[1] Xu B S. Remanufacture engineering and its development in China[J]. China Surface Engineering, 23, 1-6(2010).

[2] Wei S G, Cheng D B, Sundin E et al. Motives and barriers of the remanufacturing industry in China[J]. Journal of Cleaner Production, 94, 340-351(2015). http://www.sciencedirect.com/science/article/pii/S0959652615001183

[3] Tseng W C, Aoh J N. Simulation study on laser cladding on preplaced powder layer with a tailored laser heat source[J]. Optics & Laser Technology, 48, 141-152(2013). http://www.sciencedirect.com/science/article/pii/S0030399212004227

[4] Li J Z, Li X F, Zuo D W et al. Process test and temperature field simulation of the Al/Ti laser cladding coating above 7050 aluminum alloy[J]. Laser & Optoelectronics Progress, 51, 121403(2014).

[5] Boutalbi N, Bouaziz M N, Allouche M. Influence of temperature-dependent absorptivity on solid surface heated by CO2 and Nd∶YAG lasers[J]. Journal of Laser Applications, 28, 032004(2016). http://scitation.aip.org/content/lia/journal/jla/28/3/10.2351/1.4947311

[6] Farahmand P, Kovacevic R. An experimental-numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser[J]. Optics & Laser Technology, 63, 154-168(2014). http://www.sciencedirect.com/science/article/pii/S0030399214001066

[7] Sun L, Wei C Q, Sui X M et al. Effects of SiC particle size on microstructures and properties of TiNi based cladding layers[J]. Chinese Journal of Lasers, 45, 0502002(2018).

[8] Xiao Y, Gu J F, Zhang J X et al. Effects of nano-CeO2 doping on microstructure and wear performance of laser-clad Fe/Cr3 C2 alloy composite coating[J]. Materials Review, 31, 65-69, 84(2017).

[9] Bax B, Schäfer M, Pauly C et al. Coating and prototyping of single-phase iron aluminide by laser cladding[J]. Surface and Coatings Technology, 235, 773-777(2013). http://www.sciencedirect.com/science/article/pii/S0257897213008426

[10] Huang Y L, Wen B X, Huang M. Characteristics of the temperature field and formation of the microstructure for laser cladding processing[J]. Applied Laser, 37, 629-633(2017).

[11] Zhang G Y, Wang C L, Gao Y. Mechanism of rare earth CeO2 on the Ni-based laser cladding layer of 6063Al surface[J]. Rare Metal Materials and Engineering, 45, 1003-1007(2016).

[12] Wu D J, Chen Y X, Lu W F et al. Dilution characters of Al2O3-13wt%TiO2 coating by direct laser cladding on titanium alloy[J]. Rare Metal Materials and Engineering, 41, 2105-2108(2012).

[13] Hua L, Tian W, Liao W H et al. Fatigue life evaluation for laser cladding component based on non-linear continuum fatigue damage model[J]. Chinese Journal of Lasers, 42, 0903006(2015).

[14] Song J L, Li Y T, Deng Q L et al. Research progress of laser cladding forming technology[J]. Journal of Mechanical Engineering, 46, 29-39(2010).

[15] Liu Q C, Janardhana M, Hinton B et al. Laser cladding as a potential repair technology for damaged aircraft components[J]. International Journal of Structural Integrity, 2, 314-331(2011). http://www.emeraldinsight.com/doi/full/10.1108/17579861111162914

[16] Fang J X, Dong S Y, Xu B S et al. Study of stresses of laser metal deposition using FEM considering phase transformation effects[J]. Chinese Journal of Lasers, 42, 0503009(2015).

[17] Dai D P, Jiang X H, Cai J P et al. Numerical simulation of temperature field and stress distribution in Inconel718 Ni base alloy induced by laser cladding[J]. Chinese Journal of Lasers, 42, 0903005(2015).

[18] Li M Y, Cai C B, Han B et al. Numerical simulation of preheating on temperature and stress fields by laser cladding Ni-based ceramic coating[J]. Transactions of Materials and Heat Treatment, 36, 197-203(2015).

[19] Gong X Y, Gao S Y, Xian S Y et al. Warp deformation in single-track laser cladding based on temperature characteristics[J]. Laser & Optoelectronics Progress, 54, 101410(2017).

[20] Li M Y, Han B, Cai C B et al. 36(5): 25-28[J]. stress fields of laser cladded Ni-based coating. Transactions of the China Welding Institution, 32, 114(2015).

[21] Liu Y C, Fan C F, Yin X L et al. Temperature and stress analysis of dual-beam laser cladding on gray cast iron surface[J]. Applied Laser, 34, 288-293(2014).

[22] Ren Z H, Wu M P, Tang Y H et al. Numerical simulation and experimental research of laser cladding based on thermo-mechanical coupling[J]. Laser & Optoelectronics Progress, 56, 051404(2019).

[23] Liu S D, Peng C Y, Ma M X et al. Effect of Mn contents on the phase transition of the high entropy alloy prepared by laser cladding[J]. Materials Science Forum, 849, 64-70(2016). http://zh.scientific.net/MSF.849.64

[24] Zeng C. A study of thermal damage for laser cladding technology and its detection[D]. Nanjing: Nanjing University of Aeronautics and Astronautics(2013).

[25] Pan H, Zhao J F, Liu Y L et al. Controllability research on dilution ratio of nickel-based superalloy by laser cladding reparation[J]. Chinese Journal of Lasers, 40, 0403007(2013).

[26] Ren Z H, Wu M P, Li G Y et al. Effect of TiO2/CeO2 on microstructures and properties of Ni-based laser cladding layers[J]. Laser & Optoelectronics Progress, 56, 071402(2019).

[27] Shu X Y, Hu L L, Li G F et al. High-temperature oxidation resistance of the Ni60Ti alloy: an experimental and first-principles study[J]. Journal of Alloys and Compounds, 706, 297-304(2017). http://www.sciencedirect.com/science/article/pii/S0925838817306588

[28] Yu X X, Yin D F, Yu Z M et al. Effects of cerium addition on solidification behaviour and intermetallic structure of novel Al-Cu-Li alloys[J]. Rare Metal Materials and Engineering, 45, 1423-1429(2016).

[29] Chen R, Xu Q Y, Liu B C. Cellular automaton simulation of three-dimensional dendrite growth in Al-7Si-Mg ternary aluminum alloys[J]. Computational Materials Science, 105, 90-100(2015). http://www.sciencedirect.com/science/article/pii/S0927025615002736

[30] Adebiyi D I. Popoola A P I. Mitigation of abrasive wear damage of Ti-6Al-4V by laser surface alloying[J]. Materials & Design, 74, 67-75(2015). http://www.sciencedirect.com/science/article/pii/S0261306915000564