[2] Nie R T. Analysis of bolt assembly problems in production of automobile[J]. Sci-Tech & Development of Enterprise, 43-45(2013).

[3] Ding B Z, Li Z J, Yong H B. Classification and hardness test of commonly used engineering bolt[J]. Building Technology, 5, 30-32(2021).

[4] Yu M, Bao Y Q. Application of three coordinate measurement technology in modern machinery manufacturing industry[J]. Internal Combustion Engine & Parts, 103-105(2024).

[5] Zhu H D, Lou X P, Deng W Y et al. Image element recognition in 2D machine vision measurement[J]. Computer Engineering and Applications, 42, 217-218(2006).

[6] Zhou Y D, Liao X B, Cai Y. A Method for measuring the inside and outside diameter of multi-tube workpiece based machine vision[J]. Machinery Design & Manufacture, 119-122(2018).

[7] Chen T Y, Jiang C Y, Tao G H et al. Visual detection method for L-angle gap of automatic positioning measurement[J]. Tool Engineering, 58, 154-160(2024).

[8] Shao Y Z, Xue W, Deng D X et al. Investigation and optimization of a novel precision measurement method based on template matching[J]. Measurement Science and Technology, 33, 085017(2022).

[9] Li J. Research on image measurement system for shaft parts[D](2019).

[10] Cai F. High-precision intelligent measurement system for hole and shaft parts based on optical-mechanical cooperation[D](2019).

[11] Ren X P, Zhang D C. Method of section profile detection and dimension measurement of track steel[J]. Modern Electronics Technique, 45, 113-117(2022).

[12] Sun T, Yu P P, Wang S. Design of intelligent detection system for standard bolt based on maintenance[J]. Aviation Maintenance & Engineering, 53-56(2018).

[13] Huang N H, Wang Z C, Zhou X E. The measurement system of the screw hole position and size of the long 3C shell based on machine vision[J]. Mechanical & Electrical Engineering Technology, 51, 78-83(2022).

[14] di Leo G, Liguori C, Pietrosanto A et al. A vision system for the online quality monitoring of industrial manufacturing[J]. Optics and Lasers in Engineering, 89, 162-168(2017).

[15] Deshpande A, Patavardhan P, Rao D H. Super resolution based low cost vision system[C](2015).

[16] Ribo M, Brandner M. State of the art on vision-based structured light systems for 3D measurements[C], 2-6(2006).

[17] Hong H Y, Wu Y Q, Ye L et al. High-precision three-dimensional measurement method of workpiece based on line-structured light scanning[J]. Journal of Wuhan Institute of Technology, 46, 66-71(2024).

[18] Zhang H T, Huang D P, Wang Y J. Research on multi-view 3D measurement technology of blade based on linear structured light[J]. Industrial Engineering and Innovation Management, 7, 47-60(2024).

[19] Khanafer M, Shirmohammadi S. Applied AI in instrumentation and measurement: the deep learning revolution[J]. IEEE Instrumentation & Measurement Magazine, 23, 10-17(2020).

[20] Huang X Y, Liu Z L, Zhang X Y et al. Surface damage detection for steel wire ropes using deep learning and computer vision techniques[J]. Measurement, 161, 107843(2020).

[21] Zhong J P, Liu Z G, Han Z W et al. A CNN-based defect inspection method for catenary split pins in high-speed railway[J]. IEEE Transactions on Instrumentation and Measurement, 68, 2849-2860(2019).

[22] Ghosal S, Mehrotra R. Orthogonal moment operators for subpixel edge detection[J]. Pattern Recognition, 26, 295-306(1993).

[23] Xiao C H, Yung N H C. Corner detector based on global and local curvature properties[J]. Optical Engineering, 47, 057008(2008).