Acta Optica Sinica, Volume. 40, Issue 10, 1005001(2020)
Method for Profile Reconstruction of Phase Defects in Extreme Ultraviolet Lithography Mask
[1] Ronse K, Jonckheere R, Gallagher E et al. EUVL is being inserted in manufacturing in 2019: what are the mask related challenges remaining?[J]. Proceedings of SPIE, 11177, 111770A(2019).
[2] Jonckheere R. Overcoming EUV mask blank defects: what we can, and what we should[J]. Proceedings of SPIE, 10454, 104540M(2017).
[3] Jonckheere R. EUV mask defectivity: a process of increasing control toward HVM[J]. Advanced Optical Technologies, 6, 203-220(2017).
[4] Hashimoto T, Yamanashi H, Sugawara M et al. Lithographic characterization of EUVL mask blankdefects[J]. Proceedings of SPIE, 5374, 740-751(2004).
[5] Bakshi V. EUV lithography[M]. 2nd ed. Washington: SPIE, 411-491(2018).
[6] Zhang H, Li S K, Wang X Z et al. Optimization of defect compensation for extreme ultraviolet lithography mask by covariance-matrix-adaption evolution strategy[J]. Nanolithography, MEMS, and MOEMS, 17, 043505(2018).
[7] Kwon H J, Harris-Jones J, Teki R et al. Printability of native blank defects and programmed defects and their stack structures[J]. Proceedings of SPIE, 8166, 81660H(2011).
[8] Tchikoulaeva A, Miyai H, Suzuki T et al. EUV actinic blank inspection: from prototype to production[J]. Proceedings of SPIE, 8679, 86790I(2013).
[9] Pang L Y, Satake M, Li Y et al. EUV multilayer defect compensation (MDC) by absorber pattern modification, film deposition, and multilayer peeling techniques[J]. Proceedings of SPIE, 8679, 86790U(2013).
[10] Stearns D G, Mirkarimi P B, Spiller E. Localized defects in multilayer coatings[J]. Thin Solid Films, 446, 37-49(2004).
[11] Upadhyaya M, Jindal V, Basavalingappa A et al. Evaluating printability of buried native EUV mask phase defects through a modeling and simulation approach[J]. Proceedings of SPIE, 9422, 94220Q(2015).
[12] Upadhyaya M, Basavalingappa A, Herbol H et al. Level-set multilayer growth model for predicting printability of buried native extreme ultraviolet mask defects[J]. Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, 33, 021602(2015).
[13] Xu D B, Evanschitzky P, Erdmann A. Extreme ultraviolet multilayer defect analysis and geometry reconstruction[J]. Nanolithography, MEMS, and MOEMS, 15, 014002(2016).
[14] Rastegar A, Jindal V. EUV mask defects and their removal[J]. Proceedings of SPIE, 8352, 83520W(2012).
[16] Wojdyla A, Benk M P, Naulleau P P et al. EUV photolithography mask inspection using Fourier ptychography[J]. Proceedings of SPIE, 10656, 106560W(2018).
[17] Ou X Z, Horstmeyer R, Zheng G A et al. High numerical aperture Fourier ptychography: principle, implementation and characterization[J]. Optics Express, 23, 3472-3491(2015).
[18] LeCun Y, Bengio Y, Hinton G. Deep learning[J]. Nature, 521, 436-444(2015).
[19] Gu J X, Wang Z H, Kuen J et al. Recent advances in convolutional neural networks[J]. Pattern Recognition, 77, 354-377(2018).
[20] Svozil D, Kvasnicka V, Pospichal J. Introduction to multi-layer feed-forward neural networks[J]. Chemometrics and Intelligent Laboratory Systems, 39, 43-62(1997).
[21] Ito M, Ogawa T, Otaki K et al. Simulation of multilayer defects in extreme ultraviolet masks[J]. Japanese Journal of Applied Physics, 40, 2549-2553(2001).
[24] Mochi I, Goldberg K A, Xie R et al. Quantitative evaluation of mask phase defects from through-focus EUV aerial images[J]. Proceedings of SPIE, 7969, 79691X(2011).
[25] Smaali R, Besacier M, Schiavone P. Three-dimensional rigorous simulation of EUV defective masks using modal method by Fourier expansion[J]. Proceedings of SPIE, 6151, 615124(2006).
[26] Shen L N, Wang X Z, Li S K et al. General analytical expressions for the impact of polarization aberration on lithographic imaging under linearly polarized illumination[J]. Journal of the Optical Society of America A, 33, 1112-1119(2016).
[27] Abadi M, Barham P, Chen J M et al. TensorFlow: a system for large-scale machine learning. [C]∥12th Symposium on Operating Systems Design and Implementation, November 2-4, 2016, Savannah, GA, USA. Berkeley: USENIX, 265-283(2016).
[28] Kingma D P. -01-30)[2019-12-29]. https: ∥arxiv.xilesou., top/abs/1412, 6980(2017).
Get Citation
Copy Citation Text
Wei Cheng, Sikun Li, Xiangzhao Wang, Zinan Zhang. Method for Profile Reconstruction of Phase Defects in Extreme Ultraviolet Lithography Mask[J]. Acta Optica Sinica, 2020, 40(10): 1005001
Category: Diffraction and Gratings
Received: Dec. 30, 2019
Accepted: Feb. 14, 2020
Published Online: Apr. 28, 2020
The Author Email: Li Sikun (lisikun@siom.ac.cn), Wang Xiangzhao (wxz26267@siom.ac.cn)