[1] Gao P F, Qin G, Wang X X et al. Dependence of mechanical properties on the microstructural parameters of TA15 titanium alloy with tri-modal microstructure[J]. Materials Science and Engineering: A, 739, 203-213(2019).

[2] Xue K M, Guo W W, Shi Y B et al. Microstructure and tensile properties of multi-directional forging of TA15 titanium alloy[J]. Rare Metal Materials and Engineering, 48, 3340-3345(2019).

[3] Yuan L M, Ouyang W T, Qin X et al. Effect of laser shock peening and heat treatment composite process on the surface properties of TC4 titanium alloy[J]. Applied Laser, 43, 114-122(2023).

[4] Ao N, Liu D X, Zhang X H et al. Improved fretting fatigue mechanism of surface-strengthened Ti‒6Al‒4V alloy induced by ultrasonic surface rolling process[J]. International Journal of Fatigue, 170, 107567(2023).

[5] Wang Y M, Wang X, Xu C L et al. Effect of shot peening and nitrogen ion implantation on the fatigue behavior of TA15 titanium alloys[J]. International Journal of Fatigue, 172, 107649(2023).

[6] Wu Y L, Xiong Y, Liu W et al. Effect of supersonic fine particle bombardment on microstructure and fatigue properties of Ti‒6.5Al‒3.5Mo‒1.5Zr‒0.3Si titanium alloy at different temperatures[J]. Surface and Coatings Technology, 421, 127473(2021).

[7] Shadangi Y, Chattopadhyay K, Rai S B et al. Effect of laser shock peening on microstructure, mechanical properties and corrosion behavior of interstitial free steel[J]. Surface and Coatings Technology, 280, 216-224(2015).

[8] Han P P, Jiao Q Y, Zhao D et al. Effect of laser shock peening on residual stress and fatigue property of TA15 titanium alloy with hole[J]. Hot Working Technology, 52, 76-79, 84(2023).

[9] Liao X L, Su B Y, Xu S et al. Flow law of plastic deformation of TC4 titanium alloy by laser shock peening[J]. Chinese Journal of Lasers, 50, 1602206(2023).

[10] Chattopadhyay A, Muvvala G, Sarkar S et al. Effect of laser shock peening on microstructural, mechanical and corrosion properties of laser beam welded commercially pure titanium[J]. Optics & Laser Technology, 133, 106527(2021).

[11] Nie X F, He W F, Zang S L et al. Effects on structure and mechanical properties of TC11 titanium alloy by laser shock peening[J]. Journal of Aerospace Power, 29, 321-327(2014).

[12] Yang T, Zhou W F, Yang J D et al. Effect of laser shot peening on high temperature property of Ti‒6Al‒4V titanium alloy[J]. Laser Technology, 41, 526-530(2017).

[13] Meng X K, Zhang H, Song F Y et al. Microstructure and tensile properties of Ti6Al4V titanium alloy by dual-pulse laser shock peening[J]. Chinese Journal of Lasers, 51, 2002201(2024).

[14] Jin X Y, Lan L, Gao S et al. Effects of laser shock peening on microstructure and fatigue behavior of Ti‒6Al‒4V alloy fabricated via electron beam melting[J]. Materials Science and Engineering: A, 780, 139199(2020).

[15] Luo G L, Zhang L F, Xiong Y et al. Effect of laser shock peening on the corrosion properties of Ti‒6Al‒3Nb‒2Zr‒1Mo alloy[J]. Surface and Coatings Technology, 440, 128425(2022).

[16] Jia W J, Zan Y X, Mao C L et al. Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening[J]. Vacuum, 184, 109906(2021).

[17] Kumar P, Mahobia G S, Chattopadhyay K. Surface nanocrystallization of β-titanium alloy by ultrasonic shot peening[J]. Materials Today: Proceedings, 28, 486-490(2020).

[18] Zhou T, Xiong Y, Chen Z G et al. Effect of surface nano-crystallization induced by supersonic fine particles bombarding on microstructure and mechanical properties of 300M steel[J]. Surface and Coatings Technology, 421, 127381(2021).

[19] Tang C B, Liu D X, Tang B et al. Influence of plasma molybdenizing and shot-peening on fretting damage behavior of titanium alloy[J]. Applied Surface Science, 390, 946-958(2016).

[20] Geng Y X, Mei X S, Wang K D et al. Effect of laser shock peening on residual stress, microstructure and hot corrosion behavior of damage-tolerant TC21 titanium alloy[J]. Journal of Materials Engineering and Performance, 27, 4703-4713(2018).

[21] Zhou L C, Li Y H, He W F et al. Deforming TC6 titanium alloys at ultrahigh strain rates during multiple laser shock peening[J]. Materials Science and Engineering: A, 578, 181-186(2013).

[22] Chen Z G, Wu Y L, Xue Q X et al. Effect of laser shock peening on microstructure and properties of TC11 titanium alloy with lamellar microstructure[J]. Surface Technology, 51, 343-352(2022).

[23] Liu Y G, Li M Q, Liu H J. Surface nanocrystallization and gradient structure developed in the bulk TC4 alloy processed by shot peening[J]. Journal of Alloys and Compounds, 685, 186-193(2016).

[24] Yang Y, Zhang H. Effects of laser shock processing on microstructure and mechanical properties of TC17 titanium alloy[J]. Aluminium Fabrication, 68-72(2022).

[25] Zhu R, Zhang Y K, Zhang C. Surface residual stress, micro-hardness and geometry of TC6 titanium alloy thin-wall parts processed by multiple oblique laser shock peening[J]. Materials Research Express, 7, 106526(2020).

