[2] [2] Kovacs G T A, Maluf N I, Petersen K E. Bulk micromachining of silicon［J］. Proceedings of the IEEE, 1998, 86(8): 1536-1551.

[3] [3] Dekker C. Solid-state nanopores［J］. Nature Nanotechnology, 2007, 2(4): 209-215.

[4] [4] Li J, Gershow M, Stein D, et al. DNA molecules and configurations in a solid-state nanopore microscope［J］. Nature Materials, 2003, 2(9): 611-615.

[5] [5] Yanagi I, Ishida T, Fujisaki K, et al. Fabrication of 3-nm-thick Si3N4 membranes for solid-state nanopores using the poly-Si sacrificial layer process［J］. Scientific Reports, 2015(5): 14656.

[6] [6] Jutzi F, Wicaksono D H B, Pandraud G, et al. Far-infrared sensor with LPCVD-deposited low-stress Si-rich nitride absorber membrane Part 1.Optical absorptivity［J］. Sensors & Actuators A:Physical, 2009, 152(2): 119-125.

[7] [7] Tellier C R. Anisotropic etching of silicon crystals in KOH solution［J］.Journal of Materials Science, 1998, 33(1): 117-131.

[10] [10] Biswas K, Kal S. Etch characteristics of KOH, TMAH and dual doped TMAH for bulk micromachining of silicon［J］. Microelectronics Journal, 2006, 37(6): 519-525.

[13] [13] Knizikevicius R, Kopustinskas V. Influence of temperature on the etching rate of SiO2 in CF4+O2 plasma［J］. Microelectronic Engineering, 2006, 83(2): 193-196.

[15] [15] Glembocki O J, Palik E D, De Guel G R. Hydration model for the molarity dependence of the etch rate of Si in aqueous alkali hydroxides［J］. Journal of the Electrochemical Society, 1991, 138(4): 1055-1063.

[16] [16] Shikida M, Sato K, Tokoro K, et al. Comparison of anisotropic etching properties between KOH and TMAH solutions［C］. Twelfth IEEE International Conference on Micro Electro Mechanical Systems.IEEE, 2002.

[17] [17] Shin Hyeon-Jin, Park In-Sung, Jang Yong-Ju, et al. Fabrication of free-standing nanoscale SiNx membranes with enhanced burst pressure via improved etching process［J］. Sensors & Actuators A:Physical, 2019(9): 297.