[2] Gong X, Short M P, Auger T et al. Environmental degradation of structural materials in liquid lead- and lead-bismuth eutectic-cooled reactors[J]. Progress in Materials Science, 126, 100920(2022).

[4] Was G S. Challenges to the use of ion irradiation for emulating reactor irradiation[J]. Journal of Materials Research, 30, 1158-1182(2015).

[5] HUANG Qunying, LI Chunjing, LI Yanfen et al. R&D status of China low activation martensitic steel[J]. Chinese Journal of Nuclear Science and Engineering, 27, 41-50, 85(2007).

[6] Haynes W M[M]. CRC handbook of chemistry and physics(2016).

[7] Schroer C, Konys J. Physical chemistry of corrosion and oxygen control in liquid lead and lead-bismuth eutectic[M](2007).

[8] Xu C H, Gao W, He Y D. High temperature oxidation behaviour of FeAl intermetallics: oxide scales formed in ambient atmosphere[J]. Scripta Materialia, 42, 975-980(2000).

[9] Eldridge J, Komarek K L. Thermodynamic properties of solid iron-aluminumalloys[J]. The Journal of Physical Chemistry, 230, 226(1964).

[10] Wang W, Zhu Z G, Yang L J et al. Superior corrosion resistance of a slurry FeAl coating on 316LN stainless steel in 550 ℃ liquid lead-bismuth eutectic[J]. Corrosion Science, 227, 111757(2024).

[11] Yurechko M, Schroer C, Skrypnik A et al. Creep-to-rupture of the steel P92 at 650 ℃ in oxygen-controlled stagnant lead in comparison to air[J]. Journal of Nuclear Materials, 432, 78-86(2013).

[12] Xiao J, Zhong Z H, Wen T et al. Synergy of stress and corrosion in a 12Cr ferritic/martensitic steel exposed to static liquid lead-bismuth eutectic at 550 ℃[J]. Corrosion Science, 222, 111404(2023).

[13] Zhu Z G, Zhang Q, Tan J B et al. Corrosion behavior of T91 steel in liquid lead-bismuth eutectic at 550 ℃: Effects of exposure time and dissolved oxygen concentration[J]. Corrosion Science, 204, 110405(2022).

[14] Sapundjiev D, Van Dyck S, Bogaerts W. Liquid metal corrosion of T91 and A316L materials in Pb-Bi eutectic at temperatures 400–600 ℃[J]. Corrosion Science, 48, 577-594(2006).

[15] Tsisar V, Schroer C, Wedemeyer O et al. Corrosion interaction of 9% Cr ferritic/martensitic steels at 450 and 550 ℃ with flowing Pb-Bi eutectic containing 10–7 mass% dissolved oxygen[J]. Journal of Nuclear Engineering and Radiation Science, 5, 031201(2019).

[16] Schroer C, Tsisar V, Durand A et al. Corrosion in iron and steel T91 caused by flowing lead–bismuth eutectic at 400 ℃ and 10–7 mass% dissolved oxygen[J]. Journal of Nuclear Engineering and Radiation Science, 5, 011006(2019).

[17] Schroer C, Voß Z, Wedemeyer O et al. Oxidation of steel T91 in flowing lead–bismuth eutectic (LBE) at 550 ℃[J]. Journal of Nuclear Materials, 356, 189-197(2006).

[18] Tian S J. Growth and exfoliation behavior of the oxide scale on 316L and T91 in flowing liquid lead–bismuth eutectic at 480 ℃[J]. Oxidation of Metals, 93, 183-194(2020).

[19] JI Xu, CHAI Xiang, ZHANG Lefu et al. Neutronics-thermal-hydraulics-material coupling study of lead-bismuth cooled reactor single rod based on oxidative corrosion characteristics[J]. Nuclear Techniques, 47, 110604(2024).

[20] ZHANG Hanzi, ZHANG Baoliang, SHEN Chuankai et al. Current progress of molecular dynamics simulation study on the corrosion of reactor alloy materials[J]. Nuclear Techniques, 47, 110001(2024).

[21] Wang J, Lu S P, Rong L J et al. Effect of silicon on the oxidation resistance of 9 wt.% Cr heat resistance steels in 550 ℃ lead-bismuth eutectic[J]. Corrosion Science, 111, 13-25(2016).

[22] Short M P, Ballinger R G, Hänninen H E. Corrosion resistance of alloys F91 and Fe-12Cr-2Si in lead-bismuth eutectic up to 715 ℃[J]. Journal of Nuclear Materials, 434, 259-281(2013).

