[1] Liu C Q, Xiong F, Peng L S et al. The latest research progress of extreme high-speed laser material deposition:[J/OL]. Materials Reports, 1-32. http:∥kns.cnki.net/kcms/detail/50.1078.TB.20230825.0957.004.html

[2] Ghosh S, Bibhanshu N, Suwas S et al. Micro-mechanisms underlying enhanced fatigue life of additively manufactured 316L stainless steel with a gradient heterogeneous microstructure[J]. Materials Science and Engineering: A, 886, 145665(2023).

[3] Li W Q, Meng L X, Wang S et al. Plastic deformation behavior and strengthening mechanism of SLM 316L reinforced by micro-TiC particles[J]. Materials Science and Engineering: A, 884, 145557(2023).

[4] Gao X. Study on composition and technology of laser cladding Ni60 powder[D](2019).

[5] Guo L L, Cui L, Xiao F et al. Influence of process parameters on surface properties and corrosion resistasnce of Inconel 625 coating prepared by laser cladding[J]. International Journal of Electrochemical Science, 18, 100213(2023).

[6] Han T F, Xiao M, Zhang Y et al. Laser cladding composite coatings by Ni-Cr-Ti-B4C with different process parameters[J]. Materials and Manufacturing Processes, 34, 898-906(2019).

[7] Li J H, Xue S L, Yao F P et al. Morphology control and process optimization for the laser cladding of Ni60 alloy onto H13 steel[J]. Lasers in Engineering, 52, 261-281(2022).

[8] Shayanfar P, Daneshmanesh H, Janghorban K. Parameters optimization for laser cladding of Inconel 625 on ASTM A592 steel[J]. Journal of Materials Research and Technology, 9, 8258-8265(2020).

[9] Zhou J B, Zhang J, Zhang L T et al. Effect of laser process parameters on crack rate and microstructure of Ni60/WC clad coating[J]. Heat Treatment of Metals, 46, 252-257(2021).

[10] Wu Z P. Study on crack and porosity control methods of laser cladding Ni60A alloy coating[D](2019).

[11] Li Q, Li T, Wu Z P et al. Study of crack mechanism in Ni-based alloy laser cladding coating[J]. Journal of Dalian University of Technology, 60, 159-164(2020).

[12] Sun Yu F, Fu H G, Ping X L et al. Effect of process parameters and niobium carbide addition on microstructure and wear resistance of laser cladding nickel-based alloy coatings[J]. Materials Science & Enginerring Technology, 51, 54-65(2020).

[13] Peng Y J, Zhang J L, Li Y H et al. Process optimization, microstructure and properties of laser-cladded Stellite6 coatings[J]. Applied Laser, 43, 11-19(2023).

[14] Wu S, Liu Z H, Huang X F et al. Process parameter optimization and EBSD analysis of Ni60A-25% WC laser cladding[J]. International Journal of Refractory Metals and Hard Materials, 101, 105675(2021).

[15] Huang H B, Sun W L. Influence of laser cladding process parameters on crack and thickness of Ni60[J]. Laser Technology, 45, 788-793(2021).

[16] Cao Q, Lian G F, Xiao S H et al. Optimization of process parameters of laser cladding Ni60A based on gray relational analysis[J]. Journal of Netshape Forming Engineering, 14, 173-181(2022).

[17] Liu Y, Xu T H, Li G H et al. A multi-objective optimization of laser cladding process of Ni-based coating on the preheated copper alloy[J]. Materials Today Communications, 35, 105614(2023).

[18] Li Q. Study on morphology and crack of laser cladding layer of Ni60A self-fluxing alloy[D](2019).

[19] Lin Y H, Yuan Y, Wang L et al. Effect of electric-magnetic compound field on the microstructure and crack in solidified Ni60 alloy[J]. Acta Metallurgica Sinica, 54, 1442-1450(2018).

[20] Xia Z H. Research on crack initiation and propagation in laser cladding technology[D](2022).

[21] Fang W. Thermal-stress study of in-situ fabrication process of novel Al2O3-Fe coating by laser cladding[D](2021).

[22] Ma M. Research on state identification of cladding layer in metal laser cladding process[D](2021).