[26] Ye C R, Su J Y, Long Y B et al. Effect of a non‐continuous composite path with zero overlapping rate on cutoff value of detail fatigue rated strength of aerospace titanium Alloy TC4 under laser shock peening[J]. Chinese Journal of Lasers, 51, 2002202(2024).

[27] Lin Y Y, Li J C. Effect of microstructure on static mechanical properties of Ti‒6Al‒4V‒4Zr‒1.5Mo alloy[J]. Hot Working Technology, 42, 70-73(2013).

[28] Li J Q, Lin X, Wang J et al. Effect of stress-relief annealing on anodic dissolution behaviour of additive manufactured Ti‒6Al‒4V via laser solid forming[J]. Corrosion Science, 153, 314-326(2019).

[29] Liu H, Yang J J, Zhao X Y et al. Microstructure, mechanical properties and corrosion behaviors of biomedical Ti‒Zr‒Mo‒xMn alloys for dental application[J]. Corrosion Science, 161, 108195(2019).

[30] Li Z, Zhao W, Xiao G C et al. Impact of microstructure evolution on the corrosion behaviour of the Ti‒6Al‒4V alloy welded joint using high-frequency pulse wave laser[J]. Journal of Materials Research and Technology, 24, 4300-4314(2023).

[31] Li X, Dong Y C, Dan Z H et al. Corrosion behavior of ultrafine grained pure Ti processed by equal channel angular pressing[J]. Acta Metallurgica Sinica, 55, 967-975(2019).

[32] Xie F X, He X B, Cao S L et al. Influence of pore characteristics on microstructure, mechanical properties and corrosion resistance of selective laser sintered porous Ti‒Mo alloys for biomedical applications[J]. Electrochimica Acta, 105, 121-129(2013).

[33] Ma J L, Wen J B, Zhu H X et al. Electrochemical performances of Al‒0.5Mg‒0.1Sn‒0.02In alloy in different solutions for Al‒air battery[J]. Journal of Power Sources, 293, 592-598(2015).

[34] Bai Y, Gai X, Li S J et al. Improved corrosion behaviour of electron beam melted Ti‒6Al‒4V alloy in phosphate buffered saline[J]. Corrosion Science, 123, 289-296(2017).

[35] Lu J W, Ge P, Li Q et al. Effect of microstructure characteristic on mechanical properties and corrosion behavior of new high strength Ti-1300 beta titanium alloy[J]. Journal of Alloys and Compounds, 727, 1126-1135(2017).

[36] Gong X J, Cui Y J, Wei D X et al. Building direction dependence of corrosion resistance property of Ti‒6Al‒4V alloy fabricated by electron beam melting[J]. Corrosion Science, 127, 101-109(2017).

[37] Xia X F, Zhou J Z, Gou Y Q et al. Corrosion resistance of 2024-T351 aluminum alloy processed by laser peening without coating[J]. Chinese Journal of Lasers, 51, 1202204(2024).

[38] Dai N W, Zhang L C, Zhang J X et al. Distinction in corrosion resistance of selective laser melted Ti‒6Al‒4V alloy on different planes[J]. Corrosion Science, 111, 703-710(2016).

[39] Dai N W, Zhang L C, Zhang J X et al. Corrosion behavior of selective laser melted Ti‒6Al‒4V alloy in NaCl solution[J]. Corrosion Science, 102, 484-489(2016).

[40] Yang J J, Yang H H, Yu H C et al. Corrosion behavior of additive manufactured Ti‒6Al‒4V alloy in NaCl solution[J]. Metallurgical and Materials Transactions A, 48, 3583-3593(2017).

[41] Chelariu R, Bolat G, Izquierdo J et al. Metastable beta Ti‒Nb‒Mo alloys with improved corrosion resistance in saline solution[J]. Electrochimica Acta, 137, 280-289(2014).

[42] Luo H, Wang X Z, Dong C F et al. Effect of cold deformation on the corrosion behaviour of UNS S31803 duplex stainless steel in simulated concrete pore solution[J]. Corrosion Science, 124, 178-192(2017).

[43] Luo H, Zou S W, Chen Y H et al. Influence of carbon on the corrosion behaviour of interstitial equiatomic CoCrFeMnNi high-entropy alloys in a chlorinated concrete solution[J]. Corrosion Science, 163, 108287(2020).

[44] Yang Y, Wang B B, Su B X et al. Investigation on corrosion behavior of Zr-bearing TA10-based titanium alloys[J]. Corrosion Science, 221, 111354(2023).

[45] Su B X, Wang B B, Luo L S et al. Tuning microstructure and enhancing corrosion property of Ti‒6Al‒3Nb‒2Zr‒1Mo alloy through electron beam surface melting[J]. Corrosion Science, 206, 110520(2022).

[46] Azar V, Hashemi B, Yazdi M R. The effect of shot peening on fatigue and corrosion behavior of 316L stainless steel in Ringer’s solution[J]. Surface and Coatings Technology, 204, 3546-3551(2010).

[47] Gu Y X, Jiang J H, Ma A B et al. Corrosion behavior of pure titanium processed by rotary-die ECAP[J]. Journal of Materials Research and Technology, 15, 1873-1880(2021).

[48] Gupta R K, Birbilis N. The influence of nanocrystalline structure and processing route on corrosion of stainless steel: a review[J]. Corrosion Science, 92, 1-15(2015).

[49] Wang X Y, Zhu S D, Yang Z G et al. Corrosion-resistance mechanism of TC4 titanium alloy under different stress-loading conditions[J]. Materials, 15, 4381(2022).

[50] Tong Z P, Ren X D, Ren Y P et al. Effect of laser shock peening on microstructure and hot corrosion of TC11 alloy[J]. Surface and Coatings Technology, 335, 32-40(2018).