] [21] Kamali Y, Sun Q, Daigle J F, Azarm A, Bernhardt J, Chin S L J O C. Lens tilting effect on filamentation and filament-induced fluorescence. Optics Communications, 2009, 282(5): 950–954

[22] [22] Goodwin P C. Evaluating optical aberrations using fluorescent microspheres: methods, analysis, and corrective actions. Methods in Cell Biology, 2013, 114: 369–385

[23] [23] Das D K, Pollock T M. Femtosecond laser machining of cooling holes in thermal barrier coated CMSX4 superalloy. Journal of Materials Processing Technology, 2009, 209(15–16): 5661–5668

[24] [24] Uchtmann H, He C, Gillner A. High precision and high aspect ratio laser drilling: challenges and solutions. In: Proceedings of Conference on High-Power Laser Materials Processing–Lasers, Beam Delivery, Diagnostics, and Applications V. San Francisco: SPIE, 2016

[25] [25] Mincuzzi G, Faucon M, Kling R. Novel approaches in zero taper, fast drilling of thick metallic parts by ultra-short pulse laser. Optics and Lasers in Engineering, 2019, 118: 52–57.