[1] Gibson I, Rosen D, Stucker B. Direct digital manufacturing[M]. //Additive manufacturing technologies, 375-397(2015).

[2] Horn T J, Harrysson O L. Overview of current additive manufacturing technologies and selected applications[J]. Science Progress, 95, 255-282(2012).

[3] Rodrigues T A, Duarte V, Miranda R M et al. Current status and perspectives on wire and arc additive manufacturing (WAAM)[J]. Materials, 12, E1121(2019).

[4] Griffith M L, Keicher D M, Atwood C L. Free form fabrication of metallic components using laser engineered net shaping[C]. //1996 International Solid Freeform Fabrication Symposium. [S.l.: s.n.](1996).

[5] Sciammarella F, Salehi Najafabadi B. Processing parameter DOE for 316L using directed energy deposition[J]. Journal of Manufacturing and Materials Processing, 2, 61(2018).

[6] Yadollahi A, Shamsaei N, Thompson S M et al. Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel[J]. Materials Science and Engineering A, 644, 171-183(2015).

[7] Saboori A, Piscopo G, Lai M et al. An investigation on the effect of deposition pattern on the microstructure, mechanical properties and residual stress of 316L produced by directed energy deposition[J]. Materials Science and Engineering A, 780, 139179(2020).

[8] Chen X H, Li J, Cheng X et al. Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing[J]. Materials Science and Engineering A, 703, 567-577(2017).

[9] Wang K B, Liu Y X, Lü Y H et al. Influence of processing parameters on microstructure and mechanical property of pulsed plasma arc additive manufactured IN738LC superalloy[J]. Materials Reports, 35, 2086-2091(2021).

[10] Guo P, Zou B, Huang C Z et al. Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser deposition[J]. Journal of Materials Processing Technology, 240, 12-22(2017).

[11] Wang F X, He J P, Xiang F et al. Study on multi-parameter control system of micro-plasma arc welding[C]. //2010 International Conference on Intelligent System Design and Engineering Application, October 13-14, 2010, Changsha, China., 463-466(2010).

[12] Wang X B, Zhang W Y. Theoretical evaluation of powders transportation process in plasma transferred-arc space[J]. Transactions of the China Welding Institution, 21, 33-37, 99(2000).

[13] Yang Y Q, Weng C W, Zhou Q et al. Research on the process and prediction model for size of 316L stainless steel fabricated by plasma arc additive manufacturing[J]. Journal of Mechanical Engineering, 55, 31-38(2019).

[14] Yang S, Huang W D, Liu W J et al. Research on laser rapid directional solidification with ultra-high temperature gradient[J]. Chinese Journal of Lasers, 29, 475-479(2002).

[15] Zheng B, Haley J C, Yang N et al. On the evolution of microstructure and defect control in 316L SS components fabricated via directed energy deposition[J]. Materials Science and Engineering A, 764, 138243(2019).