[1] Wu S C, Hu Y N, Yang B et al. Review on defect characterization and structural integrity assessment method of additively manufactured materials[J]. Journal of Mechanical Engineering, 57, 3-34(2021).

[2] Zhang Y J, Song B, Zhao X et al. Selective laser melting and subtractive hybrid manufacture AISI 420 stainless steel: evolution on surface roughness and residual stress[J]. Journal of Mechanical Engineering, 54, 170-178(2018).

[3] Ma Q P, Mesicek J, Fojtik F et al. Residual stress build-up in aluminum parts fabricated with SLM technology using the bridge curvature method[J]. Materials, 15, 6057(2022).

[4] Kremer R, Khani S, Appel T et al. Selective laser melting of CuSn10: simulation of mechanical properties, microstructure, and residual stresses[J]. Materials, 15, 3902(2022).

[5] Liu Z D, Zheng X T, Fan W J et al. Effect of process-induced residual stress on strength of UAV composite wing[J]. Acta Aeronautica et Astronautica Sinica, 43, 526117(2022).

[6] Du C, Zhang J, Lian Y et al. Research progress on residual stress in laser additive manufacturing[J]. Surface Technology, 48, 200-207(2019).

[7] Wang Y F, Lin X, Kang N et al. Influence of post-heat treatment on the microstructure and mechanical properties of Al-Cu-Mg-Zr alloy manufactured by selective laser melting[J]. Journal of Materials Science & Technology, 111, 35-48(2022).

[8] Xu H M, Huang H H. Microstructure evolution and mechanical properties of thermally sprayed coating modified by laser remelting and injection with tungsten carbide[J]. Ceramics International, 48, 22854-22868(2022).

[9] Lee K H, Yun G J. Prediction of melt pool dimension and residual stress evolution with thermodynamically-consistent phase field and consolidation models during re-melting process of SLM[J]. Computers, Materials & Continua, 66, 87-112(2020).

[10] Karimi J, Antonov M, Kollo L et al. Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy[J]. Journal of Alloys and Compounds, 897, 163207(2022).

[11] Han Q Q, Jiao Y. Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting[J]. The International Journal of Advanced Manufacturing Technology, 102, 3315-3324(2019).

[12] Deng D W, Ma Y B, Ma Y S et al. Influence of remelting and annealing on residual stress of 316L stainless steel laser clad layer[J]. Heat Treatment of Metals, 45, 113-118(2020).

[13] Bian Y C, Peng Y B, Song L F et al. Heterogeneity of 316L/IN718 formed via selective laser melting based on laser remelting optimization process[J]. Chinese Journal of Lasers, 48, 1802009(2021).

[14] Li J, Yang L J, Zheng H et al. Influence of laser selection melting times on the surface properties of 316L stainless steel[J]. Surface Technology, 50, 93-100(2021).

[15] Bian P Y, Yin E H. Effect of laser power for metal selective laser melting on morphology of 316L stainless steel molten pool and residual stress[J]. Laser & Optoelectronics Progress, 57, 011403(2020).

[16] Li G Q, Wang L F, Zhu G X et al. Influence of scanning patterns on residual stress of cladding layer and substrate deformation produced by hollow-ring laser cladding[J]. Surface Technology, 50, 158-170(2021).

[17] Xu J C, Xia Z X, Chen P et al. Modeling of hollow ring laser heat source and finite element simulation of temperature field[J]. Chinese Journal of Lasers, 48, 1701003(2021).

[18] Ao X H, Liu J H, Xia H X et al. A review of meso-micro modeling and simulation methods of selective laser melting process[J]. Journal of Mechanical Engineering, 58, 239-257(2022).

[19] Mercelis P, Kruth J P. Residual stresses in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 12, 254-265(2006).

[20] Chen S, Tao F H, Jia C Z et al. Effect of laser remelting on microstructure and properties of 4Cr5MoSiV1 steel fabricated by selective laser melting[J]. Surface Technology, 49, 209-219(2020).