[1] Joshi V A[M]. Titanium alloys: an atlas of structures and fracture fearures(2006).

[2] Zhao H Z, Hou H M, Jia W J et al. Research and application on laser shock peening of titanium alloy[J]. Titanium Industry Progress, 33, 7-11(2016).

[3] Zhou W F, Ren X, Liu F F et al. Nanocrystallization in the duplex Ti-6Al-4V alloy processed by multiple laser shock peening[J]. Metals, 6, 297(2016).

[4] Liu Y P, Shi Z J, Zhao Y Z et al. Cut-off value of detail fatigue rated strength of TC4 titanium alloy with compound strengthening treatment by laser shock peening and shot peening[J]. Chinese Journal of Lasers, 47, 0502006(2020).

[5] Okido S, Yoshimura T, Enomoto K et al. Preventive effect of shot peening on stress corrosion cracking[J]. Journal of the Society of Materials Science, 51, 193-198(2002).

[6] Lü S L, Cu Y, Zhang W et al. Influence of shot peening on failure of an aluminum alloy exposed to aggressive aqueous environments[J]. Journal of Materials Engineering and Performance, 22, 1735-1743(2013).

[7] Gebert A, Concustell A, Greer A L et al. Effect of shot-peening on the corrosion resistance of a Zr-based bulk metallic glass[J]. Scripta Materialia, 62, 635-638(2010).

[8] Stolárik G, Nag A, Petrů J et al. Ultrasonic pulsating water jet peening: influence of pressure and pattern strategy[J]. Materials (Basel), 14, 6019(2021).

[9] Meng C, Zhao Y C, Zhang X Y et al. Research and application of ultrasonic rolling surface strengthening technology[J]. Surface Technology, 51, 179-202(2022).

[10] Cai J, Cherutich K C, Li W et al. Surface roughness numerical and test evaluation of FGH97 powder superalloy by ultrasonic shot peening[J]. Surface Technology, 50, 250-257(2021).

[11] Sembiring J P B A, Amanov A, Pyun Y S. Artificial neural network-based prediction model of residual stress and hardness of nickel-based alloys for UNSM parameters optimization[J]. Materials Today Communications, 25, 101391(2020).

[12] Wu J J, Zhao J B, Qiao H C et al. Evaluating methods for quality of laser shock processing[J]. Optik, 200, 162940(2020).

[13] Wu J J, Lin X Z, Qiao H C et al. Microstructural evolution and surface mechanical properties of the titanium alloy Ti-13Nb-13Zr subjected to laser shock processing[J]. Materials, 16, 238(2022).

[14] Che Z G, Yang J, Gong S L et al. Self-nanocrystallization of Ti-6Al-4V alloy surface induced by laser shock processing[J]. Rare Metal Materials and Engineering, 43, 1056-1060(2014).

[15] Zhang L, Luo K Y, Lu J Z et al. Effects of laser shock processing with different shocked paths on mechanical properties of laser welded ANSI 304 stainless steel joint[J]. Materials Science and Engineering: A, 528, 4652-4657(2011).

[16] Yang X F, Zhang H J, Cui H T et al. Effect of laser shock peening on fretting fatigue life of TC11 titanium alloy[J]. Materials, 13, 4711(2020).

[17] Chen X P, Zhang L F, Xiong Y et al. Effect of laser shock peening on microstructure and properties of laser additive manufactured TC4 titanium alloy[J]. Chinese Journal of Lasers, 49, 1602017(2022).

[18] Liao X L, Su B Y, Xu S et al. Flow law of plastic deformation of TC4 titanium alloy by laser shock peening[J]. Chinese Journal of Lasers, 50, 1602206(2023).

[19] Li J K, Wang S R, Wang G Q et al. Effect of laser shock peening on surface modification and tribological properties of Ti6Al4V titanium alloy bone plates[J]. Chinese Journal of Lasers, 49, 0202010(2022).

[20] Zhou L C, He W F, Luo S H et al. Laser shock peening induced surface nanocrystallization and martensite transformation in austenitic stainless steel[J]. Journal of Alloys and Compounds, 655, 66-70(2016).

[21] Liu L, Wang J J, Zhou J Z. Characterization and analysis on micro-hardness and microstructure evolution of brass subjected to laser shock peening[J]. Optics & Laser Technology, 115, 325-330(2019).

[22] Zhang C Y, Dong Y L, Ye C. Recent developments and novel applications of laser shock peening: a review[J]. Advanced Engineering Materials, 23, 2001216(2021).

[23] Hu Y X, Yao Z Q. Overlapping rate effect on laser shock processing of 1045 steel by small spots with Nd∶YAG pulsed laser[J]. Surface and Coatings Technology, 202, 1517-1525(2008).

[24] Luo K Y, Lin T, Dai F Z et al. Effects of overlapping rate on the uniformities of surface profile of LY2 Al alloy during massive laser shock peening impacts[J]. Surface and Coatings Technology, 266, 49-56(2015).

[25] Keller S, Chupakhin S, Staron P et al. Experimental and numerical investigation of residual stresses in laser shock peened AA2198[J]. Journal of Materials Processing Technology, 255, 294-307(2018).

[26] Nie X F, He W F, Zang S L et al. Effect study and application to improve high cycle fatigue resistance of TC11 titanium alloy by laser shock peening with multiple impacts[J]. Surface and Coatings Technology, 253, 68-75(2014).

