[1] Cai W, Sun D Y, Zhou M H et al. Third generation wide bandgap power semiconductors and their applications[J]. Science & Technology Review, 39, 42-55(2021).

[2] Li L, Shen Y, Chai X Y et al. Development prospect of semiconductor materials in electronic science and technology[J]. China New Telecommunications, 21, 60-61(2019).

[3] Zhang Y X, Gao W, Kang R K et al. TEM observation on the ground damage of monocrystalline silicon wafers[J]. Journal of Semiconductors, 29, 1552-1556(2008).

[4] Li X C, Lü J J, Yang S R. Sliding wear behavior and phase transformation of single crystal silicon[J]. Tribology, 24, 326-331(2004).

[5] Luo Q F, Lu J, Xu X P. A comparative study on the material removal mechanisms of 6H-SiC polished by semi-fixed and fixed diamond abrasive tools[J]. Wear, 350, 99-106(2016).

[6] Chen B W, Sun S F, Wang X et al. Research progress of laser polishing technology for material surface[J]. China Surface Engineering, 34, 74-89(2021).

[7] Hu X K, Song Z T, Wang H B et al. Investigation on the controllable growth of monodisperse silica colloid abrasives for the chemical mechanical polishing application[J]. Microelectronic Engineering, 87, 1751-1755(2010).

[8] Neslen C L, Mitchel W C, Hengehold R L. Effects of process parameter variations on the removal rate in chemical mechanical polishing of 4H-SiC[J]. Journal of Electronic Materials, 30, 1271-1275(2001).

[9] Lee H, Kim M, Jeong H. Effect of non-spherical colloidal silica particles on removal rate in oxide CMP[J]. International Journal of Precision Engineering and Manufacturing, 16, 2611-2616(2015).

[10] Nitta H, Isobe A, Hong P J et al. Research on reaction method of high removal rate chemical mechanical polishing slurry for 4H-SiC substrate[J]. Japanese Journal of Applied Physics, 50, 046501(2011).

[11] Zhou Y, Pan G S, Shi X L et al. XPS, UV–VIS spectroscopy and AFM studies on removal mechanisms of Si-face SiC wafer chemical mechanical polishing (CMP)[J]. Applied Surface Science, 316, 643-648(2014).

[12] Ballarin N, Carraro C, Maboudian R et al. Electropolishing of n-type 3C-polycrystalline silicon carbide[J]. Electrochemistry Communications, 40, 17-19(2014).

[13] Wysocki B, Idaszek J, Buhagiar J et al. The influence of chemical polishing of titanium scaffolds on their mechanical strength and in-vitro cell response[J]. Materials Science and Engineering: C, 95, 428-439(2019).

[14] Liu J W, Jiang L, Wu H Q et al. 5-methyl-1H-benzotriazole as an effective corrosion inhibitor for ultra-precision chemical mechanical polishing of bearing steel[J]. Journal of the Electrochemical Society, 167, 131502(2020).

[15] Yin D, Yang L, Ma T D et al. Synergistic effect of composite complex agent on BTA removal in post CMP cleaning of copper interconnection[J]. Materials Chemistry and Physics, 252, 123230(2020).

[16] Pang R, Zhang X L. Achieving environmental sustainability in manufacture: a 28-year bibliometric cartography of green manufacturing research[J]. Journal of Cleaner Production, 233, 84-99(2019).

[17] Xiong X Q, Ma Q R, Yuan Y Y et al. Current situation and key manufacturing considerations of green furniture in China: a review[J]. Journal of Cleaner Production, 267, 121957(2020).

[18] Chen L, Yang Y Q. Laser polishing[J]. Laser & Optoelectronics Progress, 40, 57-59(2003).

[19] Jiang C, Wang Y Q, Hu S L. Development and expectation of laser polishing technology[J]. Laser Technology, 26, 421-424(2002).

[20] Ma G Y, Chen X X, Chen T et al. Surface quality of silicon carbide ceramics polished by coupled laser based on bidirectional spot overlap ratio regulation[J]. Chinese Journal of Lasers, 50, 1602209(2023).

[21] Huang J F, Wei X, Xie X Z et al. Research on influences of condition parameters on laser polishing process[J]. Laser & Optoelectronics Progress, 45, 20-24(2008).

[22] Li T, Huang W Q, Long G et al. Surface topography evolution of single crystal silicon in laser polishing[J]. Journal of Mechanical Engineering, 59, 52-64(2023).

[23] He Y. Study on the technique and mechanism of photocatalysis assisted polishing silicon carbide wafer[D](2019).

[24] Chen H, Wei C Y, Cao Z et al. Study of femtosecond laser ablation and polishing process on RB-SiC surface[J]. Chinese Journal of Lasers, 50, 2402203(2023).

[25] Yang X, Yang X Z, Kawai K et al. Highly efficient planarization of sliced 4H-SiC (0001) wafer by slurryless electrochemical mechanical polishing[J]. International Journal of Machine Tools and Manufacture, 144, 103431(2019).

