[1] Siddiqui A A, Dubey A K. Recent trends in laser cladding and surface alloying[J]. Optics & Laser Technology, 134, 106619(2021).

[2] Zhu L D, Xue P S, Lan Q et al. Recent research and development status of laser cladding: a review[J]. Optics & Laser Technology, 138, 106915(2021).

[3] Jin X X, Wurikaixi A. Research progress on the numerical model of laser cladding technology[J]. Machinery Design & Manufacture, 301-304(2023).

[4] Song B Q, Men X H, Zhang G C et al. Review of dynamic evolution of laser cladding molten pool and defect process regulation[J]. Surface Technology, 53, 71-91(2024).

[5] Li C, Yu Z B, Gao J X et al. Numerical simulation and experiment of thermo-elastic-plastic-flow multi-field coupling in laser cladding process[J]. China Surface Engineering, 32, 124-134(2019).

[6] Khamidullin B A, Tsivilskiy I V, Gorunov A I et al. Modeling of the effect of powder parameters on laser cladding using coaxial nozzle[J]. Surface and Coatings Technology, 364, 430-443(2019).

[7] Sun Z, Guo W, Li L. Numerical modelling of heat transfer, mass transport and microstructure formation in a high deposition rate laser directed energy deposition process[J]. Additive Manufacturing, 33, 101175(2020).

[8] Kong F R, Kovacevic R. Modeling of heat transfer and fluid flow in the laser multilayered cladding process[J]. Metallurgical and Materials Transactions B, 41, 1310-1320(2010).

[9] Wei S P, Wang G, Shin Y C et al. Comprehensive modeling of transport phenomena in laser hot-wire deposition process[J]. International Journal of Heat and Mass Transfer, 125, 1356-1368(2018).

[10] Gan Z T, Yu G, He X L et al. Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel[J]. International Journal of Heat and Mass Transfer, 104, 28-38(2017).

[11] Yu H J, Dai D H, Shi X Y et al. Thermal behaviors of initial and steady state deposition processes of Ti/Al heterogeneous materials fabricated by laser additive manufacturing on curved surface[J]. Chinese Journal of Lasers, 50, 0802302(2023).

[12] Hao J B, Liu H R, Yang S et al. Simulation and experimental study of effects of in situ remelting on morphology modification and microstructure evolution of laser cladding layer on inclined substrates[J]. Chinese Journal of Lasers, 51, 1602203(2024).

[13] Choi J, Han L, Hua Y. Modeling and experiments of laser cladding with droplet injection[J]. Journal of Heat Transfer, 127, 978-986(2005).

[14] Song B X, Yu T B, Jiang X Y et al. Numerical model of transient convection pattern and forming mechanism of molten pool in laser cladding[J]. Numerical Heat Transfer Part A-Applications, 75, 855-873(2019).

[15] Li B Y, Shu L S, Chen X D et al. Simulation and experimental verification of thermal cycling characteristics of IN718 superalloy multi-pass cladding[J]. Transactions of Materials and Heat Treatment, 45, 207-215, 224(2024).

[16] Huang H L, Wu M J, Luo S M et al. Optimization of process parameters in laser cladding multi channel forming using MVBM-NSGA-II method[J]. Materials and Manufacturing Processes, 39, 2226-2235(2024).

[17] Wang Q T, Zeng X B, Chen C R et al. An integrated method for multi-objective optimization of multi-pass Fe50/TiC laser cladding on AISI 1045 steel based on grey relational analysis and principal component analysis[J]. Coatings, 10, 151(2020).

[18] Liu L L, Li S C, Dou W T et al. Process optimization and performance analysis for laser-cladding Ni60 alloy coating on surface of 316L stainless steel[J]. Chinese Journal of Lasers, 51, 1602207(2024).

[19] An X L, Wang Y L, Jiang F L et al. Influence of lap ratio on temperature field and residual stress distribution of 42CrMo laser cladding[J]. Chinese Journal of Lasers, 48, 1002110(2021).

[20] Lian G F, Cao Q, Zheng Y et al. Multi-channel lap forming and powder utilization ratio of laser cladding[J]. Transactions of Materials and Heat Treatment, 44, 127-139(2023).

[21] Wang X Y, Wang G, Luo S et al. Multi-phase flow modelling of laser cladding process with T15 high speed steel particles[J]. China Surface Engineering, 32, 117-123(2019).

[22] Wei S P, Wang G, Nie Z G et al. Microstructure evolution of martensitic stainless steel in laser hot wire cladding with multiple heating passes[M]. TMS 2016: 145th annual meeting & exhibition: supplemental proceedings, 191-198(2016).

[23] Chai R X, Tian Y, Zhou X J et al. Numerical simulation and experimental study of high-speed laser cladding under circular scanning path[J]. Chinese Journal of Lasers, 50, 0802205(2023).