[1] Oda O. Compound semiconductor bulk materials and characterizations[M]. world scientific, 331(2007).

[2] Ning D D, Chen Y N, Li X K et al. Research on the photoluminescence of spectral broadening by rapid thermal annealing on InAs/GaAs quantum dots[J]. J. Semicond., 41, 122101(2020).

[3] Kroemer H. The 6.1 family (InAs, GaSb, AlSb) and its heterostructures: A selective review[J]. Physica E Low-Dimensional Systems and Nanostructures, 20, 196-203(2004).

[4] Lee H J, Ko S Y, Kim Y H et al. Strain-induced the dark current characteristics in InAs/GaSb type-II superlattice for mid-wave detector[J]. J. Semicond., 41, 062302(2020).

[5] Yu T, Liu S M, Zhang J C et al. InAs-based interband cascade lasers at 4.0 μm operating at room temperature[J]. J. Semicond., 39, 114003(2018).

[6] Reinhardt K. Handbook of Silicon Wafer Cleaning Technology, 2nd Edition[M]. /Handbook of silicon wafer cleaning technology.

[7] Song J S, Choi Y C, Seo S H et al. Wet chemical cleaning process of GaAs substrate for ready-to-use[J]. Journal of Crystal Growth, 264, 98-103(2004).

[8] Sun Y, Liu Z, Machuca F et al. Optimized cleaning method for producing device quality InP(100) surfaces[J]. Journal of Applied Physics, 97, 238-L667(2005).

[9] Guivarc’h A, L’Haridon H, Pelous G et al. Chemical cleaning of InP surfaces: Oxide composition and electrical properties[J]. Journal of Applied Physics, 55, 1139-1148(1984).

[10] Liu Z, Sun Y, Machuca F et al. Optimization and characterization of III–V surface cleaning[J]. Journal of Vacuum ence & Technology B Microelectronics & Nanometer Structures, 21, 184-187(2003).

[11] L'Vova T V, Sedova I V, Dunaevski M S et al. Sulfide passivation of InAs(100) substrates in Na2S solutions[J]. Physics of the Solid State, 51, 1114-1120(2009).

[12] Losurdo M, Giangregorio M et al. InAs(100) surfaces cleaning by an As-free low-temperature 100\\u00b0C treatment[J]. Journal of The Electrochemical Society, 156, H263(2009).

[13] Van Dorp D H, Arnauts S, Holsteyns F et al. Wet-Chemical Approaches for Atomic Layer Etching of Semiconductors: Surface Chemistry, Oxide Removal and Reoxidation of InAs (100)[J]. Ecs Journal of Solid State Science & Technology, 4, N5061-N5066(2015).

[14] Yang L, Tan B M, Liu Y L et al. Optimization of cleaning process parameters to remove abrasive particles in post-Cu CMP cleaning[J]. J. Semicond., 39, 126002(2018).

[15] Yang J, Lu W, Duan M L et al. VGF growth of high quality InAs single crystals with low dislocation density[J]. Journal of Crystal Growth, 531, 125350(2019).

[16] Shen G, Zhao Y, Sun J et al. A comparison of defects between InAs single crystals grown by LEC and VGF methods[J]. Journal of Electronic Materials, 49, 5104-5109(2020).

[17] Lu X, Zhao Y, Sun W et al. Lattice perfection of GaSb and InAs single crystal substrate[J]. Pan Tao Ti Hsueh Pao/Chinese Journal of Semiconductors, 28, 163-166(2007).

[18] Sun J, Shen G Y, Xie H et al. Wet etching generation of dislocation pits with clear facets in LEC-InAs single crystals[J]. Journal of Crystal Growth, 526, 125237(2019).

[19] Reinhardt K A. Handbook of silicon wafer cleaning technology[M]. 2018 Elsevier Inc. Applied science publishers.

[20] WU Jia, XU Zhi-cheng, Chen JX et al. Wet etching for InAs-based InAs/Ga(As)Sb superlattice long wavelength infrared detectors[J]. Journal of Infrared and Millimeter Waves, 38, 549-553(2019).

[21] Liu F, Zhang L D, Liu H et al. Characterization study of native oxides on GaAs(100) surface by XPS[C](2013).

[22] Teng Y, Zhao Y, Wu Q H et al. High performance long-wavelength InAs/GaSb superlattice detectors grown by MOCVD[J]. IEEE Photonic Technology Letters, 31, 185-188(2019).