Researching | Effect of Filler Metal on Three-Dimensional Transient Behavior of Keyholes and Molten Pools in Laser Welding

Chinese Journal of Lasers, Volume. 45, Issue 1, 102003(2018)

Effect of Filler Metal on Three-Dimensional Transient Behavior of Keyholes and Molten Pools in Laser Welding

Peng Jin^1,2、*, Hu Sumeng¹, Wang Xingxing¹, Wang Jiansheng¹, and Zhang Furong²

Author Affiliations

¹[in Chinese]

²[in Chinese]

show less

Abstract Get PDF(in Chinese)

Figures&Tables (16)

References (17)

Paper Information

References(17)

[1] Chen G Y, Xia H L, Zhou C et al. Study on the mechanism of root humping of laser welding with high power fiber laser[J]. Chinese Journal of Lasers, 42, 0203004(2015).

[2] Peng J, Li L Q, Zhang R Z et al. Study on aluminum alloy laser welding with pre-melted liquid filler by arc[J]. Laser & Optoelectronics Progress, 54, 061404(2017).

[4] Qiao J N, Wang Q M, Zou J L et al. Microstructure and mechanical property of A7N01 aluminum alloy joints by fiber laser-variable polarity TIG hybrid welding with filler wire[J]. Chinese Journal of Lasers, 43, 0902001(2016).

[5] Peng J, Li L Q, Lin S Y et al. High-speed X-ray transmission and numerical study of melt flows inside the molten pool during laser welding of aluminum alloy[J]. Mathematical Problems in Engineering, 2016, 1-13(2016). http://www.researchgate.net/publication/315516303_High-Speed_X-Ray_Transmission_and_Numerical_Study_of_Melt_Flows_inside_the_Molten_Pool_during_Laser_Welding_of_Aluminum_Alloy

[6] Kabir A S H, Cao X, Wanjara P et al. . Use of filler wire for laser welding of Ti-6Al-4V[J]. Canadian Metallurgical Quarterly, 51, 320-327(2012). http://www.tandfonline.com/doi/full/10.1179/1879139512Y.0000000016

[7] Wu Y, Cai Y, Wang H et al. Investigation on microstructure and properties of dissimilar joint between SA553 and SUS304 made by laser welding with filler wire[J]. Materials & Design, 87, 567-578(2015). http://www.sciencedirect.com/science/article/pii/S0264127515303257

[8] Yu Y C, Wang C M, Hu X Y et al. Porosity in fiber laser formation of 5A06 aluminum alloy[J]. Journal of Mechanical Science and Technology, 24, 1077-1082(2010). http://link.springer.com/article/10.1007/s12206-010-0309-4

[9] Mei H H, Xiao R S, Zuo T C. The study on laser welding with filler wire[J]. Journal of Beijing Polytechnic University, 22, 38-42(1996).

[10] Wang H, Shi Y W, Gong S L. Numerical simulation of laser keyhole welding processes based on control volume methods[J]. Journal of Physics D: Applied Physics, 39, 4722-4730(2006). http://adsabs.harvard.edu/abs/2006JPhD...39.4722W

[11] Zhao H Y, Niu W C, Zhang B et al. Modelling of keyhole dynamics and porosity formation considering the adaptive keyhole shape and three-phase coupling during deep-penetration laser welding[J]. Journal of Physics D: Applied Physics, 44, 485302(2011). http://adsabs.harvard.edu/abs/2011JPhD...44V5302Z

[12] Lu F G, Li X B, Li Z G et al. Formation and influence mechanism of keyhole-induced porosity in deep-penetration laser welding based on 3D transient modeling[J]. International Journal of Heat and Mass Transfer, 90, 1143-1152(2015). http://www.sciencedirect.com/science/article/pii/S0017931015007504

[13] Cho J H, Na S J. Three-dimensional analysis of molten pool in GMA-laser hybrid welding[J]. Welding journal, 80, 35-44(2009). http://www.researchgate.net/publication/287928578_Three-Dimensional_Analysis_of_Molten_Pool_in_GMA-Laser_Hybrid_Welding

[14] Rao Z H, Liao S M, Tsai H L. Modelling of hybrid laser-GMA welding: Review and challenges[J]. Science and Technology of Welding and Joining, 16, 300-305(2011). http://www.tandfonline.com/doi/abs/10.1179/1362171811Y.0000000022

[15] Otto A, Schmidt M. Towardsa universal numerical simulation model for laser material processing[J]. Physics Procedia, 5, 35-46(2010). http://www.sciencedirect.com/science/article/pii/S1875389210005468

[16] Voller V R, Prakash C. A fixed grid numerical modeling methodology for convection-diffusion mushy region phase-change problems[J]. International Journal of Heat and Mass Transfer, 30, 1709-1719(1987). http://www.sciencedirect.com/science/article/pii/0017931087903176

[17] Peng J, Li F Q, Li L Q et al. Comparative Study on laser welding with pre-melting liquid filler and conventional filler wire[J]. Chinese Journal of Lasers, 42, 0103003(2015).

[18] Kawahito Y, Mizutani M, Katayama S. Elucidation of high-power fibre laser welding phenomena of stainless steel and effect of factors on weld geometry[J]. Journal of Physics D: Applied Physics, 40, 5854-5859(2007). http://adsabs.harvard.edu/abs/2007JPhD...40.5854K

Tools

Get Citation

Copy Citation Text

Peng Jin, Hu Sumeng, Wang Xingxing, Wang Jiansheng, Zhang Furong. Effect of Filler Metal on Three-Dimensional Transient Behavior of Keyholes and Molten Pools in Laser Welding[J]. Chinese Journal of Lasers, 2018, 45(1): 102003

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: laser manufacturing

Received: Jul. 18, 2017

Accepted: --

Published Online: Jan. 24, 2018

The Author Email: Jin Peng (pengjin1985120@163.com)

DOI:10.3788/CJL201845.0102003

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology