Researching | Two-Step Tool Setting Method with Progressive Accuracy Levels in Ultra-Precision Turning

Acta Optica Sinica, Volume. 44, Issue 13, 1322003(2024)

Two-Step Tool Setting Method with Progressive Accuracy Levels in Ultra-Precision Turning

Shunfa Chen, Jianing Wang, Chang Liu, Zhipeng Xue^*, Mingzhi Li, Haowei Xiao, and Lei Zhang

Author Affiliations

Chang Guang Satellite Technology Co., Ltd., Changchun 130000, Jilin , China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (16)

References (20)

Paper Information

References(20)

[1] Yuan Z J, Wang X K[M]. Precision and ultraprecision machining technology(2016).

[2] Huang Y T, Fan B, Wan Y J et al. Improving the performance of single point diamond turning surface with ion beam figuring[J]. Optik, 172, 540-544(2018).

[3] Liu E J, Xu J, Chen X et al. Advancements and developments of laser polishing technology[J]. Chinese Journal of Lasers, 50, 162202(2023).

[4] Dai W, Zheng Z Z, Li J J et al. Research progress of laser polishing on the metal surface[J]. Laser & Optoelectronics Progress, 52, 110001(2015).

[5] Shen Z X, Yu J, Song Z Z et al. Customized design and efficient fabrication of two freeform aluminum mirrors by single point diamond turning technique[J]. Applied Optics, 58, 2269-2276(2019).

[6] Wang Z Y, Chen Z Z, Zhu L M et al. Single point diamond turning and compensation for micro-lens array[J]. Optics and Precision Engineering, 30, 813-820(2022).

[7] Arizmendi M, Fernández J, Gil A et al. Effect of tool setting error on the topography of surfaces machined by peripheral milling[J]. International Journal of Machine Tools and Manufacture, 49, 36-52(2009).

[8] Li Z Q, Sun T, Zong W J et al. Influence of alignment errors on measuring nose roundness of diamond cutting tools with a novel method[J]. Materials Science Forum, 697/698, 828-833(2011).

[9] Zhang G Q, Dai Y Q, To S et al. Tool interference at workpiece centre in single-point diamond turning[J]. International Journal of Mechanical Sciences, 151, 1-12(2019).

[10] Zhao M, He N, Li L et al. Method of precise auto tool setting for micro milling[J]. Transactions of Tianjin University, 17, 284-287(2011).

[11] Dai Y Q, Jiang J K, Zhang G Q et al. Forced-based tool deviation induced form error identification in single-point diamond turning of optical spherical surfaces[J]. Precision Engineering, 72, 83-94(2021).

[12] Zhang G Q, Dai Y Q, Lai Z H. A novel force-based two-dimensional tool centre error identification method in single-point diamond turning[J]. Precision Engineering, 70, 92-109(2021).

[13] Fitzgibbon A, Pilu M, Fisher R B. Direct least square fitting of ellipses[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 21, 476-480(1999).

[14] Jeon J U, Kim S W. Optical flank wear monitoring of cutting tools by image processing[J]. Wear, 127, 207-217(1988).

[15] Hou B, Zhang C P, Yang S B. Computer vision tool-setting system of numerical control machine tool[J]. Sensors, 20, 5302(2020).

[16] Zhao L J, Cheng J, Yin Z Y et al. Research on precision automatic tool setting technology for KDP crystal surface damage mitigation based on machine vision[J]. Journal of Manufacturing Processes, 64, 750-757(2021).

[17] Guo Z, Mao S M, Du X F et al. Influences of tool setting errors on gear skiving accuracy[J]. The International Journal of Advanced Manufacturing Technology, 91, 3135-3143(2017).

[18] Nakamoto K, Sugiyama K, Takeuchi Y. Tool setting of error compensation for multi-axis control ultra-precision machining[EB/OL]. https:∥www.euspen.eu/knowledge-base/ICE14-P6.01.pdf

[19] Guo P, Li Z, Xiong Z W et al. A theoretical and experimental investigation into tool setting induced form error in diamond turning of micro-lens array[J]. The International Journal of Advanced Manufacturing Technology, 124, 2515-2525(2023).

[20] Wang S M, Lin J J, Ye Z Z et al. A micro cutter auto-alignment system with on-machine positioning error measurement and compensation methods[J]. International Journal of Precision Engineering and Manufacturing, 15, 177-182(2014).

Tools

Get Citation

Copy Citation Text

Shunfa Chen, Jianing Wang, Chang Liu, Zhipeng Xue, Mingzhi Li, Haowei Xiao, Lei Zhang. Two-Step Tool Setting Method with Progressive Accuracy Levels in Ultra-Precision Turning[J]. Acta Optica Sinica, 2024, 44(13): 1322003

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Optical Design and Fabrication

Received: Jan. 12, 2024

Accepted: Mar. 15, 2024

Published Online: Jul. 4, 2024

The Author Email: Zhipeng Xue (xuezhipeng@jl1.cn)

DOI:10.3788/AOS240486

CSTR:32393.14.AOS240486

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology