[1] Sun Z Y. Numerical study on cooling performance of air-cooled turbine blade with thermal barrier coating[D](2021).

[2] Lu X P, Wang Y, Chen M et al. Effects of film cooling holes on high cycle fatigue strength of DD6 Ni-based single-crystal superalloy[J]. Journal of Propulsion Technology, 45, 203-211(2024).

[3] Li S F, Huang K, Ma H S et al. Research progress on design and manufacture technologies of film cooling hole for aeroengine turbine blade[J]. Journal of Engineering for Thermal Energy and Power, 37, 1-11(2022).

[4] Song J B, Yi H Y. Technology for gas film hole of aircraft engine turbine blade[J]. Tool Engineering, 54, 82-86(2020).

[5] Wen R, Wang Q, Li X et al. Application of ultrafast laser processing technology in aeroengine manufacturing[J]. Electromachining & Mould, 56-59(2020).

[6] Ji L F, Sun W G, Lin Z Y et al. Ultrafast laser technology for fabricating flexible electronics: mechanisms, functions, and challenges (Invited)[J]. Laser & Optoelectronics Progress, 61, 0114005(2024).

[7] Marimuthu S, Smith B. High-throughput picosecond laser machining of aerospace nickel superalloy[J]. Proceedings of the Institution of Mechanical Engineers, 236, 363-372(2022).

[8] Kononenko T V, Freitag C, Sovyk D N et al. Influence of pulse repetition rate on percussion drilling of Ti-based alloy by picosecond laser pulses[J]. Optics and Lasers in Engineering, 103, 65-70(2018).

[9] Sun R F, Zhang X B, Cao W B et al. Laser drilling of Ni-base single-crystal superalloy through thermal barrier coatings[J]. Rare Metal Materials and Engineering, 43, 1193-1198(2014).

[10] Wu B, Chen Y, Zhang Y P. Picosecond laser machining of gas film holes in high pressure turbine guide vanes[J]. Electromachining & Mould, 41-44(2022).

[11] Wang Q. Surface texture and antifriction properties of femtosecond laser machining cemented carbide tools[D](2023).

[12] Feng Q, Picard Y N, Liu H et al. Femtosecond laser micromachining of a single-crystal superalloy[J]. Scripta Materialia, 53, 511-516(2005).

[13] Ma S, McDonald J P, Tryon B et al. Femtosecond laser ablation regimes in a single-crystal superalloy[J]. Metallurgical and Materials Transactions A, 38, 2349-2357(2007).

[14] Zhang N, Wang M S, Ban M X et al. Femtosecond laser drilling 100 μm diameter micro holes with aspect ratios >20 in a nickel based superalloy[J]. Journal of Materials Research and Technology, 28, 1415-1422(2024).

[15] Zhao H L, Zhou R K, Zhao H Y et al. A forming method for improving surface integrity of film cooling holes[J]. Journal of Aerospace Power, 30, 649-655(2015).

[16] Yang W. Experimental study on femtosecond laser micro hole machining of nickel-based superalloy[J]. Electromachining & Mould, 56-60(2021).

[17] Peng J, Zhang J Y, Wu R C et al. Effects of different electron beam welding parameters on the organization and mechanical properties of GH4169 and IC10 nickel-based high temperature alloys[J/OL]. Nonferrous Metals Science and Engineering, 1-8. http:∥kns.cnki.net/kcms/detail/36.1311.TF.20231025.1648.004.html

[18] Chen Q J, Ren N F, Ren Y P et al. Inconel 718 super-alloy femtosecond laser layer-by-layer trepanning drilling technology[J]. Modern Manufacturing Engineering, 73-78(2021).

[19] Wang J, Huang D, Zhu W Y et al. Study on the femtosecond-laser holing process of fully-stabilized tetragonal YSZ thermal barrier coatings[J]. Thermal Spray Technology, 15, 82-90(2023).

[20] Zhang H Y, Zhou M, Wang Y L et al. Development of a quantitative method for the characterization of hole quality during laser trepan drilling of high-temperature alloy[J]. Applied Physics A, 122, 74(2016).

[21] Sun J L, Zhang D W, Jing X B et al. Experimental investigation and optimization on trepanning drilling in K24 superalloy by femtosecond laser via orthogonal experiment[J]. The International Journal of Advanced Manufacturing Technology, 128, 3343-3356(2023).

[22] Zhang F Y, Sun S F, Wang X et al. Optimization of the femtosecond laser trepan drilling strategy on IN792 for improving hole geometrical characteristics and machining efficiency[J]. The International Journal of Advanced Manufacturing Technology, 127, 93-106(2023).

[23] Zhang X B, Ji L, Cai M et al. Research on ultrafast laser machining of film cooling hole in turbine blade[J]. Aeronautical Manufacturing Technology, 64, 14-22(2021).

[24] Ho C C, Tseng G R, Chang Y J et al. Laser percussion drilling of highly reflective metals with external interdigital electrodes[J]. Precision Engineering, 43, 43-51(2016).

[25] Wang W J, Pan A F, Mei X S. Review of multi‑scale theoretical research on ultrashort laser processing and coupling model construction (Invited)[J]. Chinese Journal of Lasers, 51, 0402407(2024).

[26] A Z W, Chen L L, Wu Y et al. Controlling of diameter and taper in ultrafast laser helical drilling[J]. Chinese Journal of Lasers, 48, 0802017(2021).

[27] Du D M, Cao M X, Gan H H et al. Processing technology of picosecond laser alumina ceramic micro-holes[J]. New Technology & New Process, 411, 22-27(2022).

[28] Xing S L, Liu L, Zou G S et al. Effects of femtosecond laser parameters on hole drilling of silica glass[J]. Chinese Journal of Lasers, 42, 0403001(2015).

[29] Long H B, Mao S C, Liu Y N et al. Microstructural and compositional design of Ni-based single crystalline superalloys: a review[J]. Journal of Alloys and Compounds, 743, 203-220(2018).