1. Additive manufacturing technologies for ceramic production and applicable material forms^[1]

2. Additive manufacturing of polymer-derived ceramics^[14].

3. Schematic diagram (left) of DLP printing process of four different preceramic polymers, and optical microscopic images and photographs of the printed structures ^[28]

4. SEM images of SiC_w/SiC lattices under different printing height or using suspensions with different solid loading (left) and schematic illustration of the morphology of extruded filaments with different printing height (right)^[19]

5. SEM images of Kelvin cell structures pyrolyzed at 1000 ℃^[38]

6. Pictures and mechanical properties of 3D printing of bimetal-doped precursor^[41]

7. CAD models and optical images of the samples after printing and pyrolysis (left column), SEM images of the samples’ skeleton surface after pyrolysis (right two columns, (a-d))^[44]

8. (a-c) Optical images of the SiOC ceramic samples with different proportion of silicone oil additive, (d-f) closer looks of the corresponding samples in (a-c) ^[46], and (g) CAD models, green and pyrolyzed samples with the addition of phenolic resin additive ^[47]

9. Schematic of 3D printing of polymer-derived ceramics inside a support gel (a), illustration of the printing (b), printed samples (c-e), and pyrolyzed samples (f, g)^[53]

10. CAD design of the nozzle compared with the final pyrolysed part and SEM images^[58]

11. Origami and 4D printing of PDCs via DIW-morphing-heat treatment method^[59]