[1] [1] KIM J, YOON S Y, CHOI K. Effects of phosphorus diffusion gettering on minority carrier lifetimes of single-crystalline, multi-crystalline and UMG silicon wafer［J］. Current Applied Physics, 2013, 13(9): 2103-2108.

[2] [2] CHO E, OK Y W, DAHAL L D,et al. Comparison of POCl3 diffusion and phosphorus ion-implantation induced gettering in crystalline Si solar cells［J］. Solar Energy Materials and Solar Cells, 2016, 157: 245-249.

[4] [4] LEE E, CHO K, OH D, et al. Exceeding 19% efficient 6 inch screen printed crystalline silicon solar cells with selective emitter［J］. Renewable Energy, 2012, 42: 95-98.

[5] [5] ZHOU Z B, PEREZ-WURFL I, SIMONDS B J. Rapid, deep dopant diffusion in crystalline silicon by laser-induced surface melting［J］. Materials Science in Semiconductor Processing, 2018, 86: 8-17.

[6] [6] OATES A, REEHAL H S. Effect of diffusion parameters on emitter formation in silicon solar cells by proximity rapid thermal diffusion［J］. Materials Science in Semiconductor Processing, 2018, 77: 83-87.

[7] [7] WU S L, LIL, WANG W, et al. Study on the front contact mechanism of screen-printed multi-crystalline silicon solar cells［J］. Solar Energy Materials and Solar Cells, 2015, 141: 80-86.

[8] [8] YCEC, OKAMOTOK, KARPOWICH L, et al. Non-volatile free silver paste formulation for front-side metallization of silicon solar cells［J］. Solar Energy Materials and Solar Cells, 2019, 200: 110040.

[9] [9] SUH D. Efficient implementation of multiple drive-in steps in thermal diffusion of phosphorus for PERC solar cells［J］. Current Applied Physics, 2018, 18(2): 178-182.

[10] [10] YE F, LI Y P, JIA X G, et al. Optimization of phosphorus dopant profile of industrial p-type mono PERC solar cells［J］. Solar Energy Materials and Solar Cells, 2019, 190: 30-36.

[13] [13] DINGD, LU G L, LI Z P, et al. High-efficiency n-type silicon PERT bifacial solar cells with selective emitters and poly-Si based passivating contacts［J］. Solar Energy, 2019, 193: 494-501.

[14] [14] HAYAMAY, TAKAHASHII, USAMI N. Controlling impurity distributions in crystalline Si for solar cells by using artificial designed defects［J］. Journal of Crystal Growth, 2017, 468: 610-613.

[15] [15] RAHMAN M M, MAHAMUDUL H, HASAN M N. Retracted: characterization of recombination properties at diffused surfaces for industrial silicon solar cell concepts［J］. Solar Energy, 2016, 135: 215-221.

[16] [16] ALI A, GOUVEAS T, HASAN M A, et al. Influence of deep level defects on the performance of crystalline silicon solar cells: experimental and simulation study［J］. Solar Energy Materials and Solar Cells, 2011, 95(10): 2805-2810.

[18] [18] LEE H J, KANG M G, CHOI S J, et al. Characteristics of silicon solar cell emitter with a reduced diffused phosphorus inactive layer［J］. Current Applied Physics, 2013, 13(8): 1718-1722.

[19] [19] CUI M L, JIN C G, ZHUGE L J, etal. The impact of diffusion gettering on solar cell efficiency and light induced degradation［J］. Optik, 2019, 181: 129-133.

[20] [20] TYSCHENKO I E, VOELSKOW M, CHERKOV A G, et al. Endotaxial growth of InSb nanocrystals at the bonding interface of the In+ and Sb+ ion implanted SOI structure［J］. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions With Materials and Atoms, 2009, 267(8/9): 1360-1363.

[21] [21] NISHIBATA T, KOHTAKET, KAJIHARA M. Kinetic analysis of uphill diffusion of carbon in austenite phase of low-carbon steels［J］. Materials Transactions, 2020, 61(5): 909-918.

[22] [22] CHANG R D, LING Y T, SU W T. Suppression of uphill diffusion caused by phosphorus deactivation using carbon implantation［J］. Applied Surface Science, 2015, 356: 1150-1154.

[23] [23] DUNG V B. Uphill diffusion of Si-interstitial during boron diffusion in silicon［J］. Indian Journal of Physics, 2017, 91(10): 1233-1236.