[1] CHEN Z W, LI Z Y, LI J J et al. 3D printing of ceramics: a review[J]. Journal of the European Ceramic Society, 661(2019).

[4] LAKHDAR Y, TUCK C, BINNER J et al. Additive manufacturing of advanced ceramic materials[J]. Progress in Materials Science, 100736(2021).

[5] MARCUS H L, BEAMAN J J, BARLOW J W et al. Solid freeform fabrication-powder processing[J]. American Ceramic Society Bulletin, 1030(1990).

[6] CHAUDHARY R P, PARAMESWARAN C, IDREES M et al. Additive manufacturing of polymer-derived ceramics: materials, technologies, properties and potential applications[J]. Progress in Materials Science, 100969(2022).

[7] GREIL P. Polymer derived engineering ceramics[J]. Advanced Engineering Materials, 339(2000).

[8] XIA A, YIN J, CHEN X et al. Polymer-derived Si-based ceramics: recent developments and perspectives[J]. Crystals, 824(2020).

[10] COLOMBO P, MERA G, RIEDEL R et al. Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics[J]. Journal of the American Ceramic Society, 1805(2010).

[11] FU S, ZHU M, ZHU Y. Organosilicon polymer-derived ceramics: an overview[J]. Journal of Advanced Ceramics, 457(2019).

[12] CAO J W, WANG P, LIU Z Y et al. Research progress on powder-based laser additive manufacturing technology of ceramics[J]. Journal of Inorganic Materials, 241(2022).

[14] ECKEL Z C, ZHOU C, MARTIN J H et al. 3D printing additive manufacturing of polymer-derived ceramics[J]. Science, 58(2016).

[16] YANG W, YANG D, MEI H et al. 3D printing of PDC- SiOC@SiC twins with high permittivity and electromagnetic interference shielding effectiveness[J]. Journal of the European Ceramic Society, 5437(2021).

[17] HUANG K, ELSAYED H, FRANCHIN G et al. 3D printing of polymer-derived SiOC with hierarchical and tunable porosity[J]. Additive Manufacturing, 101549(2020).

[18] XU X, LI P, GE C et al. 3D printing of complex-type SiOC ceramics derived from liquid photosensitive resin[J]. ChemistrySelect, 6862(2019).

[19] XIONG H, ZHAO L, CHEN H et al. 3D SiC containing uniformly dispersed, aligned SiC whiskers: printability, microstructure and mechanical properties[J]. Journal of Alloys and Compounds, 151824(2019).

[20] XIONG H, CHEN H, ZHAO L et al. SiC_w/SiC_preinforced 3D-SiC ceramics using direct ink writing of polycarbosilane-based solution: microstructure, composition and mechanical properties[J]. Journal of the European Ceramic Society, 2648(2019).

[21] GYAK K W, VISHWAKARMA N K, HWANG Y H et al. 3D-printed monolithic SiCN ceramic microreactors from a photocurable preceramic resin for the high temperature ammonia cracking process[J]. Reaction Chemistry & Engineering, 1393(2019).

[22] JANA P, SANTOLIQUIDO O, ORTONA A et al. Polymer- derived SiCN cellular structures from replica of 3D printed lattices[J]. Journal of the American Ceramic Society, 2732(2018).

[23] AZARNOUSH S, LAUBSCHER F, ZOLI L et al. Additive manufacturing of SiCN ceramic matrix for SiC fiber composites by flash pyrolysis of nanoscale polymer films[J]. Journal of the American Ceramic Society, 1855(2016).

[24] IVANOVA O, WILLIAMS C, CAMPBELL T. Additive manufacturing (AM) and nanotechnology: promises and challenges[J]. Rapid Prototyping Journal, 353(2013).

[25] YANG J, YU R, LI X et al. Silicon carbide whiskers reinforced SiOC ceramics through digital light processing 3D printing technology[J]. Ceramics International, 18314(2021).

[26] HE C, MA C, LI X et al. Polymer-derived SiOC ceramic lattice with thick struts prepared by digital light processing[J]. Additive Manufacturing, 101366(2020).

