Laser & Optoelectronics Progress, Volume. 62, Issue 17, 1722001(2025)

Integrated Opto-Mechanical-Thermal Analysis and Thermal Control Design for Water Depth Measurement LiDAR

Guoqing Zhou1,2、*, Angte Cai1,2, Kaiyun Bao1,2, Zhongao Wang1,2, Yi Tang2,3, Xiang Zhou1,2,4, Tongzhi Lin2, Ertao Gao2, and Yuhang Bai2
Author Affiliations
  • 1College of Mechanical and Control Engineering, Guilin University of Technology, Guilin 541006, Guangxi , China
  • 2Guangxi Key Laboratory of Spatial Information and Geomatics, Guilin University of Technology, Guilin 541006, Guangxi , China
  • 3College of Earth Sciences, Guilin University of Technology, Guilin 541006, Guangxi , China
  • 4School of Microelectronics, Tianjin University, Tianjin 300072, China
  • show less
    References(25)

    [3] Hei H G, Li X Y, Li L F et al. Design of active thermal control system for large space camera in geosynchronous orbit[J]. Chinese Journal of Lasers, 50, 2210002(2023).

    [4] Zhou G Q, Gao K, Wu J H et al. Design and implementation of primary mirror support structure of LiDAR[J]. Laser & Optoelectronics Progress, 61, 1722003(2024).

    [7] Liu Y Q, Gao T Y, Han X. Optomechanical design and analysis of large aperture thermal insensitive star sensor[J]. Infrared Technology, 46, 31-35(2024).

    [9] Li L, Xie C B, Xing K M et al. Optical-mechanical system design, installation and performance test of lidar with small-field and high-repetition frequency[J]. Infrared and Laser Engineering, 50, 20210046(2021).

    [10] Guan H Y, Wang L, Feng K C et al. Thermal design of Hα solar space telescope[J]. Infrared and Laser Engineering, 52, 20221395(2023).

    [12] Dong K C. Study on the thermal control technique of variable attitude dual band integrated space camera[D](2023).

    [13] Cao H, Qiang J, Zhou C L et al. Analysis of thermal control design of laser imaging radar[J]. Scientific and Technological Innovation, 6-9(2022).

    [14] Liu X Y, Zhang J X, Wu X X et al. Design and principle of the primary mirror thermal control system for large ground-based telescope[J]. Laser & Infrared, 44, 841-845(2014).

    [16] Han X, Jiang L, Li Y W et al. Opto-mechanical thermal integration analysis and optimization of KrF deep ultraviolet lithography projection lens[J]. Acta Optica Sinica, 44, 0722001(2024).

    [18] Yuan Z P. Research on technologies of thermal control for space telescope based on structural-thermal-optical integrated analysis[D](2023).

    [22] Li L, Yang J H, Zhang C L et al. Thermal effect analysis of pulsed LD end-pumped YAG/Nd:‍YAG composite crystal[J]. Laser & Optoelectronics Progress, 59, 2114001(2022).

    [24] Du J M, Xu W J, Chen H et al. Design and verification of thermal control for aerosol and carbon dioxide detection lidar[J]. Aerospace Shanghai (Chinese & English), 40, 111-116(2023).

    [25] Qiao Q, Zhao H, Xie L Q. Heat dissipation design and optimization of air cooled all solid-state laser[J]. Laser Technology, 48, 235-239(2024).

    Tools

    Get Citation

    Copy Citation Text

    Guoqing Zhou, Angte Cai, Kaiyun Bao, Zhongao Wang, Yi Tang, Xiang Zhou, Tongzhi Lin, Ertao Gao, Yuhang Bai. Integrated Opto-Mechanical-Thermal Analysis and Thermal Control Design for Water Depth Measurement LiDAR[J]. Laser & Optoelectronics Progress, 2025, 62(17): 1722001

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Optical Design and Fabrication

    Received: Jan. 9, 2025

    Accepted: Feb. 18, 2025

    Published Online: Aug. 11, 2025

    The Author Email: Guoqing Zhou (gzhou@glut.edu.cn)

    DOI:10.3788/LOP250478

    CSTR:32186.14.LOP250478

    Topics