[1] Guan J, Liu J R, Lei J F et al. The relationship of heat treatment-microstructures-mechanical properties of the TC18 titanium alloy[J]. Chinese Journal of Materials Research, 23, 77-82(2009).

[2] Ivasishin O M, Markovsky P E, Matviychuk Y V et al. A comparative study of the mechanical properties of high-strength β-titanium alloys[J]. Journal of Alloys and Compounds, 457, 296-309(2008). http://www.sciencedirect.com/science/article/pii/S0925838807006998

[3] Sha A X, Wang Q R, Li X W. Research and application of high-strength titanium alloys used in airplane structure[J]. Chinese Journal of Rare Metals, 28, 239-242(2004).

[4] Cao C X. Applications of titanium alloys on large transporter[J]. Rare Metals Letters, 25, 17-21(2006).

[5] Wang K, Meng M, Wang H M. Effect of heat treatment and laser multi-track overlapping on microstructure of a laser melting deposition TC18 titanium alloy[J]. Infrared and Laser Engineering, 39, 521-525(2010).

[6] Qu F S, Zhou J, Liu X G et al. Constitutive equation and processing map of thermal deformation for TC18 titanium alloy[J]. Rare Metal Materials and Engineering, 43, 120-124(2014).

[7] Li C W, Xie H, Mao X N et al. High temperature deformation of TC18 titanium alloy[J]. Rare Metal Materials and Engineering, 46, 326-332(2017). http://www.en.cnki.com.cn/Article_en/CJFDTotal-COSE201702008.htm

[8] Chen T Y, Nie X A, Yi D Q et al. High temperature deformation behavior and processing map of TC18 titanium alloy[J]. Hot Working Technology, 41, 24-28(2012).

[9] Jones N G, Dashwood R J, Dye D et al. Thermomechanical processing of Ti-5Al-5Mo-5V-3Cr[J]. Materials Science and Engineering A, 490, 369-377(2008).

[10] Yang Q, Lu Z L, Huang F X et al[J]. Research on status and development trend of laser additive manufacturing Aeronautical Manufacturing Technology, 2016, 26-31.

[11] Wang H M, Zhang S Q, Wang X M. Progress and challenges of laser direct manufacturing of large titanium structural components[J]. Chinese Journal of Lasers, 36, 3204-3209(2009).

[12] Liu X X, Cheng X, Wang H M et al. Influence of processing conditions on formation of stray grains in DD5 single-crystal superalloys by laser melting multi-traced deposition[J]. Chinese Journal of Lasers, 44, 0602009(2017).

[13] Liu Z W, Cheng X, Li J et al. Heat-processing technology for laser additive manufacturing of 05Cr15Ni5Cu4Nb precipitation-hardening stainless steels[J]. Chinese Journal of Lasers, 44, 0602010(2017).

[14] Liu C M, Tian X J, Tang H B et al. Microstructural characterization of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy[J]. Journal of Alloys and Compounds, 572, 17-24(2013). http://www.sciencedirect.com/science/article/pii/S0925838813008001

[15] Donoghue J, Antonysamy A A, Martina F et al. The effectiveness of combining rolling deformation with wire-arc additive manufacture on β-grain refinement and texture modification in Ti-6Al-4V[J]. Materials Characterization, 114, 103-114(2016). http://www.sciencedirect.com/science/article/pii/S1044580316300262

[16] Jackson M, Jones N G, Dye D et al. Effect of initial microstructure on plastic flow behaviour during isothermal forging of Ti-10V-2Fe-3Al[J]. Materials Science and Engineering A, 501, 248-254(2009). http://www.sciencedirect.com/science/article/pii/S0921509308011635

[18] Zhao J, Zhong J, Yan F et al. Deformation behaviour and mechanisms during hot compression at supertransus temperatures in Ti-10V-2Fe-3Al[J]. Journal of Alloys and Compounds, 710, 616-627(2017). http://www.sciencedirect.com/science/article/pii/S0925838817310113

[19] Li X. Research on hot deformation behavior and optimization of forging process of titanium alloy TC11[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 29-31(2008).

[20] Sellars C M, Mctegart W J. On mechanism of hot deformation[J]. Acta Metallurgica, 14, 1136-1138(1966). http://www.sciencedirect.com/science/article/pii/0001616066902070

[21] Gegel H L, Doraivelu S M et al. . Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242[J]. Metallurgical Transactions A, 15, 1883-1892(1984). http://link.springer.com/article/10.1007/BF02664902

[22] Zu L G. Hot deformation behavior and processing map of Ti-5Al-5Mo-5V-1Cr-1Fe alloy[D]. Changsha: Central South University, 38-51(2012).

[24] Sastry D H, Deevi S C. Processing maps for hot working of a P/M iron aluminide alloy[J]. Intermetallics, 8, 1067-1074(2000). http://www.sciencedirect.com/science/article/pii/S0966979500000418

[26] Hu G X, Cai X, Rong Y H[M]. Fundamentals of materials science, 191-216(2010).

[27] Chen H Q, Cao C X. Characterization of hot deformation microstructures of alpha-beta titanium alloy with equiaxed structure[J]. Transactions of Nonferrous Metals Society of China, 22, 503-509(2012). http://www.sciencedirect.com/science/article/pii/S1003632611612053