[1] Zhang J, Wang L, Wang D et al. Recent progress in research and development of nickel-based single crystal superalloys[J]. Acta Metallurgica Sinica, 55, 1077-1094(2019).

[2] Zheng K Y, Luo Y E, Zhang Y et al. Progress in laser direct deposition of inconel 718 alloy[J]. Laser & Optoelectronics Progress, 59, 2300001(2022).

[3] Li J K, Zhang Z W, Yang Y Q et al. Crystal orientation and microstructure of DD91 nickel-based single crystal superalloy fabricated by selective laser melting[J]. Chinese Journal of Lasers, 49, 1402103(2022).

[4] Acharya R, Das S. Additive manufacturing of IN100 superalloy through scanning laser epitaxy for turbine engine hot-section component repair: process development, modeling, microstructural characterization, and process control[J]. Metallurgical and Materials Transactions A, 46, 3864-3875(2015).

[5] Acharya R, Bansal R, Gambone J J et al. A coupled thermal, fluid flow, and solidification model for the processing of single-crystal alloy CMSX-4 through scanning laser epitaxy for turbine engine hot-section component repair (part I)[J]. Metallurgical and Materials Transactions B, 45, 2247-2261(2014).

[6] Rottwinkel B, Nölke C, Kaierle S et al. Crack repair of single crystal turbine blades using laser cladding technology[J]. Procedia CIRP, 22, 263-267(2014).

[7] Angel N M, Basak A. On the fabrication of metallic single crystal turbine blades with a commentary on repair via additive manufacturing[J]. Journal of Manufacturing and Materials Processing, 4, 101(2020).

[8] Sayilgan V, Reker D, Bernhard R et al. Single-crystal repair of high-pressure single-crystal turbine blades for industrial conditions[J]. Procedia CIRP, 111, 233-236(2022).

[9] Gäumann M, Henry S, Cléton F et al. Epitaxial laser metal forming: analysis of microstructure formation[J]. Materials Science and Engineering: A, 271, 232-241(1999).

[10] Kurz W, Bezençon C, Gäumann M. Columnar to equiaxed transition in solidification processing[J]. Science and Technology of Advanced Materials, 2, 185-191(2001).

[11] Gäumann M, Bezençon C, Canalis P et al. Single-crystal laser deposition of superalloys: processing-microstructure maps[J]. Acta Materialia, 49, 1051-1062(2001).

[12] Liu Z Y, Qi H. Effects of processing parameters on crystal growth and microstructure formation in laser powder deposition of single-crystal superalloy[J]. Journal of Materials Processing Technology, 216, 19-27(2015).

[13] Acharya R, Bansal R, Gambone J J et al. A microstructure evolution model for the processing of single-crystal alloy CMSX-4 through scanning laser epitaxy for turbine engine hot-section component repair (part II)[J]. Metallurgical and Materials Transactions B, 45, 2279-2290(2014).

[14] Lu N N. Single crystal growth controling of CMSX-10 superalloy via laser melting deposition[D](2021).

[15] Shang X F, Dong J Z, Zhang Y W et al. DED joining process and ultrasonic-assisted performance optimization of high-strength aluminum alloys manufactured by SLM[J]. Acta Optica Sinica, 44, 0422002(2024).

[16] Nie J W, Chen C Y, Liu L T et al. Effect of substrate cooling on the epitaxial growth of Ni-based single-crystal superalloy fabricated by direct energy deposition[J]. Journal of Materials Science & Technology, 62, 148-161(2021).

[17] Rottwinkel B, Nölke C, Kaierle S et al. Laser cladding for crack repair of CMSX-4 single-crystalline turbine parts[J]. Lasers in Manufacturing and Materials Processing, 4, 13-23(2017).

[18] Liu W P, DuPont J N. Effects of substrate crystallographic orientations on crystal growth and microstructure development in laser surface-melted superalloy single crystals. Mathematical modeling of single-crystal growth in a melt pool (Part II)[J]. Acta Materialia, 53, 1545-1558(2005).

[19] Liu Z Y, Qi H. Effects of substrate crystallographic orientations on crystal growth and microstructure formation in laser powder deposition of nickel-based superalloy[J]. Acta Materialia, 87, 248-258(2015).

[20] Wang L, Wang N. Effect of substrate orientation on the formation of equiaxed stray grains in laser surface remelted single crystal superalloys: experimental investigation[J]. Acta Materialia, 104, 250-258(2016).

[21] Wang R, Wang J, Cao T W et al. Microstructure characteristics of a René N5 Ni-based single-crystal superalloy prepared by laser-directed energy deposition[J]. Additive Manufacturing, 61, 103363(2023).

[22] Liang Y J, Cheng X, Li J et al. Microstructural control during laser additive manufacturing of single-crystal nickel-base superalloys: new processing-microstructure maps involving powder feeding[J]. Materials & Design, 130, 197-207(2017).

[23] Cardoso J A S B, Almeida A, Vilar R. Microstructure of a coated single crystalline René N5 part repaired by epitaxial laser deposition[J]. Additive Manufacturing, 49, 102515(2022).

[24] Wang J W, Wang H M, Li K J et al. A new strategy to inhibit stray grain formation during laser directed solidification of single crystal superalloys[J]. Journal of Alloys and Compounds, 906, 163852(2022).

[25] Park J W, Vitek J M, Babu S S et al. Stray grain formation, thermomechanical stress and solidification cracking in single crystal nickel base superalloy welds[J]. Science and Technology of Welding and Joining, 9, 472-482(2004).

[26] Beausir J F B. Analysis tools for electron and X-ray diffraction[EB/OL]. https://www.atex-software.eu

[27] Li B H, Guo S Q, Zhou B et al. Establishment and verification of thermo-mechanical coupled model for laser direct deposition of titanium alloy[J]. Laser & Optoelectronics Progress, 59, 1114007(2022).

[28] Matsushita T, Fecht H J, Wunderlich R K et al. Studies of the thermophysical properties of commercial CMSX-4 alloy[J]. Journal of Chemical & Engineering Data, 54, 2584-2592(2009).

[29] Liu Z Y, Jiang L, Wang Z et al. Mathematical modeling of transport phenomena in multi-track and multi-layer laser powder deposition of single-crystal superalloy[J]. Metallurgical and Materials Transactions A, 49, 6533-6543(2018).

[30] Lee Y S, Nordin M, Babu S S et al. Influence of fluid convection on weld pool formation in laser cladding[J]. Welding Journal, 93, 292-300(2014).

[31] Pang H T, Dong H B, Beanland R et al. Microstructure and solidification sequence of the interdendritic region in a third generation single-crystal nickel-base superalloy[J]. Metallurgical and Materials Transactions A, 40, 1660-1669(2009).

[32] Gebura M, Lapin J. Microsegregation induced inhomogeneity of coarsening of γ′ precipitates in a nickel-based single crystal superalloy[J]. Defect and Diffusion Forum, 300, 826-831(2010).

[33] Cheng K Y, Jo C Y, Kim D H et al. Influence of local chemical segregation on the γ′ directional coarsening behavior in single crystal superalloy CMSX-4[J]. Materials Characterization, 60, 210-218(2009).