[1] YOU K Y, YAN G P, LUO X C et al. Advances in laser assisted machining of hard and brittle materials[J]. Journal of Manufacturing Processes, 58, 677-692(2020).

[2] 李秋怡, 周天丰, 周佳. 光刻胶掩膜材料超光滑表面切削[J]. 光学 精密工程, 31, 1909-1921(2023).

     LI Q Y, ZHOU T F, ZHOU J et al. Ultra-precision cutting of photoresist mask for ultra-smooth surface[J]. Opt. Precision Eng., 31, 1909-1921(2023).

[3] CHEN X, KE J Y, SHE ZH D et al. Optimization of process parameters and surface characteristics in laser-assisted ultra-precision cutting of monocrystalline silicon[J]. Opt. Precision Eng., 31, 99-108(2023).

     陈肖, 柯金洋, 佘中迪. 单晶硅激光辅助超精密切削工艺优化与表面特性[J]. 光学 精密工程, 31, 99-108(2023).

[4] NAKANO T, KORESAWA H, NARAHARA H. Tool condition monitoring method by anomaly segmentation of time-frequency images using acoustic emission in small hole drilling[J]. Journal of Advanced Mechanical Design， Systems， and Manufacturing, 17(2023).

[5] BINALI R, KUNTOĞLU M, PIMENOV D Y et al. Advance monitoring of hole machining operations via intelligent measurement systems： a critical review and future trends[J]. Measurement, 201, 111757(2022).

[6] LU B, LUO Y M. A dynamic condition-based maintenance policy for heterogeneous-wearing tools with considering product quality deterioration[J]. International Journal of Production Research, 62, 7096-7113(2024).

[7] ASTAKHOV V P. The mechanisms of bell mouth formation in gundrilling when the drill rotates and the workpiece is stationary. Part 2： the second stage of drill entrance[J]. International Journal of Machine Tools and Manufacture, 42, 1145-1152(2002).

[8] DEMIR Z. Investigate the fluctuation size in thrust force and chip morphology in drilling[J]. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, 14, 385-397(2018).

[9] ZHU K P, ZHANG Y. A generic tool wear model and its application to force modeling and wear monitoring in high speed milling[J]. Mechanical Systems and Signal Processing, 115, 147-161(2019).

[10] RIZAL M, GHANI J A, NUAWI M Z et al. The application of I-kazTM-based method for tool wear monitoring using cutting force signal[J]. Procedia Engineering, 68, 461-468(2013).

[11] SANCHEZ Y, TRUJILLO F J, SEVILLA L et al. Indirect monitoring method of tool wear using the analysis of cutting force during dry machining of Ti alloys[J]. Procedia Manufacturing, 13, 623-630(2017).

[12] LIU Q, GAO D Y, JIA R H et al. Investigating the cutting force monitoring system in the boring process[J]. The International Journal of Advanced Manufacturing Technology, 119, 3703-3715(2022).

[13] DONG G J, WANG L, LI C et al. Investigation on ultrasonic elliptical vibration boring of deep holes with large depth-diameter ratio for high-strength steel 18Cr₂Ni₄WA[J]. The International Journal of Advanced Manufacturing Technology, 108, 1527-1539(2020).

[14] TAMURA S, MATSUMURA T. Cutting process in non-step drilling of deep hole with tool wear progress[J]. Journal of Advanced Mechanical Design， Systems， and Manufacturing, 18(2024).

[15] HAN C, ZHANG D H, LUO M et al. Chip evacuation force modelling for deep hole drilling with twist drills[J]. The International Journal of Advanced Manufacturing Technology, 98, 3091-3103(2018).

[16] LIANG J B, JIAO L, YAN P et al. Research on deep-hole drilling of high-strength steel using slender Gun drill[J]. International Journal of Precision Engineering and Manufacturing, 23, 853-868(2022).