[1] Buchbinder D, Schleifenbaum H, Heidrich S et al. High power selective laser melting (HP SLM) of aluminum parts[J]. Physics Procedia, 12, 271-278(2011). http://www.sciencedirect.com/science/article/pii/S1875389211001143

[2] Atkins C, Brzozowski W, Dobson N et al. Lightweighting design optimisation for additively manufactured mirrors[J]. Proceedings of SPIE, 11116, 1111617(2019). http://www.researchgate.net/publication/335711179_Lightweighting_design_optimisation_for_additively_manufactured_mirrors

[3] Housholder R F. Molding process: US4247508[P](1981).

[4] Deckard C R. Method and apparatus for producing parts by selective sintering: US4863538[P](1989).

[5] Gu D D, Shen Y F. Research status and technical prospect of rapid manufacturing of metallic part by selective laser melting[J]. Aeronautical Manufacturing Technology, 55, 32-37(2012).

[6] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[7] Qiu J R, Wang H M. Special topic foreword of “laser additive manufacturing technology”[J]. Laser & Optoelectronics Progress, 55, 011400(2018).

[9] Wang H M. Materials’ fundamental issues of laser additive manufacturing for high-performance large metallic components[J]. Acta Aeronautica et Astronautica Sinica, 35, 2690-2698(2014).

[10] Zhang B, Fang Z G, Li X Y et al. Status and prospect of corrosion protection technology about aluminium alloy ship[J]. Materials China, 33, 414-417(2014).

[11] Huang Q S, Li L Q, Gao B B et al. Overview of development of metal parts additive manufacturing technology in foreign countries[J]. Defense Manufacturing Technology, 26-29(2012).

[12] Li Q, Wang F D, Wang G Q et al. Wire and arc additive manufacturing of lightweight metal components in aeronautics and astronautics[J]. Aeronautical Manufacturing Technology, 61, 74-82, 89(2018).

[13] Dong P, Li Z H, Yan Z Y et al. Research status of selective laser melting of aluminum alloys[J]. Applied Laser, 35, 607-611(2015).

[14] Cao J Z, Wang Z T. Application of aluminum alloy in aeronautics and aerospace vehicle(2)[J]. Light Alloy Fabrication Technology, 41, 1-12(2013).

[16] Wei J J, Mi G F, Xu L et al. Research progress on laser additive manufacturing of aluminum alloy and its composite[J]. Hot Working Technology, 48, 27-31(2019).

[17] Zhao G Y, Wang D D, Bai P K et al. Research progress of laser rapid prototyping technology for aluminum alloy[J]. Hot Working Technology, 39, 170-173, 177(2010).

[18] Li S, Li C G, Zhang Q S et al. Research status and prospect of additive manufacturing in laser by aluminum alloy[J]. Light Industry Machinery, 35, 98-101(2017).

[19] Gan W K, Peng J G, Li S H et al. Aluminum alloy selective laser melting precision forming technology and application in aviation field[J]. Aeronautical Manufacturing Technology, 62, 53-63(2019).

[20] Li C, He X. Design of lightweight large aperture mirrors and supporting structures[J]. Laser Technology, 39, 337-340(2015).

[21] Pham M S, Liu C, Todd I et al. Damage-tolerant architected materials inspired by crystal microstructure[J]. Nature, 565, 305-311(2019). http://www.ncbi.nlm.nih.gov/pubmed/30651615

[22] Olakanmi E O, Cochrane R F, Dalgarno K W et al. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties[J]. Progress in Materials Science, 74, 401-477(2015).

[23] Louvis E, Fox P, Sutcliffe C J et al. Selective laser melting of aluminium components[J]. Journal of Materials Processing Technology, 211, 275-284(2011). http://www.sciencedirect.com/science/article/pii/S0924013610003018

[24] Gu D D, Shen Y F. Research status and technical selective laser melting[J]. Acta Materialia, 115, 285-294(2016).

