[1] Toyserkani E, Khajepour A, Corbin S F[M]. Laser cladding(2004).

[2] Wan X R, Xu C G[M]. High strength and ultra-high strength steel(1988).

[3] Wang H M. Research progress on laser surface modifications of metallic materials and laser rapid forming of high performance metallic components[J]. Acta Aeronautica et Astronautica Sinica, 23, 473-478(2002).

[4] Sun S D, Liu Q C, Brandt M et al. Effect of laser clad repair on the fatigue behaviour of ultra-high strength AISI 4340 steel[J]. Materials Science and Engineering: A, 606, 46-57(2014).

[5] Sun S D, Liu Q C, Barr C et al. In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substrates[J]. Surface and Coatings Technology, 333, 210-219(2018).

[6] Rahman Rashid R A, Nazari K A, Barr C et al. Effect of laser reheat post-treatment on the microstructural characteristics of laser-cladded ultra-high strength steel[J]. Surface and Coatings Technology, 372, 93-102(2019). http://www.researchgate.net/publication/332975963_Effect_of_laser_reheat_post-treatment_on_the_microstructural_characteristics_of_laser-cladded_ultra-high_strength_steel

[7] Liu J, Li J, Cheng X et al. Effect of dilution and macrosegregation on corrosion resistance of laser clad AerMet100 steel coating on 300M steel substrate[J]. Surface and Coatings Technology, 325, 352-359(2017). http://www.sciencedirect.com/science/article/pii/S0257897217303808

[8] Lourenço J M, Sun S D, Sharp K et al. Fatigue and fracture behavior of laser clad repair of AerMet ® 100 ultra-high strength steel[J]. International Journal of Fatigue, 85, 18-30(2016).

[9] Sun G F, Yao S, Wang Z D et al. Microstructure and mechanical properties of HSLA-100 steel repaired by laser metal deposition[J]. Surface and Coatings Technology, 351, 198-211(2018). http://www.sciencedirect.com/science/article/pii/S0257897218307473

[10] Rahman Rashid R A, Barr C J, Palanisamy S et al. Effect of clad orientation on the mechanical properties of laser-clad repaired ultra-high strength 300M steel[J]. Surface and Coatings Technology, 380, 125090(2019). http://www.sciencedirect.com/science/article/pii/S0257897219310813

[11] Barr C, Shi D S, Easton M et al. Influence of macrosegregation on solidification cracking in laser clad ultra-high strength steels[J]. Surface and Coatings Technology, 340, 126-136(2018).

[12] Liu J, Li J, Cheng X et al. Microstructures and tensile properties of laser cladded AerMet100 steel coating on 300M steel[J]. Journal of Materials Science & Technology, 34, 643-652(2018). http://www.sciencedirect.com/science/article/pii/S1005030217303006?utm_source=TrendMD&utm_medium=cpc

[13] Li Y J, Zou Z D, Chen Z N et al. Effects of the weld thermal cycle on microstructure and properties of the heat-affected zone of HQ130 steel[J]. Acta Metallrugica Sinica, 32, 532-537(1996).

[14] Wang L, Liu Y, Zhou Y et al. Softening mechanism analysis of welding heat affected zone of low carbon microalloyed steel[J]. Transactions of Materials and Heat Treatment, 40, 106-113(2019).

[15] Li F Q, Feng S, Li M W et al. Softening phenomenon of heat-affected zone in laser welding of 6082 Al alloys with filler wire[J]. Chinese Journal of Lasers, 45, 1102007(2018).

[16] Li X J, Huang J, Pan H et al. Microstructure and formability of laser welding joint of QP1180 high-strength steel sheet[J]. Chinese Journal of Lasers, 46, 0302006(2019).

[17] Jing C N, Fan J C, Ni X M et al. Microstructure and mechanical properties of laser welded joints for dissimilar steel with different thicknesses[J]. Chinese Journal of Lasers, 41, 0803005(2014).

[18] Telasang G, Dutta Majumdar J, Padmanabham G et al. Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steel[J]. Surface and Coatings Technology, 258, 1108-1118(2014).

[19] Shiue R K, Chen C. Laser transformation hardening of tempered 4340 steel[J]. Metallurgical Transactions A, 23, 163-170(1992). http://link.springer.com/article/10.1007/BF02660862

[20] Xu B S, Fang J X, Dong S Y et al. Heat-affected zone microstructure evolution and its effects on mechanical properties for laser cladding FV520B stainless steel[J]. Acta Metallurgica Sinica, 52, 1-9(2016).

[21] Li R T, Zuo X R, Hu Y Y et al. Microstructure and properties of pipeline steel with a ferrite/martensite dual-phase microstructure[J]. Materials Characterization, 62, 801-806(2011). http://www.sciencedirect.com/science/article/pii/S1044580311001392

[22] Yang L Q, Ding Y X. Status and development of research of laser transformation hardening[J]. Hot Working Technology, 35, 68-70, 74(2006).

[23] Pan F S, Ding P D, Zhou S Z et al. Effects of silicon additions on the mechanical properties and microstructure of high speed steels[J]. Acta Materialia, 45, 4703-4712(1997). http://www.sciencedirect.com/science/article/pii/S1359645497001213

[24] Zhou S, Zhang K, Wang Y et al. High strength-elongation product of Nb-microalloyed low-carbon steel by a novel quenching-partitioning-tempering process[J]. Materials Science and Engineering: A, 528, 8006-8012(2011). http://www.sciencedirect.com/science/article/pii/S0921509311007738

[25] Son Y I, Lee Y K, Park K T et al. Ultrafine grained ferrite-martensite dual phase steels fabricated via equal channel angular pressing: microstructure and tensile properties[J]. Acta Materialia, 53, 3125-3134(2005).

[26] Jacques P J, Furnémont Q, Lani F et al. Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing[J]. Acta Materialia, 55, 3681-3693(2007). http://www.sciencedirect.com/science/article/pii/S1359645407001760

[27] Shi J, Sun X J, Wang M Q et al. Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite[J]. Scripta Materialia, 63, 815-818(2010). http://www.sciencedirect.com/science/article/pii/S1359646210004082