[27] WANG X, SCHMIDT F, HANAOR D et al. Additive manufacturing of ceramics from preceramic polymers: a versatile stereolithographic approach assisted by thiolene click chemistry[J]. Additive Manufacturing, 80(2019).

[28] MA C, HE C, WANG W et al. Metal-doped polymer-derived SiOC composites with inorganic metal salt as the metal source by digital light processing 3D printing[J]. Virtual and Physical Prototyping, 294(2020).

[29] HE C, LIU X, MA C et al. Digital light processing fabrication of mullite component derived from preceramic precursor using photosensitive hydroxysiloxane as the matrix and alumina nanoparticles as the filler[J]. Journal of the European Ceramic Society, 5570(2021).

[30] KULKARNI A, SORARU G D, PEARCE J M. Polymer-derived SiOC replica of material extrusion-based 3-D printed plastics[J]. Additive Manufacturing, 100988(2020).

[31] XIAO J, LIU D, CHENG H et al. Carbon nanotubes as light absorbers in digital light processing three-dimensional printing of SiCN ceramics from preceramic polysilazane[J]. Ceramics International, 19393(2020).

[32] WANG M, XIE C, HE R et al. Polymer-derived silicon nitride ceramics by digital light processing based additive manufacturing[J]. Journal of the American Ceramic Society, 5117(2019).

[34] PIERIN G, GROTTA C, COLOMBO P et al. Direct ink writing of micrometric SiOC ceramic structures using a preceramic polymer[J]. Journal of the European Ceramic Society, 1589(2016).

[35] SCHMIDT J, COLOMBO P. Digital light processing of ceramic components from polysiloxanes[J]. Journal of the European Ceramic Society, 57(2018).

[36] PELANCONI M, COLOMBO P, ORTONA A. Additive manufacturing of silicon carbide by selective laser sintering of PA12 powders and polymer infiltration and pyrolysis[J]. Journal of the European Ceramic Society, 5056(2021).

[37] ZOCCA A, COLOMBO P, GOMES C M et al. Additive manufacturing of ceramics: issues, potentialities, and opportunities[J]. Journal of the American Ceramic Society, 1983(2015).

[38] BRIGO L, SCHMIDT J E M, GANDIN A et al. 3D nanofabrication of SiOC ceramic structures[J]. Advanced Science, 1800937(2018).

[39] ZANCHETTA E, CATTALDO M, FRANCHIN G et al. Stereolithography of SiOC ceramic microcomponents[J]. Advanced Materials, 370(2016).

[40] SCHMIDT J, BRIGO L, GANDIN A et al. Multiscale ceramic components from preceramic polymers by hybridization of vat polymerization-based technologies[J]. Additive Manufacturing, 100913(2019).

[41] FU Y, XU G, CHEN Z et al. Multiple metals doped polymer- derived SiOC ceramics for 3D printing[J]. Ceramics International, 11030(2018).

[42] CHEN Z W, LI Z Y, LI J J et al. 3D printing of ceramics: a review[J]. Journal of the European Ceramic Society, 661(2019).

[43] RASAKI S A, XIONG D, XIONG S et al. Photopolymerization-based additive manufacturing of ceramics: a systematic review[J]. Journal of Advanced Ceramics, 442(2021).

[44] LI Z, CHEN Z, LIU J et al. Additive manufacturing of lightweight and high-strength polymer-derived SiOC ceramics[J]. Virtual and Physical Prototyping, 163(2020).

[45] FU Y, CHEN Z, XU G et al. Preparation and stereo lithography 3D printing of ultralight and ultrastrong ZrOC porous ceramics[J]. Journal of Alloys and Compounds, 867(2019).

[46] LIU J, XIONG S F, MEI H et al. 3D printing of complex-shaped polymer-derived ceramics with enhanced structural retention[J]. Materials and Manufacturing Processes, 1267(2022).

[47] XIONG S F, LIU J, CAO J W et al. 3D printing of crack-free dense polymer-derived ceramic monoliths and lattice skeletons with improved thickness and mechanical performance[J]. Additive Manufacturing, 102924(2022).

[48] TUMBLESTON J R, SHIRVANYANTS D, ERMOSHKIN N et al. Continuous liquid interface production of 3D objects[J]. Science, 1349(2015).