[23] PAN Xia, ZHANG Yangpeng, DONG Zhihong et al. Effect of pre-oxidation treatment on the corrosion resistance in stagnant liquid Pb-Bi eutectic of 12Cr ferritic/martensitic steel[J]. Acta Metall Sin, 60, 639-649(2024).

[24] WU Xinqiang, RONG Lijian, TAN Jibo et al. Research advance on liquid lead-bismuth eutectic corrosion resistant Si enhanced ferritic/martensitic and austenitic stainless steels[J]. Acta Metall Sin, 59, 502-512(2023).

[25] Polekhina N A, Litovchenko I Y, Almaeva K V et al. Special features of the surface layer structure of ferritic-martensitic EP-823-Sh steel after prolonged exposure to the flowing lead at 630 ℃ under low oxygen concentration[J]. Journal of Nuclear Materials, 572, 154039(2022).

[26] Isayev R, Pukhareva N, Malinovskiy E et al. Corrosion of EP823 steel cladding under heavy-liquid-metal-coolant reactor conditions: a review[J]. Nuclear Science and Engineering, 199, 531-549(2025).

[27] Dvoriashin A M, Porollo S I, Konobeev Y V et al. Mechanical properties and microstructure of three Russian ferritic/martensitic steels irradiated in BN-350 reactor to 50 dpa at 490 ℃[J]. Journal of Nuclear Materials, 367, 92-96(2007).

[28] YANG Ke, YAN Wei, WANG Zhiguang et al. Development of a novel structural material (SIMP steel) for nuclear equipment with balanced resistances to high temperature, radiation and liquid metal corrosion[J]. Acta Metallurgica Sinica, 52, 1207-1221(2016).

[29] LU Yanhong, SONG Yuanyuan, CHEN Shenghu et al. Effects of Al and Si on mechanical properties and corrosion resistance in liquid Pb-Bi eutectic of 9Cr2WVTa steel[J]. Acta Metallurgica Sinica, 52, 298-306(2016).

[30] Schroer C, Koch V, Wedemeyer O et al. Silicon-containing ferritic/martensitic steel after exposure to oxygen-containing flowing lead–bismuth eutectic at 450 and 550 ℃[J]. Journal of Nuclear Materials, 469, 162-176(2016).

[31] Shi H, Wang H, Fetzer R et al. Influence of Si addition on the corrosion behavior of 9 wt% Cr ferritic/martensitic steels exposed to oxygen-controlled molten Pb-Bi eutectic at 550 and 600 ℃[J]. Corrosion Science, 193, 109871(2021).

[32] Yao C F, Zhang H P, Chang H L et al. Structure of surface oxides on martensitic steel under simultaneous ion irradiation and molten LBE corrosion[J]. Corrosion Science, 195, 109953(2022).

[33] Frazer D, Qvist S, Parker S et al. Degradation of HT9 under simultaneous ion beam irradiation and liquid metal corrosion[J]. Journal of Nuclear Materials, 479, 382-389(2016).

[34] Demir E, Ayyapan S, Zhou W Y et al. Behavior of Fe-based alloys in a liquid lead-bismuth environment under simultaneous proton irradiation and corrosion[J]. Acta Materialia, 284, 120578(2025).

[35] Kolman D G. A review of recent advances in the understanding of liquid metal embrittlement[J]. Corrosion, 75, 42-57(2019).

[36] Gong X, Stergar E, Marmy P et al. Tensile fracture behavior of notched 9Cr-1Mo ferritic-martensitic steel specimens in contact with liquid lead-bismuth eutectic at 350 ℃[J]. Materials Science and Engineering: A, 692, 139-145(2017).

[37] Long B, Tong Z, Gröschel F et al. Liquid Pb-Bi embrittlement effects on the T91 steel after different heat treatments[J]. Journal of Nuclear Materials, 377, 219-224(2008).

[38] Liu J, Yan W, Sha W et al. Effects of temperature and strain rate on the tensile behaviors of SIMP steel in static lead bismuth eutectic[J]. Journal of Nuclear Materials, 473, 189-196(2016).

[39] Wang H, Gong X, Xiao J et al. Liquid metal embrittlement of 12Cr ferritic/martensitic steel thin-walled tubes exposed to liquid lead-bismuth eutectic[J]. Corrosion Science, 195, 110024(2022).

[40] Di Gabriele F, Doubková A, Hojná A. Investigation of the sensitivity to EAC of steel T91 in contact with liquid LBE[J]. Journal of Nuclear Materials, 376, 307-311(2008).

