[1] Cerrone C, Chiti F, Sacchi M et al. Application of laser welding to stainless steel light rail vehicle[J]. Welding in the World, 52, 27-32(2008).

[2] Guo X Z, Liu W, Wang C K et al. Numerical analysis of elastic-plastic deformation evolution and fracture behavior in tensile process of laser lap welded 301L joints[J]. Chinese Journal of Lasers, 45, 1202003(2018).

[3] Bhadra R, Pankaj P, Biswas P et al. Thermo-mechanical analysis of CO2 laser butt welding on AISI 304 steel thin plates[J]. International Journal of Steel Structures, 19, 14-27(2019).

[4] Barsoum Z, Barsoum I. Residual stress effects on fatigue life of welded structures using LEFM[J]. Engineering Failure Analysis, 16, 449-467(2009).

[5] Zambon A, Ferro P, Bonollo F. Microstructural, compositional and residual stress evaluation of CO2 laser welded superaustenitic AISI 904L stainless steel[J]. Materials Science and Engineering: A, 424, 117-127(2006).

[6] Li S H, Jiang Y L, Chen H N et al. Comparison of residual stress determination methods for laser lap welding of stainless steel sheet[J]. Welding & Joining, 17-20(2017).

[7] Mao Z T, Pu X W, Wang W D et al. Comparison of welding deformation and residual stress in Q345 steel thin-plate joints induced by laser beam welding and gas metal arc welding[J]. Chinese Journal of Lasers, 43, 0602010(2016).

[8] Wu Q, Xu L Y, Yang Y Q et al. Study on laser welding residual stress of high strength steel[J]. Chinese Journal of Lasers, 42, 0603007(2015).

[9] Kouadri-Henni A, Seang C, Malard B et al. Residual stresses induced by laser welding process in the case of a dual-phase steel DP600: simulation and experimental approaches[J]. Materials & Design, 123, 89-102(2017).

[10] Liang H, Jiang Y L, Chen H N et al. Effect of residual stress on mechanical properties of laser welded thin plate lap joint[J]. Transactions of the China Welding Institution, 38, 112-116(2017).

[11] Zhu L H, Yu Y F, Guo T et al. Study on fatigue properties for non-penetration laser lap welding of stainless steel[J]. Science and Technology Innovation Herald, 11, 1-2, 4(2014).

[12] Zain-Ul-abdein M, Nelias D, Jullien J F et al. Prediction of laser beam welding-induced distortions and residual stresses by numerical simulation for aeronautic application[J]. Journal of Materials Processing Technology, 209, 2907-2917(2009).

[13] Spina R, Tricarico L, Basile G et al. Thermo-mechanical modeling of laser welding of AA5083 sheets[J]. Journal of Materials Processing Technology, 191, 215-219(2007).

[14] Han X H, Chen J, Kan Y et al. Heat source model for non-penetration laser lap welding of stainless steel sheets[J]. Chinese Journal of Lasers, 44, 0502002(2017).

[15] Sun J M, Liu X Z, Tong Y G et al. A comparative study on welding temperature fields, residual stress distributions and deformations induced by laser beam welding and CO2 gas arc welding[J]. Materials & Design, 63, 519-530(2014).

[16] Deng D A, Kiyoshima S. Numerical simulation of residual stresses induced by laser beam welding in a SUS316 stainless steel pipe with considering initial residual stress influences[J]. Nuclear Engineering and Design, 240, 688-696(2010).

[17] Xia J, Jin H. Numerical study of welding simulation and residual stress on butt welding of dissimilar thickness of austenitic stainless steel[J]. The International Journal of Advanced Manufacturing Technology, 91, 227-235(2017).

[18] Cai J P, Jiang X H, Zhang Y J et al. Influence of groove type on residual stress and distortion in SUS304 austenitic stainless steel butt weld[J]. Transactions of the China Welding Institution, 37, 63-66(2016).

[19] Huang C X, Yang G, Wang C et al. Mechanical behaviors of ultrafine-grained 301 austenitic stainless steel produced by equal-channel angular pressing[J]. Metallurgical and Materials Transactions A, 42, 2061-2071(2011).

[20] Byun T, Hashimoto N, Farrell K. Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels[J]. Acta Materialia, 52, 3889-3899(2004).

[21] Huang B S, Chen Q, Yang J et al. Numerical simulation of welding residual stress and distortion in Q345/316L dissimilar steel[J]. Transactions of the China Welding Institution, 40, 138-144(2019).

[22] Akbari D, Sattari-Far I. Effect of the welding heat input on residual stresses in butt-welds of dissimilar pipe joints[J]. International Journal of Pressure Vessels and Piping, 86, 769-776(2009).

[23] Lin J, Ma N, Lei Y et al. Measurement of residual stress in arc welded lap joints by cosα X-ray diffraction method[J]. Journal of Materials Processing Technology, 243, 387-394(2017).