[49] DE BEER M P, VAN DER LAAN H L, COLE M A et al. Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning[J]. Science Advances, eaau8(2019).

[50] KRUNER B, ODENWALD C, TOLOSA A et al. Carbide-derived carbon beads with tunable nanopores from continuously produced polysilsesquioxanes for supercapacitor electrodes[J]. Sustainable Energy & Fuels, 1588(2017).

[51] JANUSZIEWICZ R, TUMBLESTON J R, QUINTANILLA A L et al. Layerless fabrication with continuous liquid interface production[J]. Proceedings of the National Academy of Sciences of the United States of America, 11703(2016).

[52] JOHNSON A R, CAUDILL C L, TUMBLESTON J R et al. Single- step fabrication of computationally designed microneedles by continuous liquid interface production[J]. PLOS ONE, e016(2016).

[53] MAHMOUDI M, WANG C, MORENO S et al. Three-dimensional printing of ceramics through "carving" a gel and "filling in" the precursor polymer[J]. ACS Applied Materials & Interfaces, 31984(2020).

[54] MINARY M, MAHMOUDI M. 3D printing polymer-derived ceramics using a thixotropic support bath[J]. American Ceramic Society Bulletin, 32(2021).

[56] VAEZI M, SEITZ H, YANG S. A review on 3D micro-additive manufacturing technologies[J]. International Journal of Advanced Manufacturing Technology, 1721(2013).

[57] KIM W S, HOUBERTZ R, LEE T H et al. Effect of photoinitiator on photopolymerization of inorganic-organic hybrid polymers (ORMOCER (R))[J]. Journal of Polymer Science, 1979(2004).

[58] KONSTANTINOU G, KAKKAVA E, HAGELUEKEN L et al. Additive micro-manufacturing of crack-free PDCs by two-photon polymerization of a single, low-shrinkage preceramic resin[J]. Additive Manufacturing, 101343(2020).

[59] LIU G, ZHAO Y, WU G et al. Origami and 4D printing of elastomer-derived ceramic structures[J]. Science Advances, eaat0(2018).

[60] GYAK K W, VISHWAKARMA N K, HWANG Y H et al. 3D-printed monolithic SiCN ceramic microreactors from a photocurable preceramic resin for the high temperature ammonia cracking process[J]. Reaction Chemistry & Engineering, 1393(2019).

[61] BRODNIK N R, SCHMIDT J, COLOMBO P et al. Analysis of multi-scale mechanical properties of ceramic trusses prepared from preceramic polymers (Revision prepared for additive manufacturing)[J]. Additive Manufacturing, 100957(2020).

[62] KEMP J W, HMEIDAT N S, COMPTON B G. Boron nitride- reinforced polysilazane-derived ceramic composites via direct-ink writing[J]. Journal of the American Ceramic Society, 4043(2020).

[63] ROMAN-MANSO B, MOYANO J J, PEREZ-COLL D et al. Polymer-derived ceramic/graphene oxide architected composite with high electrical conductivity and enhanced thermal resistance[J]. Journal of the European Ceramic Society, 2265(2018).

[64] FRIEDEL T, TRAVITZKY N, NIEBLING F et al. Fabrication of polymer derived ceramic parts by selective laser curing[J]. Journal of the European Ceramic Society, 193(2005).

[65] HUANG K, ELSAYED H, FRANCHIN G et al. 3D printing of polymer-derived SiOC with hierarchical and tunable porosity[J]. Additive Manufacturing, 101549(2020).

[66] ZOCCA A, GOMES C M, STAUDE A et al. SiOC ceramics with ordered porosity by 3D-printing of a preceramic polymer[J]. Journal of Materials Research, 2243(2013).

[67] FENG Y R, GUO X, HUANG K et al. Enhanced electromagnetic microwave absorption of SiOC ceramics targeting the integration of structure and function[J]. Journal of the European Ceramic Society, 6393(2021).

[68] NGO T D, KASHANI A, IMBALZANO G et al. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges[J]. Composites Part B-Engineering, 172(2018).

[69] SINGH S, RAMAKRISHNA S, SINGH R. Material issues in additive manufacturing: a review[J]. Journal of Manufacturing Processes, 185(2017).