[1] [1] A Erdmann, R Farkas, T Fühner, et al.. Mask and source optimization for lithographic imaging systems [C]. SPIE, 2003, 5182: 88-102.

[2] [2] F M Schellenberg. Resolution enhancement technology: the past, the present, and extensions for the future, optical microlithography [C]. SPIE, 2004, 5377: 1-20.

[3] [3] S Nagahara, K Yoshimochi, H Yamazaki, et al.. SMO for 28-nm logic device and beyond: impact of source and mask complexity on lithography performance [C]. SPIE, 2010, 7640: 76401H.

[4] [4] M Rothschild. A roadmap for optical lithography [J]. Opt Photon News, 2010, 21(6): 26-31.

[5] [5] K Yoshimochi, S Nagahara, K Takeda, et al.. Challenges for low-k1 lithography in logic devices by source mask co-optimization [C]. SPIE, 2010, 7640: 76401K.

[6] [6] T Matsuda, S Irie, T Shimizu, et al.. Mask enhancer technology with source mask optimization (SMO) for 2Xnm-node logic layout gate fabrication [C]. SPIE, 2011, 7973: 797316.

[7] [7] J C Yu, P C Yu. Gradient-based fast source mask optimization (SMO) [C]. SPIE, 2011, 7973: 797320.

[8] [8] A E Rosenbluth, S Bukofsky, C Fonseca, et al.. Optimum mask and source patterns to print a given shape [J]. J Micro/Nanolith MEMS MOEMS, 2002, 1(1): 13-30.

[9] [9] X Ma, G R Arce. Pixel-based simultaneous source and mask optimization for resolution enhancement in optical lithography [J]. Opt Express, 2009, 17(7): 5783-5793.

[10] [10] S K Li, X Z Wang, Y Bu. Robust pixel-based source and mask optimization for inverse lithography [J]. Optics & Laser Technology, 2013, 45: 285-293.

[11] [11] A Erdmann, T Fuhner, T Schnattinger, et al.. Towards automatic mask and source optimization for optical lithography [C]. SPIE, 2004, 5377: 646-657.

[12] [12] C X Yang, X Z Wang, S K Li, et al.. Source mask optimization using real-coded genetic algorithms [C]. SPIE, 2013, 8683: 86831T.

[13] [13] V Tolani, P Hu, D Peng, et al.. Source mask co-optimization (SMO) using level set methods [C]. SPIE, 2009, 7488: 74880Y.

[14] [14] S J Chang, C Chen. Abbe-PCA-SMO: microlithography source and mask optimization based on Abbe-PCA [C]. SPIE, 2009, 7520: 75202G.

[15] [15] J H Chang, C C Chen. Abbe-PCA-SMO: microlithography source and mask optimization based on Abbe-PCA [C]. SPIE, 2009, 7640: 764026.

[16] [16] Y Peng, J Zhang, Y Wang, et al.. Gradient-based source and mask optimization in optical lithography [J]. IEEE Trans Image Process, 2011, 20(10): 2856-2864.

[17] [17] N N Jia, E Y Lam. Pixelated source mask optimization for process robustness in optical lithography [J]. Opt Express, 2011, 19(20): 19384-19398.

[18] [18] J C Yu, P C Yu, H Yung Chao. Source optimization incorporating margin image average with conjugate gradient method [C]. SPIE, 2012, 8326: 83261W.

[19] [19] A K Wong. Optical Imaging in Projection Microlithography [M]. Bellingha: SPIE Press,2005.

[20] [20] C Mack. Fundamental Principles of Optical Lithography: the Science of Micro-Fabrication [M]. Chichester: Wiley-Blackwell, 2007.

[21] [21] M A Vorontsov, V P Sivokon. Stochastic parallel-gradient-descent technique for high-resoulution wave-front phase-distortion correction [J]. Opt Soc Am A, 1998, 15: 2745-2758.

[22] [22] Yang Huizhen, Li Xinyang, Jiang Wenhan. Simulation and analysis of stochastic parallel gradient descent control algorithm for adaptive optics system [J]. Acta Optica Sinica, 2007, 27(8): 1355-1360.

[23] [23] J C Spall. Multivariate stochastic approximation using a simultaneous perturbation gradient approximation [J]. IEEE Trans Automat Contr, 1992, 37(3): 332-341.