[1] Ban H Y, Bai R S, Chung K F et al. Post-fire material properties of stainless-clad bimetallic steel[J]. Fire Safety Journal, 112, 102964(2020).

[2] Yu W X, Liu B X, Chen C X et al. Microstructure and mechanical properties of stainless steel clad plate welding joints by different welding processes[J]. Science and Technology of Welding and Joining, 25, 571-580(2020).

[3] Chu Q L, Tong X W, Xu S et al. Interfacial investigation of explosion-welded titanium/steel bimetallic plates[J]. Journal of Materials Engineering and Performance, 29, 78-86(2020).

[4] Liu X F, Bai Y L, Li J K et al. Influence factors of interfacial bonding strength of cold rolled titanium/steel laminated composite plates[J]. Journal of Materials Engineering, 48, 119-126(2020).

[5] Chen Y, Wang A Q, Tian H W et al. Study on optimization of nozzle for copper-aluminium clad plate twin-roll cast-rolling[J]. Journal of Materials Research and Technology, 10, 1075-1085(2021).

[6] Keller C, Moisy F, Nguyen N et al. Microstructure and mechanical properties characterization of architectured copper aluminum composites manufactured by cold-drawing[J]. Materials Characterization, 172, 110824(2021).

[7] Xiao H, Xu P P, Qi Z C et al. Preparation of steel/aluminum laminated composites by differential temperature rolling with induction heating[J]. Acta Metallurgica Sinica, 56, 231-239(2020).

[8] Woo Y Y, Oh I Y, Hwang T W et al. Analysis of shape defects during flexible roll forming of steel/aluminum double-layered blanks[J]. International Journal of Material Forming, 13, 861-872(2020).

[9] Wang H M, Zhang S Q, Wang X M. Progress and challenges of laser direct manufacturing of large titanium structural components(invited paper)[J]. Chinese Journal of Lasers, 36, 3204-3209(2009).

[10] Zhou Y F, Qin G K, Li L et al. Formability, microstructure and mechanical properties of Ti-6Al-4V deposited by wire and arc additive manufacturing with different deposition paths[J]. Materials Science and Engineering: A, 772, 138654(2020).

[11] Tian X Y, Wu L L, Gu D D et al. Roadmap for additive manufacturing: toward intellectualization and industrialization[J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 1, 100014(2022).

[12] Yang Q F, Xia C J, Deng Y Q et al. Microstructure and mechanical properties of AlSi7Mg0.6 aluminum alloy fabricated by wire and arc additive manufacturing based on cold metal transfer (WAAM-CMT)[J]. Materials, 12, 2525(2019).

[13] Wang D, Deng G W, Yang Y Q et al. Research progress on additive manufacturing of metallic heterogeneous materials[J]. Journal of Mechanical Engineering, 57, 186-198(2021).

[14] Wang Y R, Teng W H, Yu Y et al. Electron beam welding-brazing of Al/Ti dissimilar alloys[J]. Journal of Mechanical Engineering, 48, 91-95(2012).

[15] Wei H L, Liu F Q, Liao W H et al. Prediction of spatiotemporal variations of deposit profiles and inter-track voids during laser directed energy deposition[J]. Additive Manufacturing, 34, 101219(2020).

[16] Zhao Y H, He C, Zou J et al. Effect of eternal feld on microstructure and properties of Al-Mg-Sc-Zr alloy prepared by laser melting deposition[J]. Acta Optica Sinica, 43, 0214002(2023).

[17] Yang G, Zou W B, Wang C et al. Microstructure and properties of laser additive jointing heterogeneous aluminum alloys[J]. Chinese Journal of Lasers, 49, 2202010(2022).

[18] Li B H, Guo S Q, Zhou B et al. Establishment and verification of thermo-mechanical coupled model for laser direct deposition of titanium alloy[J]. Laser & Optoelectronics Progress, 59, 1114007(2022).

[19] Cao S N, Gu D D, Shi Q M. Relation of microstructure, microhardness and underlying thermodynamics in molten pools of laser melting deposition processed TiC/Inconel 625 composites[J]. Journal of Alloys and Compounds, 692, 758-769(2017).

[20] Qi S W, Rong P, Huang D et al. Room- and high-temperature mechanical properties of aluminum alloys fabricated using laser powder bed fusion additive manufacturing[J]. Chinese Journal of Lasers, 49, 0802001(2022).

[21] Hu Z Q, Lin H, Qin X P. Region-based path planning method with all horizontal welding position for robotic curved layer wire and arc additive manufacturing[J]. Robotics and Computer-Integrated Manufacturing, 74, 102286(2022).

[22] Zhao D H, Li T Q, Jiang Y C. A multi-DOF rotary 3D printer: machine design, performance analysis and process planning of curved layer fused deposition modeling (CLFDM)[J]. Rapid Prototyping Journal, 26, 1079-1093(2020).

[23] Gan Z T, Yu G, He X L. Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel[J]. International Journal of Heat and Mass Transfer, 104, 28-38(2017).