[26] Zhou Y, Pan G S, Shi X L et al. Chemical mechanical planarization (CMP) of on-axis Si-face SiC wafer using catalyst nanoparticles in slurry[J]. Surface and Coatings Technology, 251, 48-55(2014).

[27] Yuan Z W, He Y, Sun X W et al. UV-TiO2 photocatalysis-assisted chemical mechanical polishing 4H-SiC wafer[J]. Materials and Manufacturing Processes, 33, 1214-1222(2018).

[28] Lu J B, Chen R, Liang H Z et al. The influence of concentration of hydroxyl radical on the chemical mechanical polishing of SiC wafer based on the Fenton reaction[J]. Precision Engineering, 52, 221-226(2018).

[29] Deng H, Endo K, Yamamura K. Damage-free finishing of CVD-SiC by a combination of dry plasma etching and plasma-assisted polishing[J]. International Journal of Machine Tools and Manufacture, 115, 38-46(2017).

[30] Deng H, Endo K, Yamamura K. Comparison of thermal oxidation and plasma oxidation of 4H-SiC (0001) for surface flattening[J]. Applied Physics Letters, 104, 101608(2014).

[31] Li L, He Q, Zheng M et al. Improvement in polishing effect of silicon wafer due to low-amplitude megasonic vibration assisting chemical-mechanical polishing[J]. Journal of Materials Processing Technology, 263, 330-335(2019).

[32] Long J Y, Eliceiri M H, Ouyang Y X et al. Effects of immersion depth on the dynamics of cavitation bubbles generated during ns laser ablation of submerged targets[J]. Optics and Lasers in Engineering, 137, 106334(2021).

[33] Guo Y, Qiu P, Xu S L et al. Laser-induced microjet-assisted ablation for high-quality microfabrication[J]. International Journal of Extreme Manufacturing, 4, 035101(2022).

[34] Kim M, Bang S M, Kim D H et al. Hybrid CO2 laser-polishing process for improving material removal of silicon carbide[J]. The International Journal of Advanced Manufacturing Technology, 106, 3139-3151(2020).

[35] Zhao Q L, Jiang T, Dong Z W et al. Ablation threshold and material removal mechanisms of SiC processed by femtosecond laser[J]. Journal of Mechanical Engineering, 46, 172-177(2010).

[36] Ion J C. Laser processing of engineering materials[M]. Laser processing of engineering materials, 41-103(2005).

[37] Wang J P, He D G, Zhao W Y. Research status and application prospect of silicon carbide materials[J]. Equipment for Electronic Products Manufacturing, 47, 23-26(2018).

[38] Xu H M, Wang J B, Li Q A et al. Research progress of chemical mechanical polishing technology of silicon carbide wafer[J]. Modern Manufacturing Engineering, 153-161, 116(2022).

[39] Li C R, Xie Z P, Kang G X et al. Research and application progress of SiC ceramics: a review[J]. Bulletin of the Chinese Ceramic Society, 39, 1353-1370(2020).

[40] Xu Y F, Shao J Z, Lin Y et al. Research progress in laser surface polishing of hard and brittle materials[J]. Laser & Optoelectronics Progress, 59, 1300003(2022).

[41] Song Y, Wang H P, Wang Q et al. Research and application of laser fine surface processing technology: cleaning and polishing[J]. Aeronautical Manufacturing Technology, 61, 78-86(2018).

[42] Luo Y, Wu X B, Zhou Y et al. Interaction between excimer laser and SiC ceramic[J]. Laser & Optoelectronics Progress, 53, 121403(2016).

[43] Li W B. Research on femtosecond laser purse polishing of silicon carbide ceramic material[D](2011).

[44] Li Z D. Study on laser polishing mechanism and technology of 6H silicon carbide monocrystal and YBCO superconducting film[D](2017).

[45] An H, Qian Y F, Zhang L et al. On the surface characteristics and removability of RB-SiC composite processed by nanosecond pulsed laser[J]. Composites Part A: Applied Science and Manufacturing, 180, 108082(2024).

[46] Xue Y D, Fu W, Wang H J et al. Facile and eco-friendly fabrication of superhydrophilic and superhydrophobic SiC surfaces by nanosecond laser treatment[J]. Journal of Laser Applications, 35, 032012(2023).

[47] Gao B, Guo D, Zhang X et al. Picosecond laser-assisted chemical mechanical polishing (CMP): aiming at the Si-face of single-crystal 6H-SiC wafer[J]. ECS Journal of Solid State Science and Technology, 10, 044008(2021).

[48] Liu H X, Li Z P, Li J J et al. Removal mechanism on 4H-SiC single crystal by picosecond laser ablation-assisted chemical mechanical polishing (CMP)[J]. Ceramics International, 50, 13266-13275(2024).

[49] Zhang R, Huang C Z, Wang J et al. Micromachining of 4H-SiC using femtosecond laser[J]. Ceramics International, 44, 17775-17783(2018).

[50] Xu G, Dai Y T, Xiao X. Study on mathematical modeling and experiment of ultrashort laser polishing micro-processing[J]. Chinese Journal of Lasers, 40, 0603003(2013).

