[1] Zhou K, Han C J[M]. Metal powder-based additive manufacturing(2023).

[2] DebRoy T, Wei H L, Zuback J S et al. Additive manufacturing of metallic components: process, structure and properties[J]. Progress in Materials Science, 92, 112-224(2018).

[3] Han C J. Study on the porous metals and their composites fabricated by selective laser melting for bone implants[D](2018).

[4] Zheng Y F, Gu X N, Witte F. Biodegradable metals[J]. Materials Science and Engineering: Reports, 77, 1-34(2014).

[5] Zhao D L, Han C J, Peng B et al. Corrosion fatigue behavior and anti-fatigue mechanisms of an additively manufactured biodegradable zinc-magnesium gyroid scaffold[J]. Acta Biomaterialia, 153, 614-629(2022).

[6] Yin B Z, Qin Y, Wen P et al. Laser powder bed fusion for fabrication of metal orthopedic implants[J]. Chinese Journal of Lasers, 47, 1100001(2020).

[7] Zheng Y F, Xia D D, Chen Y N et al. Additively manufactured biodegrabable metal implants[J]. Acta Metallurgica Sinica, 57, 1499-1520(2021).

[8] Wen P, Jauer L, Voshage M et al. Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants[J]. Journal of Materials Processing Technology, 258, 128-137(2018).

[9] Chen Y Z, Wen P, Voshage M et al. Laser additive manufacturing of Zn metal parts for biodegradable implants: effect of gas flow on evaporation and formation quality[J]. Journal of Laser Applications, 31, 022304(2019).

[10] Yin J, Hao L, Yang L L et al. Investigation of interaction between vapor plume and spatter during selective laser melting additive manufacturing[J]. Chinese Journal of Lasers, 49, 1402202(2022).

[11] Montani M, Demir A G, Mostaed E et al. Processability of pure Zn and pure Fe by SLM for biodegradable metallic implant manufacturing[J]. Rapid Prototyping Journal, 23, 514-523(2017).

[12] Wen P, Voshage M, Jauer L et al. Laser additive manufacturing of Zn metal parts for biodegradable applications: processing, formation quality and mechanical properties[J]. Materials & Design, 155, 36-45(2018).

[13] Qin Y, Liu J G, Chen Y Z et al. Influence of laser energy input and shielding gas flow on evaporation fume during laser powder bed fusion of Zn metal[J]. Materials, 14, 2677(2021).

[14] Bouabbou A, Vaudreuil S. Understanding laser-metal interaction in selective laser melting additive manufacturing through numerical modelling and simulation: a review[J]. Virtual and Physical Prototyping, 17, 543-562(2022).

[15] Yao X J, Wang J W, Yang Y C et al. Review on defect formation mechanisms and control methods of metallic components during laser additive manufacturing[J]. Chinese Journal of Lasers, 49, 1402802(2022).

[16] Khairallah S A, Anderson A T, Rubenchik A et al. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones[J]. Acta Materialia, 108, 36-45(2016).

[17] Yan W T, Ge W J, Qian Y et al. Multi-physics modeling of single/multiple-track defect mechanisms in electron beam selective melting[J]. Acta Materialia, 134, 324-333(2017).

[18] Chen H, Wei Q S, Zhang Y J et al. Powder-spreading mechanisms in powder-bed-based additive manufacturing: experiments and computational modeling[J]. Acta Materialia, 179, 158-171(2019).

[19] Martin A A, Calta N P, Khairallah S A et al. Dynamics of pore formation during laser powder bed fusion additive manufacturing[J]. Nature Communications, 10, 1987(2019).

[20] Chen H, Sun Y J, Yuan W H et al. A review on discrete element method simulation in laser powder bed fusion additive manufacturing[J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 1, 100017(2022).

[21] Zhang K, Chen Y H, Marussi S et al. Pore evolution mechanisms during directed energy deposition additive manufacturing[J]. Nature Communications, 15, 1715(2024).

[22] He Q Y, Xia H X, Liu J H et al. Modeling and numerical studies of selective laser melting: multiphase flow, solidification and heat transfer[J]. Materials & Design, 196, 109115(2020).

[23] Yao L M, Huang S, Ramamurty U et al. On the formation of “Fish-scale” morphology with curved grain interfacial microstructures during selective laser melting of dissimilar alloys[J]. Acta Materialia, 220, 117331(2021).

[24] Wang L, Zhang Y M, Chia H Y et al. Mechanism of keyhole pore formation in metal additive manufacturing[J]. NPJ Computational Materials, 8, 22(2022).

[25] Khairallah S A, Martin A A, Lee J R I et al. Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing[J]. Science, 368, 660-665(2020).

[26] Liu B Q, Fang G, Lei L P et al. A new ray tracing heat source model for mesoscale CFD simulation of selective laser melting (SLM)[J]. Applied Mathematical Modelling, 79, 506-520(2020).

[27] Zhang H, Dai D H, Shi X Y et al. Thermal behavior of molten pool for laser directed energy deposition of 316L/Inconel 718 multi-materials[J]. Chinese Journal of Lasers, 49, 1402208(2022).

[28] Gu H, Wei C, Li L et al. Numerical and experimental study of molten pool behaviour and defect formation in multi-material and functionally graded materials laser powder bed fusion[J]. Advanced Powder Technology, 32, 4303-4321(2021).

[29] Gu H, Wei C, Li L et al. Multi-physics modelling of molten pool development and track formation in multi-track, multi-layer and multi-material selective laser melting[J]. International Journal of Heat and Mass Transfer, 151, 119458(2020).

[30] Cook P S, Murphy A B. Simulation of melt pool behaviour during additive manufacturing: underlying physics and progress[J]. Additive Manufacturing, 31, 100909(2020).

[31] Wu C C, Xie P, Zafar M Q et al. High-fidelity modeling of multilayer building process in electron beam powder bed fusion: build-quality prediction and formation-mechanism investigation[J]. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2, 100086(2023).

[32] Song J F, Fan Y M, Jiao Z X et al. Simulation of SLM formation of 316L stainless steel powder and reconstruction of single-layer multi-channel morphology[J]. Chinese Journal of Lasers, 50, 2402307(2023).

[33] Mills K C[M]. Recommended values of thermophysical properties for selected commercial alloys(2002).

[34] Dinsdale A T. SGTE data for pure elements[J]. Calphad, 15, 317-425(1991).

[35] Haynes W M[M]. CRC handbook of chemistry and physics(2014).

[36] Yang M L, Yang L, Peng S P et al. Laser additive manufacturing of zinc: formation quality, texture, and cell behavior[J]. Bio-Design and Manufacturing, 6, 103-120(2023).

[37] Lei C J, Ren S, Yin C H et al. Manipulating melt pool thermofluidic transport in directed energy deposition driven by a laser intensity spatial shaping strategy[J]. Virtual and Physical Prototyping, 19, e2308513(2024).

[38] Xiang Y, Zhang S Z, Wei Z Y et al. Forming and defect analysis for single track scanning in selective laser melting of Ti6Al4V[J]. Applied Physics A, 124, 685(2018).

[39] Mishra A K, Kumar A, Govind. Development and validation of a material evaporation assisted thermal model for time-efficient calculation of thermal and solidification parameters during laser powder bed fusion process for Ti6Al4V[J]. Additive Manufacturing, 66, 103453(2023).

[40] Wu Y H, Wu Q, Li M et al. Numerical investigation on effects of operating conditions and final dimension predictions in laser powder bed fusion of molybdenum[J]. Additive Manufacturing, 76, 103783(2023).