[1] Kumar S, Dang T D, Arnold F E et al. Synthesis, structure, and properties of PBO/SWNT composites[J]. Macromolecules, 35, 9039-9043(2002). http://pubs.acs.org/doi/abs/10.1021/ma0205055

[2] Hua J S, Li Y X, Liu X Y et al. Graphene/MWNT/poly(p-phenylenebenzobisoxazole) multiphase nanocomposite via solution prepolymerization with superior microwave absorption properties and thermal stability[J]. The Journal of Physical Chemistry C, 121, 1072-1081(2017).

[3] Stock J W, Zaeh M F, Spaeth J P. Remote laser cutting of CFRP: influence of the edge quality on fatigue strength[J]. Proceedings of SPIE, 8963, 89630T(2014).

[4] Zhang L L, Jiang Z H, Zhang W et al. A review of laser processing fiber-reinforced flexible composite material[J]. Applied Laser, 32, 238-243(2012).

[5] Tagliaferri V, Di Ilio A, Visconti C. Laser cutting of fibre-reinforced polyesters[J]. Composites, 16, 317-325(1985).

[6] Fenoughty K A, Jawaid A, Pashby I R. Machining of advanced engineering materials using traditional and laser techniques[J]. Journal of Materials Processing Technology, 42, 391-400(1994).

[7] Yung K C, Mei S M, Yue T M. A study of the heat-affected zone in the UV YAG laser drilling of GFRP materials[J]. Journal of Materials Processing Technology, 122, 278-285(2002).

[8] Freitag C, Wiedenmann M, Negel J P et al. High-quality processing of CFRP with a 1.1-kW picosecond laser[J]. Applied Physics A, 119, 1237-1243(2015).

[9] Salama A, Li L, Mativenga P et al. High-power picosecond laser drilling/machining of carbon fibre-reinforced polymer (CFRP) composites[J]. Applied Physics A, 122, 1-11(2016).

[10] Lau W S, Lee W B, Pang S Q. Pulsed Nd∶YAG laser cutting of carbon fibre composite materials[J]. CIRP Annals, 39, 179-182(1990).

[11] Staehr R, Bluemel S, Hansen P et al. The influence of moisture content on the heat affected zone and the resulting in-plane shear strength of laser cut thermoplastic CFRP[J]. Plastics Rubber and Composites, 44, 111-116(2015).

[12] Thomas H, Bernhard K, Frank S. Micromachining with picosecond laser pulses[J]. Industrial Laser Solutions, 199, 34(2004).

[13] Chen G Y, Zhu Z C, Yin J et al. Experiment on ablation threshold of single crystal diamond produced by femtosecond laser processing[J]. Chinese Journal of Lasers, 46, 0402001(2019).

[14] Takahashi K, Tsukamoto M, Masuno S et al. Influence of laser scanning conditions on CFRP processing with a pulsed fiber laser[J]. Journal of Materials Processing Technology, 222, 110-121(2015).

[15] Li Z L, Zheng H Y, Lim G C et al. Study on UV laser machining quality of carbon fibre reinforced composites[J]. Composites Part A, 41, 1403-1408(2010).

[16] Anisimov S I, Kapeliovich B L, Perelman T L et al. Electron emission from metal surfaces exposed to ultrashort laser pulses[J]. Soviet Physics-JETP, 39, 375-378(1974).

[17] Jiang Y. Research on cutting carbon-fiber reinforced plastic with picosecond pulsed laser and its connection with aluminum alloy[D]. Changsha: Hunan University(2017).

[18] Romoli L, Fischer F, Kling R. A study on UV laser drilling of PEEK reinforced with carbon fibers[J]. Optics and Lasers in Engineering, 50, 449-457(2012).

[19] Zhu X N, Bao W X. Fundamentals of ultrashort pulse laser and its applications[J]. Chinese Journal of Lasers, 46, 1200001(2019).

[20] Jia B S, Tang H P, Su C Z et al. Removal of surface coating of resin matrix composites by pulsed laser[J]. Chinese Journal of Lasers, 46, 1202010(2019).

[21] Patel R S, Bovatsek J. Processing benefits of high repetition rate and high average power 355 nm laser for micromachining of microelectronics packaging materials[J]. Proceedings of SPIE, 6459, 64590H(2007).

[22] Srinivasan R, Maynebanton V. Self-developing photoetching of poly(ethylene terephthalate) films by far-ultraviolet excimer laser radiation[J]. Applied Physics Letters, 41, 576-578(1982).

[23] Goeke A, Emmelmann C. Influence of laser cutting parameters on CFRP part quality[J]. Physics Procedia, 5, 253-258(2010).

[24] Al-Sulaiman F A, Yilbas B S, Ahsan M. CO2 laser cutting of a carbon/carbon multi-lamelled plain-weave structure[J]. Journal of Materials Processing Technology, 173, 345-351(2006).

[25] Wahab M S, Rahim E A, Rahman N A et al. Laser cutting characteristic on the laminated carbon fiber reinforced plastics (CFRP) composite of aerospace structure panel[J]. Advanced Materials Research, 576, 503-506(2012).

[26] Kononenko T V, Freitag C, Komlenok M S et al. Oxygen-assisted multipass cutting of carbon fiber reinforced plastics with ultra-short laser pulses[J]. Journal of Applied Physics, 115, 103107(2014).

[27] Niino H, Harada Y, Anzai K J et al. 2D/3D laser cutting of carbon fiber reinforced plastic (CFRP) by fiber laser irradiation[J]. Proceedings of SPIE, 9353, 935303(2015).

[28] Weber R, Freitag C, Kononenko T V et al. Short-pulse laser processing of CFRP[J]. Physics Procedia, 39, 137-146(2012).