[51] Wu D J, Liu C, Yang F et al. Effect of femtosecond laser processing parameters on RB-SiC surface morphology[J]. Surface Technology, 53, 162-169(2024).

[52] Wang C W, Kurokawa S, Doi T et al. The polishing effect of SiC substrates in femtosecond laser irradiation assisted chemical mechanical polishing (CMP)[J]. ECS Journal of Solid State Science and Technology, 6, P105-P112(2017).

[53] Chen G P, Li J G, Luo H M et al. One-step fabrication of fine surfaces via femtosecond laser on sliced SiC[J]. Materials Science in Semiconductor Processing, 132, 105926(2021).

[54] Okada T, Kawahara H, Ishida Y et al. Cross-sectional TEM analysis of laser-induced ripple structures on the 4H-SiC single-crystal surface[J]. Applied Physics A, 92, 665-668(2008).

[55] Sugioka K, Cheng Y. Ultrafast lasers: reliable tools for advanced materials processing[J]. Light: Science & Applications, 3, e149(2014).

[56] Stratakis E. Nanomaterials by ultrafast laser processing of surfaces[J]. Science of Advanced Materials, 4, 407-431(2012).

[57] Samant A N, Dahotre N B. Laser machining of structural ceramics: a review[J]. Journal of the European Ceramic Society, 29, 969-993(2009).

[58] Tam H Y, Cheng H B, Wang Y W. Removal rate and surface roughness in the lapping and polishing of RB-SiC optical components[J]. Journal of Materials Processing Technology, 192, 276-280(2007).

[59] Li Z L, Lee W B, Cheung B C F et al. A study of computer controlled ultra-precision polishing of silicon carbide reflecting lenses for enhancing surface roughness[J]. Key Engineering Materials, 625, 437-445(2014).

[60] Klocke F, Zunke R. Removal mechanisms in polishing of silicon based advanced ceramics[J]. CIRP Annals, 58, 491-494(2009).

[61] Ho J K, Huang C Y, Tsai M Y et al. Investigation of polishing pads impregnated with Fe and Al2O3 particles for single-crystal silicon carbide wafers[J]. Applied Sciences, 6, 89(2016).

[62] Liu G L, Huang Z R, Liu X J et al. Removal behaviors of different SiC ceramics during polishing[J]. Journal of Materials Science & Technology, 26, 125-130(2010).

[63] Gu Y, Zhu W H, Lin J Q et al. Investigation of silicon carbide ceramic polishing by simulation and experiment[J]. Advances in Mechanical Engineering, 9, 168781401772909(2017).

[64] Tsai M Y, Wang S M, Tsai C C et al. Investigation of increased removal rate during polishing of single-crystal silicon carbide[J]. The International Journal of Advanced Manufacturing Technology, 80, 1511-1520(2015).

[65] Liu H X, Li Z P, Li J J et al. Removal mechanism on 4H-SiC single crystal by picosecond laser ablation-assisted chemical mechanical polishing (CMP)[J]. Ceramics International, 50, 13266-13275(2024).

[66] Kubota A, Hatasako Y, Takita T et al. Abrasive-free polishing of single-crystal 4H-SiC with silica glass plates[J]. ECS Journal of Solid State Science and Technology, 4, P468-P475(2015).

[67] Kim S H, Byun K H, Sohn I B et al. Progressive formation of fine and coarse ripples on SiC surface by repeated irradiation of femtosecond laser pulses[J]. Applied Physics B, 113, 395-402(2013).

[68] Tomita T, Kinoshita K, Matsuo S et al. Effect of surface roughening on femtosecond laser-induced ripple structures[J]. Applied Physics Letters, 90, 153115(2007).

[69] Chen Y D, Liu H Y, Cheng C Y et al. Comparison of C face (0001) and Si face (0001) of silicon carbide wafers in femtosecond laser irradiation assisted chemical-mechanical polishing process[J]. Applied Physics A, 128, 1094(2022).

[70] Zhang X H, Wen D D, Deng Z H et al. Study on the grinding behavior of laser-structured grinding in silicon nitride ceramic[J]. The International Journal of Advanced Manufacturing Technology, 96, 3081-3091(2018).

[71] Zheng Q Z, Cui J L, Fan Z J et al. Investigation on the underwater femtosecond laser polishing SiC ceramic[J]. Ferroelectrics, 564, 28-36(2020).

[72] Zhang K J, Liu L, Zeng Q W et al. Influence of different scattering medium on propagation characteristics to femtosecond laser pulses[J]. Acta Physica Sinica, 68, 194207(2019).

[73] Lian Y L, Jiang L, Sun J Y et al. Ultrafast quasi-three-dimensional imaging[J]. International Journal of Extreme Manufacturing, 5, 045601(2023).

[74] Aglyamov S R, Karpiouk A B, Bourgeois F et al. Ultrasound measurements of cavitation bubble radius for femtosecond laser-induced breakdown in water[J]. Optics Letters, 33, 1357-1359(2008).

[75] Preston F W. The theory and design of plate glass polishing machines[J]. Journal of the Society of Glass Technology, 11, 214-256(1927).