[41] Hamouche-Hadjem Z, Auger T, Guillot I et al. Susceptibility to LME of 316L and T91 steels by LBE: effect of strain rate[J]. Journal of Nuclear Materials, 376, 317-321(2008).

[42] Dai Y, Long B, Jia X et al. Tensile tests and TEM investigations on LiSoR-2 to-4[J]. Journal of Nuclear Materials, 356, 256-263(2006).

[43] Long B, Dai Y, Baluc N. Investigation of liquid LBE embrittlement effects on irradiated ferritic/martensitic steels by slow-strain-rate tensile tests[J]. Journal of Nuclear Materials, 431, 85-90(2012).

[44] Gong X, Sun L, Zhang F F et al. Effect of alloying elements on liquid metal embrittlement of pure BCC Fe in contact with liquid lead-bismuth eutectic: Experiments and first principles calculation[J]. Corrosion Science, 208, 110522(2022).

[45] Gong X, Marmy P, Verlinden B et al. Low cycle fatigue behavior of a modified 9Cr-1Mo ferritic-martensitic steel in lead–bismuth eutectic at 350 ℃–Effects of oxygen concentration in the liquid metal and strain rate[J]. Corrosion Science, 94, 377-391(2015).

[46] Xue B Q, Wang W, Tan J B et al. Insights into the fatigue damage mechanism of T91 steel in liquid lead-bismuth eutectic at 150–550 ℃[J]. Corrosion Science, 232, 112007(2024).

[47] Xue B Q, Tan J B, Zhang Z Y et al. Effect of temperature on low cycle fatigue behavior of T91 steel in liquid lead-bismuth eutectic environment at 150–550 ℃[J]. International Journal of Fatigue, 167, 107344(2023).

[48] Xue B Q, Tan J B, Wu X Q et al. Strain-rate dependent fatigue behavior of T91 steel at 550 ℃ of liquid lead-bismuth eutectic[J]. Corrosion Science, 240, 112433(2024).

[49] Gong X, Marmy P, Qin L et al. Temperature dependence of liquid metal embrittlement susceptibility of a modified 9Cr-1Mo steel under low cycle fatigue in lead–bismuth eutectic at 160–450 ℃[J]. Journal of Nuclear Materials, 468, 289-298(2016).

[50] Gong X, Marmy P, Yin Y. The role of oxide films in preventing liquid metal embrittlement of T91 steel exposed to liquid lead-bismuth eutectic[J]. Journal of Nuclear Materials, 509, 401-407(2018).

[51] Gong X, Marmy P, Volodin A et al. Multiscale investigation of quasi-brittle fracture characteristics in a 9Cr-1Mo ferritic–martensitic steel embrittled by liquid lead–bismuth under low cycle fatigue[J]. Corrosion Science, 102, 137-152(2016).

[52] Jianu A, Müller G, Weisenburger A et al. Creep-to-rupture tests of T91 steel in flowing Pb-Bi eutectic melt at 550 ℃[J]. Journal of Nuclear Materials, 394, 102-108(2009).

[53] Weisenburger A, Jianu A, An W et al. Creep, creep-rupture tests of Al-surface-alloyed T91 steel in liquid lead bismuth at 500 and 550 ℃[J]. Journal of Nuclear Materials, 431, 77-84(2012).

[54] Van den Bosch J, Coen G, Almazouzi A et al. Fracture toughness assessment of ferritic–martensitic steel in liquid lead–bismuth eutectic[J]. Journal of Nuclear Materials, 385, 250-257(2009).

[55] Auger T, Gorse D, Hamouche-Hadjem Z et al. Fracture mechanics behavior of the T91 martensitic steel in contact with liquid lead–bismuth eutectic for application in an accelerator driven system[J]. Journal of Nuclear Materials, 415, 293-301(2011).

[56] Martin M L, Auger T, Johnson D D et al. Liquid–metal-induced fracture mode of martensitic T91 steels[J]. Journal of Nuclear Materials, 426, 71-77(2012).

[57] Long B, Dai Y. Investigation of LBE embrittlement effects on the fracture properties of T91[J]. Journal of Nuclear Materials, 376, 341-345(2008).

[58] Coen G, van den Bosch J, Almazouzi A et al. Investigation of the effect of lead–bismuth eutectic on the fracture properties of T91 and 316L[J]. Journal of Nuclear Materials, 398, 122-128(2010).

[59] Xue B Q, Tan J B, Wu X Q et al. Insights into fatigue crack propagation mechanism of T91 steel in liquid lead-bismuth eutectic at 150–450 ℃[J]. Corrosion Science, 236, 112264(2024).

