[1] Zhang X H, Liu D X. Influence of surface coating on Ti811 alloy resistance to fretting fatigue at elevated temperature[J]. Rare Metals, 28, 266-271(2009). http://link.springer.com/article/10.1007/s12598-009-0053-z

[2] Bhaumik S K, Rangaraju R, Venkataswamy M A et al. Fatigue fracture of crankshaft of an aircraft engine[J]. Engineering Failure Analysis, 9, 255-263(2002). http://www.sciencedirect.com/science/article/pii/S135063070100022X

[3] Wang Y F, Xiao L J, Liu M X et al. Research progress of laser cladding amorphous coatings[J]. Laser & Optoelectronics Progress, 51, 070002(2014).

[4] Li J N, Gong S L, Shan F H et al. Analysis of microstructure performance of laser clad Ti3Al matrix composite coating on aviation titanium alloy[J]. Aeronautical Manufacturing Technology, 76-80, 84(2013).

[5] Zhu Z S[M]. Research and development of new-brand titanium alloys of high performance for aeronautical applications(2013).

[7] Li R F. Synthesis and characterization of Ni-based amorphous composite coating using diode laser processing[D]. Shanghai: Shanghai Jiao Tong University(2013).

[8] Zhao Y Q, Chen Y N, Zhang X M et al[M]. Phase transformation and heat treatment of Titanium alloys(2012).

[9] Sun F. Investigation of phase transformation kinetics and microstructure evolution in Ti60 alloy Xi'an:[D]. Northwestern Polytechnical University(2015).

[10] Chen H, Zhou H M, Zou Y. Synthesis of ultrafine crystal/nanocrystalline TiAl-based alloy by in situ sintering[J]. Rare Metal Materials and Engineering, 44, 2387-2390(2015). http://www.researchgate.net/publication/284780264_Synthesis_of_ultrafine_crystalnanocrystalline_TiAl-based_alloy_by_in_situ_sintering

[11] Yan Y J. Study of hydrogen embrittlement of precipitation strengthened austenitic stainless steel weldment[D]. Beijing: University of Science and Technology Beijing(2015).

[12] Zhou H P. Fabrication and properties of ultrafine-grained AZ31 magnesium alloys strengthened with Ti dispersions[D]. Harbin: Harbin Institute of Technology(2016).

[14] Gao X S, Huang Y H, Tian Z J et al. Erosive wear resistance behavior of laser cladding Al2O3+13%TiO2 coating prepared by plasma spraying on titanium alloy surface[J]. Chinese Journal of Lasers, 37, 858-862(2010).

[15] Guo C, Chen J M, Yao R G et al. Microstructure and tribological properties of Ti3Al intermetallic compound coating by laser cladding[J]. Tribology, 33, 14-21(2013).

[16] Ju Y, Guo S Y, Chen S Z et al. Tribological properties of Ni-clad nano-Al2O3 composite coatings by high-energy laser irradiation[J]. Tribology, 27, 50-53(2007).