[1] Ye J, Chen L, Li X, et al. Review of optical freeform surface representation technique and its application[J]. Optical Engineering, 56, 1(2017).

[2] Savio E, Chiffre L D, Schmitt R. Metrology of freeform shaped parts[J]. CIRP Annals-Manufacturing Technology, 56, 810-835(2007).

[3] Thompson K P, Rolland J P. Freeform optical surfaces: A revolution in imaging optical design[J]. Optics & Photonics News, 23, 30-35(2012).

[4] Cheng D, Wang Y, Hua H, et al. Design of an optical see-through head-mounted display with a low f-number and large field of view using a freeform prism[J]. Applied Optics, 48, 2655(2009).

[5] Fang F Z, Zhang X D, Weckenmann A, et al. Manufacturing and measurement of freeform optics[J]. CIRP Annals-Manufacturing Technology, 62, 823-846(2013).

[6] Chiffre L D, Kunzmann H, Peggs G N, et al. Surfaces in precision engineering, microengineering and nanotechnology[J]. Cirp Annals Manufacturing Technology, 52, 561-577(2003).

[7] [7] Tohme Yazid E, Lowe Jeff A. Machining of freefm optical surfaces by slow slide servo method[C]Proceedings of the American Society f Precision Engineering, 2004.

[8] Yin Z Q, Dai Y F, Li S Y, et al. Fabrication of off-axis aspheric surfaces using a slow tool servo[J]. International Journal of Machine Tools & Manufacture, 51, 404-410(2011).

[9] Bi Q, Huang N, Sun C, et al. Identification and compensation of geometric errors of rotary axes on five-axis machine by on-machine measurement[J]. International Journal of Machine Tools and Manufacture, 89, 182-191(2015).

[10] Mayr J, Jedrzejewski J, Uhlmann E, et al. Thermal issues in machine tools[J]. CIRP Annals, 61, 771-791(2012).

[11] Zhang X D, Zeng Z, Liu X L, et al. Compensation strategy for machining optical freeform surfaces by the combined on- and off-machine measurement[J]. Optics Express, 23, 24800-24810(2015).

[12] Ramesh R, Mannan M A, Poo A N. Error compensation in machine tools-a review. Part II: Thermal errors[J]. International Journal of Machine Tools and Manufacture, 40, 1257-1284(2000).

[13] Zhang Lei, Liu Dong, Shi Tu, et al. Optical free-form surfaces testing technologies[J]. Chinese J Optics, 10, 283-299(2017).

[14] Li Y, Gu P. Free-form surface inspection techniques state of the art review[J]. Computer-Aided Design, 36, 1395-1417(2004).

[15] Li D, Tong Z, Jiang X, et al. Calibration of an interferometric on-machine probing system on an ultra-precision turning machine[J]. Measurement, 118, 96-104(2018).

[16] Burada D R, Pant K K, Mishra V, et al. Development of a metrology technique suitable for in situ measurement and corrective manufacturing of freeform optics[J]. Advanced Optical Technologies, 8, 203-215(2019).

[17] Sepp J, Niemel K, Lassila A. Metrological characterization methods for confocal chromatic line sensors and optical topography sensors[J]. Measurement Science and Technology, 29, 054008(2018).

[18] [18] Defisher S, Bechtold M, Mohring D. A noncontact surface measurement system f freefm confmal optics[C]Proceedings of SPIE, 2011, 8016: 80160W.

[19] Nouira H, El-Hayek N, Yuan X, et al. Metrological characterization of optical confocal sensors measurements (20 and 350 travel ranges)[J]. Journal of Physics: Conference Series, 483, 012015(2014).

[20] Owens J C. Optical refractive index of air: Dependence on pressure, temperature and composition[J]. Applied Optics, 6, 51(1967).

[21] Quinsat Y, Tournier C. In situ non-contact measurements of surface roughness[J]. Precision Engineering, 36, 97-103(2012).

[22] Yu Jun, Shen Zhengxiang, Wang Xiaoqiang, et al. In situ noncontact measurement system and two-step compensation strategy for ultra-precision diamond machining[J]. Optics Express, 26, 30724-30739(2018).

[23] [23] Hopper L, Noste T, Miller J, et al. Err sources, compensation, probe path optimization f onmachine metrology of freefm optics[C]Optical Manufacturing Testing XIII, 2020, 11487: 1148709.

[24] Menq C H, Yau H T, Lai G Y. Automated precision measurement of surface profile in CAD-directed inspection[J]. IEEE Transactions on Robotics & Automation, 8, 268-278(1992).