[60] Xue B Q, Tan J B, Wu X Q et al. A novel monitoring system for fatigue crack length of compact tensile specimen in liquid lead-bismuth eutectic[J]. Nuclear Engineering and Technology, 56, 1887-1894(2024).

[61] Li C, Liu Y J, Zhang F F et al. Erosion-corrosion of 304N austenitic steels in liquid Pb Bi flow perpendicular to steel surface[J]. Materials Characterization, 175, 111054(2021).

[62] Lu C X, Wang M, Tan J B et al. The initial enrichment behavior of nickel during the oxidation of 15–15Ti at 550 ℃ in liquid lead-bismuth eutectic: a new Ni-rich structure at grain boundary[J]. Corrosion Science, 244, 112664(2025).

[63] Guo S Q, Chen J Y, Ma Z L et al. The roles of Ni segregation on the oxidation kinetics of austenitic stainless steel 316L exposed to oxygen-containing liquid lead-bismuth eutectic (LBE)[J]. Corrosion Science, 244, 112644(2025).

[64] Klok O, Lambrinou K, Gavrilov S et al. Effect of deformation twinning on dissolution corrosion of 316L stainless steels in contact with static liquid lead-bismuth eutectic (LBE) at 500  ℃[J]. Journal of Nuclear Materials, 510, 556-567(2018).

[65] Kurata Y, Futakawa M, Saito S. Comparison of the corrosion behavior of austenitic and ferritic/martensitic steels exposed to static liquid Pb-Bi at 450 and 550 ℃[J]. Journal of Nuclear Materials, 343, 333-340(2005).

[66] Tsisar V, Schroer C, Wedemeyer O et al. Effect of structural state and surface finishing on corrosion behavior of 1.4970 austenitic steel at 400 and 500 ℃ in flowing Pb-Bi eutectic with dissolved oxygen[J]. Journal of Nuclear Engineering and Radiation Science, 4, 041001(2018).

[67] Schroer C, Wedemeyer O, Novotny J et al. Long-term service of austenitic steel 1.4571 as a container material for flowing lead–bismuth eutectic[J]. Journal of Nuclear Materials, 418, 8-15(2011).

[68] Kurata Y, Futakawa M. Excellent corrosion resistance of 18Cr-20Ni-5Si steel in liquid Pb-Bi[J]. Journal of Nuclear Materials, 325, 217-222(2004).

[69] Roy M, Martinelli L, Ginestar K et al. Dissolution and oxidation behaviour of various austenitic steels and Ni rich alloys in lead-bismuth eutectic at 520 ℃[J]. Journal of Nuclear Materials, 468, 153-163(2016).

[70] Xie A, Chen S H, Yin L C et al. Microstructural evolution of the inner oxide layer of a Si-modified austenitic stainless steel exposed to oxygen-saturated lead-bismuth eutectic (LBE): Toward the origin of LBE penetration[J]. Corrosion Science, 237, 112350(2024).

[71] WU Yang, XIE Ang, CHEN Shenghu et al. Corrosion behavior of NbC and its effect on corrosion layer formation in liquid lead-bismuth eutectic of Nb-containing austenitic stainless steel[J]. Acta Metallurgica Sinica, 61, 287-296(2025).

[72] Xie A, Chen S H, Chen S H et al. Austenite decomposition behavior adjacent to δ-ferrite in a Si-modified Fe-Cr-Ni austenitic stainless steel during thermal aging at 550 ℃[J]. Acta Materialia, 272, 119948(2024).

[73] Kurata Y. Results of corrosion tests in liquid Pb-Bi at JAEA-temperature andoxygen concentration dependence, and corrosion properties of Si-enrichedsteels[C](2010).

[74] Kurata Y. Corrosion behavior of Si-enriched steels for nuclear applications in liquid lead–bismuth[J]. Journal of Nuclear Materials, 437, 401-408(2013).

[75] Zhang D C, Zhang X X, Guo Y et al. High-resolution characterization revealing the effect of dissolved oxygen in lead-bismuth eutectic (LBE) on oxide scale and subsurface phase transformation layer in alumina-forming austenitic (AFA) steel[J]. Corrosion Science, 245, 112671(2025).

[76] Zhang D C, Zhang X X, Zeng X et al. High-resolution characterization of cold working effects on the oxidation behavior of alumina-forming austenitic (AFA) steel in lead-bismuth eutectic (LBE) with 10–6 wt.% oxygen at 600 ℃[J]. Journal of Nuclear Materials, 607, 155691(2025).

[77] Shen L, Cao G Q, Lang D et al. Fe-14Ni-14Cr-2.5Al steel showing excellent corrosion-resistance in flowing LBE at 550 ℃ and high temperature strength[J]. Journal of Nuclear Materials, 587, 154703(2023).

