[1] [1] Zarmai M T, Ekere N N, Oduoza C F, et al. A review of interconnection technologies for improved crystalline silicon solar cell photovoltaic module assembly[J]. Applied Energy, 2015, 154: 173-182.

[2] [2] Xu Y, Hu X, Kundu S, et al. Silicon-based sensors for biomedical applications: a review[J]. Sensors, 2019, 19(13): 2908.

[6] [6] Gambino J P, Adderly S A, Knickerbocker J U. An overview of through-silicon-via technology and manufacturing challenges[J]. Microelectronic Engineering, 2015, 135: 73-106.

[7] [7] Jacobs K J P, Murakami H, Murakami F, et al. Characterization of through-silicon vias using laser terahertz emission microscopy[J]. Nature Electronics, 2021, 4(3): 202-207.

[8] [8] Lin J W, Cheng M H. Investigation of chipping and wear of silicon wafer dicing[J]. Journal of Manufacturing Processes, 2014, 16(3): 373-378.

[9] [9] Gruner A, Naumann L, Schille J, et al. High pulse repetition frequency micro hole drilling of silicon using ultrashort pulse laser radiation[J]. Journal of Laser Micro/Nanoengineering, 2019, 14(3): 190-197.

[10] [10] Zhu H, Xie W, Du W, et al. Fabrication and quality improvement of film cooling holes via picosecond laser drilling assisted by waterjet and post-electrochemical machining[J]. Optics & Laser Technology, 2025, 182: 112162.

[11] [11] Li L, Zhang G, Wong C P. Formation of through silicon vias for silicon interposer in wafer level by metal-assisted chemical etching[J]. IEEE Transactions on Components, Packaging and Manufacturing Technology, 2015, 5(8): 1039-1049.

[12] [12] Kopani M, Mikula M, Kosnac D, et al. Effect of etching time in hydrofluoric acid on the structure and morphology of n-type porous silicon[J]. Applied Surface Science, 2020, 532: 147463.

[13] [13] Allongue P, Jiang P, Kirchner V, et al. Electrochemical micromachining of p-type silicon[J]. The Journal of Physical Chemistry B, 2004, 108(38): 14434-14439.

[16] [16] Long Y, Shi T, Xiong L. Excimer laser electrochemical etching n-Si in the KOH solution[J]. Optics and Lasers in Engineering, 2010, 48(5): 570-574.

[17] [17] Zhu H, Jiang Z, Han J, et al. Fabrication of oxide-free dimple structure on germaniumviaelectrochemical jet machining enhanced by opposing laser irradiation[J]. Journal of Manufacturing Processes, 2023, 85: 623-635.

[18] [18] Zhu H, Wang C, Mao S, et al. Localized and efficient machining of germanium based on the auto-coupling between picosecond laser irradiation and electrochemical dissolution: mechanism validation and surface characterization[J]. Journal of Manufacturing Processes, 2022, 77: 665-677.

[19] [19] Noack J, Vogel A. Laser-induced plasma formation in water at nanosecond to femtosecond time scales: calculation of thresholds, absorption coefficients, and energy density[J]. IEEE Journal of Quantum Electronics, 1999, 35(8): 1156-1167.

[20] [20] Wang L, Guo Z, Deng Y, et al. Experimental research into microgroove stamping by laser-induced cavitation[J]. Optics & Laser Technology, 2022, 146: 107549.

[23] [23] Benedetto E, Capriolo M, Feoli A, et al. A little help for a better understanding and application of Faraday’s law[J]. European Journal of Physics, 2012, 33(3): L15-L20.

[24] [24] Green M A. Intrinsic concentration, effective densities of states, and effective mass in silicon[J]. Journal of Applied Physics, 1990, 67(6): 2944-2954.

[25] [25] Harris C, O’Reilly E P. Nature of the band gap of silicon and germanium nanowires[J]. Physica E: Low-Dimensional Systems and Nanostructures, 2006, 32(1/2): 341-345.

[26] [26] Zhu H, Han J, Wang J, et al. Mechanisms and characterization of a novel hybrid laser-enhanced particle laden electrochemical fabrication process for high quality micro-dimples on germanium wafers[J]. Journal of Materials Processing Technology, 2024, 328: 118392.