[1] [1] WEHNER G. Influence of the angle of incidence on sputtering yields[J].J. Appl. Phys., 1959, 30(10): 1762-1765.

[2] [2] DUCOMMUN J P, CANTAGREL M. Evolution of well-defined sureface contour submitted to ion bombardment[J]. J. Mater. Sci, 1975, 10(7): 52-62.

[3] [3] JOHNSON L F. Evolution of grating profiles under ion-beam erosion[J]. Appl.Opt., 1979, 18(15): 2259-2574.

[4] [4] AOYAGI Y, NAMBA S. Blazed ion-etched holographic gratings[J]. Opt. Acta., 1976, 23(9): 701-707.

[5] [5] ZHUANG X, LIU G Q , LI Y G , Holographic Gratings[J], Opt. Precision Eng., 1981, 12(5): 226-230. (in Chinese)

[6] [6] HUTLEY M C. Diffraction Gratings [M]. Academic, New York, 1982.

[7] [7] TAN X, LIU Y, LIU ZH K. Performance of a soft X-ray splitter grating parallelism measuring system by diffraction method[J]. Journal of Functional Materials and Devices, 2009, 24(15): 61-65.

[8] [8] LIU Y, TAN X, LIU ZH K. Soft X-ray holographic grating beam splitter including a double frequency grating for interferometer pre-alignment[J]. Optics Express, 2008, 18(16): 14761-14770.

[9] [9] TAN X, LIU Y, XU X D, et al..13.9 nm Laminar grating as beam splitter[J]. Opt. Precision Eng., 2009, 17(1): 33-37.(in Chinese)

[10] [10] LIN H, LI L F. Fabrication of extreme-ultraviolet blazed gratings by use of direct argon–oxygen ion-beam etching through a rectangular photoresist mask[J]. Appl. Opt., 2008, 33(47): 6212-6218.

[11] [11] OLDHAM W G, NEUREUTHER A R, SUNG C, et al.. A general simulator for VISI lithography and etching process: Part ii- Application to deposition and etching[J]．IEEE Trans Electron Devices, 1980, 45(27): 1455-1465.

[12] [12] MCVITTIE J P J, REY C, CHENG L Y, et al.. LPCVD profile simulation using a Re-emission model[J]. IEDM 90, 1990, 245(19): 917-920.

[13] [13] ZHOU R C, ZHANG H X, HAO Y Y, et al.. Simulation of profile evolution in etching-polymerization alternation in DRIE of silicon with SF6／C4F8[J]. MEMS 03, 2003, 27(16): 161-164.

[14] [14] TAN X, LI W H, Bayanheshig, et al.. Fabrication of the ultraviolet holographic blazed grating [J]. Opt. Precision Eng., 2010, 18(7): 1536-1544.(in Chinese)

[15] [15] TAN X. Fabrication of high-efficiency ultraviolet blazed gratings by use of direct Ar2-CHF3 ion-beam etching through a rectangular photoresist mask[J]. SPIE, 2011, 8191: 1117-1129.