[1] Colling M E, Tourdot B E, Kanthi Y. Inflammation, infection and venous thromboembolism[J]. Circulation Research, 128, 2017-2036(2021).

[2] Ebben H P, Jongkind V, Wisselink W et al. Catheter directed thrombolysis protocols for peripheral arterial occlusions: a systematic review[J]. European Journal of Vascular and Endovascular Surgery, 57, 667-675(2019).

[3] Shen Y, Wang X, Jin S S et al. Increased risk of acute kidney injury with percutaneous mechanical thrombectomy using AngioJet compared with catheter-directed thrombolysis[J]. Journal of Vascular Surgery: Venous and Lymphatic Disorders, 7, 29-37(2019).

[4] Fiorucci B, Isernia G, Simonte G et al. Rheolytic thrombectomy with AngioJet® is safe and effective in revascularization of renal arteries' acute occlusion on previous complex aortic endovascular repair[J]. Annals of Vascular Surgery, 45, 270.e1-270.e6(2017).

[5] Tu T, Toma C, Tapson V F et al. A prospective, single-arm, multicenter trial of catheter-directed mechanical thrombectomy for intermediate-risk acute pulmonary embolism: the FLARE study[J]. JACC: Cardiovascular Interventions, 12, 859-869(2019).

[6] Rethfeld B, Ivanov D S, Garcia M E et al. Modelling ultrafast laser ablation[J]. Journal of Physics D: Applied Physics, 50, 193001(2017).

[7] Zhang J R, Guan K, Zhang Z et al. In vitro evaluation of ultrafast laser drilling large-size holes on sheepshank bone[J]. Optics Express, 28, 25528-25544(2020).

[8] Vogel A, Venugopalan V. Mechanisms of pulsed laser ablation of biological tissues[J]. Chemical Reviews, 103, 577-644(2003).

[9] Kamlage G, Bauer T, Ostendorf A et al. Deep drilling of metals by femtosecond laser pulses[J]. Applied Physics A, 77, 307-310(2003).

[10] Cui M Y, Huang T, Xiao R S. Femtosecond laser direct writing of copper microstructures with high efficiency via thermal effect of nanoparticles[J]. Chinese Journal of Lasers, 49, 0802015(2022).

[11] Zhao Q, Wan H, Yu S T et al. Investigation of flexible nanoporous silver materials fabricated by femtosecond laser[J]. Chinese Journal of Lasers, 48, 0802009(2021).

[12] Bärsch N, Körber K, Ostendorf A et al. Ablation and cutting of planar silicon devices using femtosecond laser pulses[J]. Applied Physics A, 77, 237-242(2003).

[13] Guo H, Yan J F, Li X et al. Patterned graphene oxide by spatially-shaped femtosecond laser[J]. Chinese Journal of Lasers, 48, 0202018(2021).

[14] Chung S H, Mazur E. Surgical applications of femtosecond lasers[J]. Journal of Biophotonics, 2, 557-572(2009).

[15] Hu X Y, Ma Z C, Han B et al. Femtosecond laser fabrication of protein-based smart soft actuators[J]. Chinese Journal of Lasers, 48, 1402001(2021).

[16] Chen L, Nie Q L, Guo F et al. Aging characteristics of superhydrophobic silicone rubber surfaces etched by femtosecond laser[J]. Chinese Journal of Lasers, 49, 1002606(2022).

[17] Momma C, Chichkov B N, Nolte S et al. Short-pulse laser ablation of solid targets[J]. Optics Communications, 129, 134-142(1996).

[18] Lorazo P, Lewis L J, Meunier M. Short-pulse laser ablation of solids: from phase explosion to fragmentation[J]. Physical Review Letters, 91, 225502(2003).

[19] Marjoribanks R S, Dille C, Schoenly J E et al. Ablation and thermal effects in treatment of hard and soft materials and biotissues using ultrafast-laser pulse-train bursts[J]. Photonics & Lasers in Medicine, 1, 155-169(2012).

[20] Herman P R, Oettl A, Chen K P et al. Laser micromachining of transparent fused silica with 1-ps pulses and pulse trains[J]. Proceedings of SPIE, 3616, 148-155(1999).

[21] Ma N, Chen M, Yang C et al. High-efficiency 50 W burst-mode hundred picosecond green laser[J]. High Power Laser Science and Engineering, 8, 5-10(2020).

[22] Butkus S, Jukna V, Paipulas D et al. Micromachining of invar foils with GHz, MHz and kHz femtosecond burst modes[J]. Micromachines, 11, 733(2020).

[23] Kalaycıoğlu H, Elahi P, Akçaalan Ö et al. High-repetition-rate ultrafast fiber lasers for material processing[J]. IEEE Journal of Selected Topics in Quantum Electronics, 24, 8800312(2018).

[24] Račiukaitis G. Ultra-short pulse lasers for microfabrication: a review[J]. IEEE Journal of Selected Topics in Quantum Electronics, 27, 1100112(2021).

[25] Elahi P, Akçaalan Ö, Ertek C et al. High-power Yb-based all-fiber laser delivering 300 fs pulses for high-speed ablation-cooled material removal[J]. Optics Letters, 43, 535-538(2018).

[26] Kerse C, Kalaycıoğlu H, Elahi P et al. Ablation-cooled material removal with ultrafast bursts of pulses[J]. Nature, 537, 84-88(2016).

[27] Sun Z L, Lenzner M, Rudolph W. Generic incubation law for laser damage and ablation thresholds[J]. Journal of Applied Physics, 117, 073102(2015).