Laser‐MIG Hybrid Backing Welding Process of 20 mm Thick Aluminum Alloy and Structure Properties

[9] Huang Y H, Fan X A, Zhang Y X et al. Online detection of root hump in laser-MIG hybrid welding based on invariable moment characteristics of molten pool image[J]. Chinese Journal of Lasers, 50, 1202108(2023).

[10] Wang Y, Shu L S, Geng S N et al. Status and development trend of laser welding technology for automotive body[J]. Chinese Journal of Lasers, 49, 1202004(2022).

[11] Fan C, Yang S L, Zhu M Q et al. Microstructure and fatigue properties of 6061 aluminum alloy laser-MIG hybrid welding joint[J]. Advances in Materials Science and Engineering, 2021, 1933942(2021).

[12] Zhang Y H, Chen H, Yang C et al. Influence of laser power on droplet transfer behavior and spatter in laser-MIG hybrid welding of aluminum alloy[J]. Laser & Optoelectronics Progress, 59, 1714005(2022).

[13] Casalino G, Mortello M, Leo P et al. Study on arc and laser powers in the hybrid welding of AA5754 Al-alloy[J]. Materials & Design, 61, 191-198(2014).

[14] Zhang L Z, Wang X N, Chen X M et al. Effect of laser power on microstructure and properties of high strength Al-Mg-Si-Cu alloy laser-CMT hybrid welded joints[J]. Chinese Journal of Lasers, 50, 0402013(2023).

[15] Liu T, Zhao Y Q, Zhou X D et al. Effect of energy ratio coefficient on pore during aluminum alloy laser-MIG hybrid welding[J]. Chinese Journal of Lasers, 47, 1102004(2020).

[16] Han X H, Zhang Z Y, Ma G L et al. Effects of heat source angle on weld formation and porosity defects of laser-MIG hybrid welding of 6A01 aluminum alloy[J]. Chinese Journal of Lasers, 49, 0202020(2022).

[17] Zhao Y Q, Zhou X D, Liu T et al. Investigate on the porosity morphology and formation mechanism in laser-MIG hybrid welded joint for 5A06 aluminum alloy with Y-shaped groove[J]. Journal of Manufacturing Processes, 57, 847-856(2020).

[18] Wang Q Y, Chen H, Zhu Z T et al. A characterization of microstructure and mechanical properties of A6N01S-T5 aluminum alloy hybrid fiber laser-MIG welded joint[J]. The International Journal of Advanced Manufacturing Technology, 86, 1375-1384(2016).

[19] Allen C M, Verhaeghe G, Hilton P A et al. Laser and hybrid laser-MIG welding of 6.35 and 12.7 mm thick aluminium aerospace alloy[J]. Materials Science Forum, 520, 1139-1144(2006).

[20] Wang K, Jiao X D, Zhu J L et al. Research on the effect of weld groove on the quality and stability of laser-MAG hybrid welding in horizontal position[J]. Welding in the World, 65, 1701-1709(2021).

[21] Çetkin E, Çelik Y H, Temiz Ş. Effect of welding parameters on microstructure and mechanical properties of AA7075/AA5182 alloys joined by TIG and MIG welding methods[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 34(2019).

[22] Huang A G, Zhang J J, Gao C et al. Effects of groove constraint space on plasma characteristics during Laser-MIG hybrid welding of Titanium alloy[J]. Journal of Manufacturing Processes, 48, 137-144(2019).

[23] Liu F Y, Yang B, Sun H F et al. Mechanism investigation for the influence of laser power on droplet transfer behaviors in laser-MIG hybrid welding[J]. Optics & Laser Technology, 157, 108750(2023).

[24] Huang S, Xu L D, Lou M et al. Keyhole-induced pore formation mechanism in laser-MIG hybrid welding of aluminum alloy based on experiment and multiphase numerical model[J]. Journal of Materials Processing Technology, 314, 117903(2023).

[25] Zhao Y Q, Zhan X H, Zhou X D et al. Effect of heat input on macro morphology and porosity of laser-MIG hybrid welded joint for 5A06 aluminum alloy[J]. The International Journal of Advanced Manufacturing Technology, 115, 4035-4045(2021).

[26] Xin Z B, Yang Z B, Zhao H et al. Comparative study on welding characteristics of laser-CMT and plasma-CMT hybrid welded AA6082-T6 aluminum alloy butt joints[J]. Materials, 12, 3300(2019).

[27] Wu N Q, Xia C, Li M et al. Interfacial structure and micro and nano-mechanical behavior of laser-welded 6061 aluminum alloy blank[J]. Journal of Engineering Materials and Technology, 126, 8-13(2004).

[28] Cieslak M J, Fuerschbach P W. On the weldability, composition, and hardness of pulsed and continuous Nd: YAG laser welds in aluminum alloys 6061, 5456, and 5086[J]. Metallurgical Transactions B, 19, 319-329(1988).

[29] Hirose A, Kurosawa N, Kobayashi K F et al. Quantitative evaluation of softened regions in weld heat-affected zones of 6061-T6 aluminum alloy: characterizing of the laser beam welding process[J]. Metallurgical and Materials Transactions A, 30, 2115-2120(1999).

[30] Zhang X G, Li L Q, Chen Y B et al. Effects of pulse parameters on weld microstructure and mechanical properties of extra pulse current aided laser welded 2219 aluminum alloy joints[J]. Materials, 10, 1091(2017).

[31] Li F Q, Feng S, Li M W et al. Softening phenomenon of heat-affected zone in laser welding of 6082 Al alloys with filler wire[J]. Chinese Journal of Lasers, 45, 1102007(2018).

Tools

Get Citation

Copy Citation Text

Zhibin Yang, Yanqi Xie, Likang Sheng. Laser‐MIG Hybrid Backing Welding Process of 20 mm Thick Aluminum Alloy and Structure Properties[J]. Chinese Journal of Lasers, 2024, 51(20): 2002101

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Laser Forming Manufacturing

Received: Nov. 17, 2023

Accepted: Dec. 13, 2023

Published Online: Oct. 10, 2024

The Author Email: Yang Zhibin (yangzhibin@djtu.edu.cn)

DOI:10.3788/CJL231416

CSTR:32183.14.CJL231416

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology