[1] Zhu G D, Wang S R, Cheng W et al. Corrosion and wear performance of aircraft skin after laser cleaning[J]. Optics & Laser Technology, 132, 106475(2020).

[2] Zhang G X, Hua X M, Huang Y et al. Investigation on mechanism of oxide removal and plasma behavior during laser cleaning on aluminum alloy[J]. Applied Surface Science, 506, 144666(2020).

[3] Zhou C, Li H G, Chen G Y et al. Effect of single pulsed picosecond and 100 nanosecond laser cleaning on surface morphology and welding quality of aluminium alloy[J]. Optics & Laser Technology, 127, 106197(2020).

[4] Wan Z, Yang X F, Xia G F et al. Effect of laser power on cleaning mechanism and surface properties[J]. Applied Optics, 59, 9482-9490(2020).

[5] Tan D H, Lu D S. Study of laser cleaning threshold and damage threshold[J]. Laser & Optoelectronics Progress, 34, 17-20(1997).

[6] Ma W Q, Wang L L, Zhang P Q et al. Surface damage and threshold determination of Ge-As-Se glasses in femtosecond pulsed laser micromachining[J]. Journal of the American Ceramic Society, 103, 94-102(2020).

[7] Shi W, Shang X Y, Su J H et al. Terahertz inspection of laser-induced damage of fused silica[J]. Chinese Journal of Lasers, 46, 0614018(2019).

[8] Wang T, Zhao Y A, Huang J B et al. Accumulation effect of multi-shot laser-induced damage to optical coatings[J]. High Power Laser & Particle Beams, 17, 171-174(2005).

[9] Guo M, Zhang Y X, Li H. Thermal damage of monocrystalline silicon by multi-pulsed millisecond laser[J]. Advanced Engineering Sciences, 52, 199-205(2020).

[10] Wang R, Yang J J, Liang C Y et al. Femtosecond laser ablation of silicon wafers in air and water[J]. Acta Physica Sinica, 58, 5429-5435(2009).

[11] Tian Z, Lei Z L, Chen X et al. Evaluation of laser cleaning for defouling of marine biofilm contamination on aluminum alloys[J]. Applied Surface Science, 499, 144060(2020).

[12] Kravchenko Y V, Klimentov S M, Derzhavin S I et al. Optimization of laser cleaning conditions using multimode short-pulse radiation[J]. Optical and Quantum Electronics, 52, 1-10(2020).

[13] Lei Z L, Sun H R, Chen Y B et al. Elimination of rusting layer from high-strength steel surface using different laser cleaning methods[J]. Chinese Journal of Lasers, 46, 0702003(2019).

[14] Shi T Y, Zhou L Z, Wang C M et al. Machine vision-based real-time monitor system for laser cleaning aluminum alloy[J]. Chinese Journal of Lasers, 46, 0402007(2019).

[15] Dai J Y, Tang F Q. Design and implementation of laser cleaning control system based on FPGA[J]. Chinese Journal of Lasers, 47, 0402005(2020).

[16] Chen S Q, Xu C F, He J. Design and realization of a new laser display system with multiple channels[J]. Journal of Image and Graphics, 14, 365-369(2009).

[17] Tong Y Q, Lu Q H, Zhou J Z et al. On-line plasma spectrum detection of laser cleaning of aluminum alloy before welding[J]. Spectroscopy and Spectral Analysis, 40, 255-260(2020).

[18] Zhou X K, Mi G Y, Liu S et al. Laser lap welding of 304 stainless steel/T2 red copper ultra-thin sheets[J]. Chinese Journal of Lasers, 44, 0802006(2017).

[19] Luo J, Feng G Y, Han J H et al. Thermodynamics of laser plasma removal of micro and nano-particles[J]. Acta Physica Sinica, 69, 084201(2020).

[20] Chen Q, Zhao Z G, Zhang T et al. The first pulse auto-suppression technology for laser marker[J]. Piezoelectrics & Acoustooptics, 34, 527-528, 536(2012).

[21] Yuan B J, Xue D J, Lu X H. The design and implementation of a low-noise diode laser drive power[J]. Optical Instruments, 27, 69-71(2005).