[1] Lee J D, Ra H Y, Hong K T et al. Analysis of deposition phenomena and residual stress in plasma spray coatings[J]. Surface and Coatings Technology, 56, 27-37(1992). http://www.sciencedirect.com/science/article/pii/025789729290192D

[2] Shi L K, Gao S Y, Xi M Z et al. Finite element simulation for laser direct depositing processes of metallic vertical thin wall parts II. the the simulation for thermal stress field during depositing processes[J]. Acta Metallurgica Sinica, 42, 454-458(2006).

[3] Kong F R, Kovacevic R. Modeling of heat transfer and fluid flow in the laser multilayered cladding process[J]. Metallurgical and Materials Transactions B, 41, 1310-1320(2010). http://link.springer.com/article/10.1007/s11663-010-9412-2

[4] Labudovic M, Hu D, Kovacevic R. A three dimensional model for direct laser metal powder deposition and rapid prototyping[J]. Journal of Materials Science, 38, 35-49(2003). http://www.emeraldinsight.com/servlet/linkout?suffix=b102&dbid=16&doi=10.1108%2F13552540910979785&key=10.1023%2FA%3A1021153513925

[5] Ghosh S, Choi J. Three-dimensional transient finite element analysis for residual stresses in the laser aided direct metal/material deposition process[J]. Journal of Laser Applications, 17, 144-158(2005). http://scitation.aip.org/content/lia/journal/jla/17/3/10.2351/1.1961688

[6] Gong C, Wang L F, Zhu G X et al. Influence of process parameters on the residual stress of cladding layers by laser additive manufacturing[J]. Laser Technology, 43, 263-268(2019).

[7] Wang L F, Sun Y X, Zhu G X et al. Optimization simulation of process parameters on the residual stress in 316L stainless steel by laser cladding[J]. Applied Laser, 39, 376-380(2019).

[8] Gu J Q, Luo F, Yao J H. Numerical simulation of residual stress during laser cladding[J]. Laser & Optoelectronics Progress, 47, 101401(2010).

[9] Hao N H, Lu W, Zuo T C. Thermal-mechanical coupling finite element analysis of stress field in laser cladding process[J]. China Surface Engineering, 17, 10-14(2004).

[10] Zhan H X, Wang Y, Han T et al. Residual stress analysis of the remelting zone on 42CrMo steel plate in single-pass laser wide-band treatment[J]. Chinese Journal of Lasers, 35, 625-630(2008).

[11] Hua L, Tian W, Liao W H et al. Study of thermal-mechanical coupling behavior in laser cladding[J]. Laser & Optoelectronics Progress, 51, 091401(2014).

[12] Du J X, Zhao C J, Bai Q F et al. Numerical simulation and experimental study on residual stress of coaxial powder feeding laser cladding[J]. Coal Mine Machinery, 41, 56-59(2020).

[13] Shi L K, Gao S Y, Xi M Z et al. Finite element simulation for laser direct depositing processes of metallic vertical thin wall parts Ⅲ. the analysis for distortion during depositing processes[J]. Acta Metallurgica Sinica, 42, 459-462(2006).

[14] Yao G F, Chen G N. Numerical simulation of transient thermal field and residual stress in laser melting process[J]. Applied Laser, 22, 241-243, 222(2002).

[15] Fang J X, Dong S Y, Xu B S et al. Study of stresses of laser metal deposition using FEM considering phase transformation effects[J]. Chinese Journal of Lasers, 42, 0503009(2015).

[16] Li H B, Guo M, Wang L et al. Preparation and wear resistance of H13/Ni/WC hybrid powder gradient cladding layer by laser cladding[J]. Laser & Optoelectronics Progress, 58, 031406(2021).

[17] Xu H Z, Ge H H, Wang J F et al. Effects of process parameters on Cr element distribution of laser cladded 316L alloy coatings[J]. Chinese Journal of Lasers, 47, 1202004(2020).

[18] Pang X T, Gong Q F, Wang Z J et al. Microstructure and mechanical behavior of 30CrMnSiA and 30CrMnSiNi2A high strength for laser cladding repair[J]. Chinese Journal of Lasers, 47, 1102002(2020).

[19] Greenwood J A. An interpolation formula for flash temperatures[J]. Wear, 150, 153-158(1991). http://www.sciencedirect.com/science/article/pii/004316489190312I

[20] Ashby M F, Easterling K E. A first report on diagrams for grain growth in welds[J]. Acta Metallurgica, 30, 1969-1978(1982). http://www.sciencedirect.com/science/article/pii/0001616082901006

[21] Picasso M, Marsden C F, Wagniere J D et al. A simple but realistic model for laser cladding[J]. Metallurgical and Materials Transactions B, 25, 281-291(1994). http://www.emeraldinsight.com/servlet/linkout?suffix=b8&dbid=16&doi=10.1108%2F13552540910979767&key=10.1007%2FBF02665211

[22] Dowden J, Davis M, Kapadia P. The flow of heat and the motion of the weld pool in penetration welding with a laser[J]. Journal of Applied Physics, 57, 4474-4479(1985). http://scitation.aip.org/content/aip/proceeding/aipcp/10.1063/1.334571

[23] Mazumder J, Steen W M. Heat transfer model for cw laser material processing[J]. Journal of Applied Physics, 51, 941-947(1980). http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5107498

[24] Yang X C, Li Y M, Huang W D et al. The calculation of temperature field in laser surface melting[J]. Materials Science and Engineering, 17, 3-5(1999).

[25] Liu Z X, Huang W D, Wan B T. Investigation of basic problems of the numerical model for powder-feed laser cladding[J]. Chinese Journal of Lasers, 30, 567-570(2003).

[26] Dang Y X, Qi W J, Lu L L. Research status and development trend of numerical simulation of laser cladding technology[J]. Hot Working Technology, 45, 23-27(2016).

[27] Liu Z X. Modeling and numerical simulation on laser remelting and cladding[D](2003).

[28] Zeng W H. Stress field analysis and numerical simulation of multi-channel laser cladding Ni based layer on stainless steel surface[D](2011).

[29] Wang Y L. Experiments and anakyses of 3540Fe/CeO2 coatings by ultrasonic vibration assisted laser cladding[J]. China Mechanical Engineering, 29, 2600-2605(2018).

[30] Cai C B. Study on residual stress of laser cladding remanufacturing coating[D](2017).