[78] Tsisar V, Stergar E, Gavrilov S et al. Effect of variation in oxygen concentration in static Pb-Bi eutectic on long-term corrosion performance of Al-alloyed austenitic steels at 500 ℃[J]. Corrosion Science, 195, 109963(2022).

[79] Sapundjiev D, Al Mazouzi A, Van Dyck S. A study of the neutron irradiation effects on the susceptibility to embrittlement of A316L and T91 steels in lead–bismuth eutectic[J]. Journal of Nuclear Materials, 356, 229-236(2006).

[80] Van den Bosch J, Coen G, Bosch R W et al. TWIN ASTIR: First tensile results of T91 and 316L steel after neutron irradiation in contact with liquid lead–bismuth eutectic[J]. Journal of Nuclear Materials, 398, 68-72(2010).

[81] Stergar E, Eremin S G, Gavrilov S et al. Influence of LBE long term exposure and simultaneous fast neutron irradiation on the mechanical properties of T91 and 316L[J]. Journal of Nuclear Materials, 473, 28-34(2016).

[82] Petersson C, Szakalos P, Pettersson R et al. Influence of liquid lead and lead-bismuth eutectic on three alumina forming austenitic (AFA) steels through slow strain rate testing[J]. Journal of Nuclear Materials, 603, 155415(2025).

[83] Proriol Serre I, Vogt J B. Mechanical behavior in liquid lead of Al2O3 coated 15-15Ti steel and an Alumina-Forming Austenitic steel designed to mitigate their corrosion[J]. Engineering Failure Analysis, 139, 106443(2022).

[84] Gong X, Yang Z B, Deng Y B et al. Creep failure of a solution-annealed 15-15Ti steel exposed to stagnant lead-bismuth eutectic at 550 and 600 ℃[J]. Materials Science and Engineering: A, 798, 140230(2020).

[85] Yas'kiv O I, Fedirko V M, Kukhar I S. Effect of lead and lead–bismuth eutectic melts on the fatigue life of steels of the martensitic and austenitic classes[J]. Materials Science, 50, 102-108(2014).

[86] Ding J, Tan J, Zhang Z. Low cycle fatigue behavior of 316LN stainless steel hollow specimen in air and liquid lead–bismuth eutectic[J]. International Journal of Fatigue, 175, 107812(2023).

[87] Kalkhof D, Grosse M. Influence of PbBi environment on the low-cycle fatigue behavior of SNS target container materials[J]. Journal of Nuclear Materials, 318, 143-150(2003).

[88] Marmy P, Gong X. LIMETS 3, a novel system for high strain fatigue testing in lead–bismuth eutectic[J]. Journal of Nuclear Materials, 450, 256-261(2014).

[89] Chocholousek M, Stergar E, Gong X et al. Report for mechanical/microstructural characteristics of environmentally-assisted degradation effects of steels in lead alloys and assessment of environmental degradation effects on performance of structural and functional components of MYRRHA ADS & LFR. MatISSE–D5.42[R](2017).

[90] Xue B Q, Tan J B, Wu X Q et al. Unveiling liquid Pb-Bi embrittlement of 316LN stainless steel under fatigue crack propagation tests through multiscale advanced characterization[J]. Corrosion Science, 246, 112752(2025).

[91] Huang Y J, Meng F Q, Shi J J et al. Crevice corrosion behavior of 316L austenitic steel in static liquid lead-bismuth eutectic at 550 ℃[J]. Journal of Nuclear Materials, 603, 155441(2025).

[92] Ludwig W, Pereiro-López E, Bellet D. In situ investigation of liquid Ga penetration in Al bicrystal grain boundaries: grain boundary wetting or liquid metal embrittlement[J]. Acta Materialia, 53, 151-162(2005).

[93] Nam H S, Srolovitz D J. Molecular dynamics simulation of Ga penetration along grain boundaries in Al: a dislocation climb mechanism[J]. Physical Review Letters, 99, 025501(2007).

[94] Luo J, Cheng H K, Asl K M et al. The role of a bilayer interfacial phase on liquid metal embrittlement[J]. Science, 333, 1730-1733(2011).

[95] Yu Z, Cantwell P R, Gao Q et al. Segregation-induced ordered superstructures at general grain boundaries in a nickel-bismuth alloy[J]. Science, 358, 97-101(2017).

[96] Duscher G, Chisholm M F, Alber U et al. Bismuth-induced embrittlement of copper grain boundaries[J]. Nature Materials, 3, 621-626(2004).