[2] Zhang H, Sun Y F, Xiong J X. Design and application of aeroengine combustion chamber test general measurement system[J]. Aeroengine, 45, 67-70(2019).

[3] Cikanek H A, Zhang J. Analysis of the causes of the main engine failure of the space shuttle[J]. Missiles and Space Vehicles, 14-17(1989).

[4] Zhang J, Zhang Q L, Li D et al. Effect of δ aging treatment on microstructure and tensile properties of repaired Inconel 718 alloy using laser additive manufacturing[J]. Chinese Journal of Lasers, 47, 0102001(2020).

[5] Pan B, Huang Y C, Li L Q et al. Effects of multiple laser repairs on microstructure and hardness of ZTC4 titanium alloy[J]. Chinese Journal of Lasers, 46, 1002011(2019).

[6] Pang X T, Gong Q F, Wang Z J et al. Microstructures and mechanical properties of 30CrMnSiA and 30CrMnSiNi2A high-strength steels after laser-cladding repair[J]. Chinese Journal of Lasers, 47, 1102002(2020).

[7] Li J B, Shang S, Sun Y Z et al. Parameter nondimension alization in laser direct metal deposition formation of Inconel 625 and its influence on single track geometric morphology[J]. Chinese Journal of Lasers, 44, 0302010(2017).

[8] Li H B, Li T, Wang X L et al. Study on the influence of the inclined substrate to the energy distribution of laser cladding[J]. Applied Laser, 37, 333-339(2017).

[9] Li H B. Study on the morphology of laser cladding layer on inclined substrate[D](2017).

[10] He Y, Wei J C, Liu J Y et al. Experimental study on the fabrication profile and mechanical properties by substrate-inclined angle using laser melting deposition (LMD) integrating with the substrate of stainless steel[J]. Optics & Laser Technology, 125, 106038(2020). http://www.sciencedirect.com/science/article/pii/S0030399219310205

[11] Yu T B, Qiao R Z, Han J B et al. Residual stress numerical simulation of laser cladding on inclined substrate[J]. Hot Working Technology, 49, 75-79(2020).

[12] He Y. Research on process basis and mechanical properties of laser engineered net shaping basis on inclined substrate[D](2018).

[13] Gu H, Li L. Computational fluid dynamic simulation of gravity and pressure effects in laser metal deposition for potential additive manufacturing in space[J]. International Journal of Heat and Mass Transfer, 140, 51-65(2019).

[14] Batchelor G K. An introduction to fluid dynamics[M](2000).

[15] Voller V R, Prakash C. A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems[J]. International Journal of Heat and Mass Transfer, 30, 1709-1719(1987). http://www.sciencedirect.com/science/article/pii/0017931087903176

[16] Brackbill J U, Kothe D B, Zemach C. A continuum method for modeling surface tension[J]. Journal of Computational Physics, 100, 335-354(1992). http://www.mendeley.com/research-papers/continuum-method-modeling-surface-tension/

[17] Spiegel E A, Veronis G. On the Boussinesq approximation for a compressible fluid[J]. The Astrophysical Journal Letters, 131, 442(1960). http://gji.oxfordjournals.org/external-ref?access_num=10.1086/146849&link_type=DOI

[18] Lu Y, Sun G F, Xiao X F et al. Online stress measurement during laser-aided metallic additive manufacturing[J]. Scientific Reports, 9, 1-11(2019). http://www.nature.com/articles/s41598-019-39849-0

[19] Qian Y H, Tan H, Huang W D. The deposition morphology of laser solid forming on the inclined surface[J]. Applied Laser, 35, 53-57(2015).

[20] Song B X, Yu T B, Jiang X Y et al. The relationship between convection mechanism and solidification structure of the iron-based molten pool in metal laser direct deposition[J]. International Journal of Mechanical Sciences, 165, 105207(2020). http://www.sciencedirect.com/science/article/pii/S0020740319328504