[27] Li X, He W F, Luo S H et al. Simulation and experimental study on residual stress distribution in titanium alloy treated by laser shock peening with flat-top and Gaussian laser beams[J]. Materials, 12, 1343(2019).

[28] Jiang Y F, Ji B, Gan X D et al. Study on the effect of laser peening with different power densities on fatigue life of fastener hole[J]. Optics & Laser Technology, 106, 311-320(2018).

[29] Correa C, de Lara L R, Díaz M et al. Effect of advancing direction on fatigue life of 316L stainless steel specimens treated by double-sided laser shock peening[J]. International Journal of Fatigue, 79, 1-9(2015).

[30] Wang B H, Cheng L, Ding J L et al. Numerical simulation on laser shock peening of TC4 titanium alloy[J]. Journal of Aerospace Power, 36, 959-968(2021).

[31] Adu-Gyamfi S, Ren X D, Larson E A et al. The effects of laser shock peening scanning patterns on residual stress distribution and fatigue life of AA2024 aluminium alloy[J]. Optics & Laser Technology, 108, 177-185(2018).

[32] Pan X L, Li X, Zhou L C et al. Effect of residual stress on S-N curves and fracture morphology of Ti6Al4V titanium alloy after laser shock peening without protective coating[J]. Materials, 12, 3799(2019).

[33] Zhou J Z, Meng X K, Huang S et al. Effects of warm laser peening at elevated temperature on the low-cycle fatigue behavior of Ti6Al4V alloy[J]. Materials Science and Engineering: A, 643, 86-95(2015).

[34] Zhang X C, Zhang Y K, Lu J Z et al. Improvement of fatigue life of Ti–6Al–4V alloy by laser shock peening[J]. Materials Science and Engineering: A, 527, 3411-3415(2010).

[35] Razavi N, Berto F. Directed energy deposition versus wrought Ti‐6Al‐4V: a comparison of microstructure, fatigue behavior, and notch sensitivity[J]. Advanced Engineering Materials, 21, 1900220(2019).

[36] Jiang Q H, Li S, Zhou C et al. Effects of laser shock peening on the ultra-high cycle fatigue performance of additively manufactured Ti6Al4V alloy[J]. Optics & Laser Technology, 144, 107391(2021).

[37] Luo S H, Nie X F, Zhou L C et al. High cycle fatigue performance in laser shock peened TC4 titanium alloys subjected to foreign object damage[J]. Journal of Materials Engineering and Performance, 27, 1466-1474(2018).

[38] Li P Y, Huang S K, Xu H F et al. Numerical simulation and experiments of titanium alloy engine blades based on laser shock processing[J]. Aerospace Science and Technology, 40, 164-170(2015).

[39] Ouyang P X, Luo X K, Dong Z C et al. Numerical prediction of the effect of laser shock peening on residual stress and fatigue life of Ti-6Al-4V titanium alloy[J]. Materials, 15, 5503(2022).

[40] Ocaña J L, Morales M, Molpeceres C et al. Numerical simulation of surface deformation and residual stresses fields in laser shock processing experiments[J]. Applied Surface Science, 238, 242-248(2004).

[41] Chai H. Fracture mechanics analysis of thin coatings under plane-strain indentation[J]. International Journal of Solids and Structures, 40, 591-610(2003).

[42] Boyer R R. An overview on the use of titanium in the aerospace industry[J]. Materials Science and Engineering: A, 213, 103-114(1996).

[43] Wood R A, Favor R J[M]. Titanium alloys handbook(1983).

[45] Dai F Z, Zhang Y K, Lu J Z et al. A method to decrease surface roughness in laser shock processing[J]. Surface and Coatings Technology, 261, 35-40(2015).

[46] Dai F Z, Zhou J Z, Lu J Z et al. A technique to decrease surface roughness in overlapping laser shock peening[J]. Applied Surface Science, 370, 501-507(2016).

[47] Johnson G R, Cook W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J]. Engineering Fracture Mechanics, 21, 31-48(1985).

[48] Fabbro R, Fournier J, Ballard P et al. Physical study of laser-produced plasma in confined geometry[J]. Journal of Applied Physics, 68, 775-784(1990).

[49] Zhou W T. Investigation of thermechanical fatigue properties of TC4 titanium alloy subjected to laser shock peening[D](2022).

[50] Wu J J, Zhou Z H, Lin X Z et al. Improving the wear and corrosion resistance of aeronautical component material by laser shock processing: a review[J]. Materials, 16, 4124(2023).

[51] Cao Y F, Shin Y C, Wu B X. Parametric study on single shot and overlapping laser shock peening on various metals via modeling and experiments[J]. Journal of Manufacturing Science and Engineering, 132, 061010(2010).

[52] Knapp R T, Daily J W, Hammitt F G et al[M]. Cavitation and multiphase flow phenomena(1981).

[53] Wang Z Y, Long N D, Zhu J H. Review on material resistant to cavitation erosion and its application[J]. Development and Application of Materials, 16, 34-38(2001).

[54] Ma S H, Fei B Q, Zhou S et al. Influence of pre-corrosion damage and saline environment on detail fatigue property of aluminum alloy[J]. Materials for Mechanical Engineering, 41, 63-67, 73(2017).

[55] Guo H Q. An experimental study on DFRcutoff values of 2024-T3 aluminum alloy clad sheets[J]. Journal of Materials Engineering, 23, 9-11(1995).

[56] Yang F P, Qiu Y P, Lin Z Y. Study on DFR value of docking area of the joint panel in an aircraft[C], 76-78(2008).