[25] Kempen K, Thijs L, Humbeeck J V et al. Mechanical properties of AlSi10Mg produced by selective laser melting[J]. Physics Procedia, 39, 439-446(2012). http://www.sciencedirect.com/science/article/pii/S1875389212025862

[26] Prashanth K G, Scudino S, Klauss H J et al. Microstructure and mechanical properties of Al-12Si produced by selective laser melting: effect of heat treatment[J]. Materials Science and Engineering A, 590, 153-160(2014). http://smartsearch.nstl.gov.cn/paper_detail.html?id=ce88d4045d3c2be8725c205807e04eed

[27] Mazzoli A. Selective laser sintering in biomedical engineering[J]. Medical & Biological Engineering & Computing, 51, 245-256(2013).

[28] Pu Y S, Wang B Q, Zhang L G et al. Metal 3D printing technology[J]. Surface Technology, 47, 78-84(2018).

[29] Gu D D, Meiners W, Wissenbach K et al. Laser additive manufacturing of metallic components: materials, processes and mechanisms[J]. International Materials Reviews, 57, 133-164(2012). http://www.tandfonline.com/doi/abs/10.1179/1743280411Y.0000000014?cookieSet=1

[30] Han Q Q, Mertens R, Sistiaga M M L et al. Laser powder bed fusion of Hastelloy X: effects of hot isostatic pressing and the hot cracking mechanism[J]. Materials Science and Engineering A, 732, 228-239(2018). http://www.sciencedirect.com/science/article/pii/S0921509318309249

[31] Kruth J P, Froyen L, van Vaerenbergh J et al. Selective laser melting of iron-based powder[J]. Journal of Materials Processing Technology, 149, 616-622(2004).

[32] Li H X, Gong S L, Sun F et al. Development and application of laser additive manufacturing for metal component[J]. Aeronautical Manufacturing Technology, 55, 26-31(2012).

[33] Griffith M L, Keicher D M, Atwood C L et al. Free form fabrication of metallic components using laser engineered net shaping (LENS TM)[C]. //7th Solid Freeform Fabrication (SFF) Symposium, August 12-14, 1996, University of Texas at Austin. Austin: [s.n.], 125-131(1996).

[34] Lin X, Huang W D. High performance metal additive manufacturing technology applied in aviation field[J]. Materials China, 34, 684-688, 658(2015).

[35] Yang Q, Lu Z L, Huang F X et al. Research on status and development trend of laser additive manufacturing[J]. Aeronautical Manufacturing Technology, 59, 26-31(2016).

[36] Liao W J, Hu J. Present status and industry prospect of additive manufacturing technology[J]. The Magazine on Equipment Machinery, 1-7(2015).

[37] Guo Z F, Zhang H. Research status quo and development trend of additive manufacturing technology[J]. Machine Tool & Hydraulics, 43, 148-151(2015).

[38] Zhang M, Xiang Q, Lü N C et al. Influence of tool size on the microstructure and mechanical properties of friction stir lap welded dissimilar aluminum-steel joint[J]. Journal of Mechanical Engineering, 56, 200-205(2020).

[39] Wang J G, Gao S Y, Chen X S et al. Mechanical properties of A356 aluminum alloy after laser surface remelting[J]. Chinese Journal of Lasers, 47, 0402002(2020).

[40] Polmear I J, Stjohn D, Nie J F et al. Light alloys: metallurgy of the light metals[M]. 5th ed(2017).

[41] Aboulkhair N T. Additive manufacture of an aluminium alloy: processing, microstructure, and mechanical properties[D], 16(2016).

[42] Wang Q G, Davidson C J. Solidification and precipitation behaviour of Al-Si-Mg casting alloys[J]. Journal of Materials Science, 36, 739-750(2001).

[43] Tisza M. Physical metallurgy for engineers[M](2001).

[44] Louvis E, Fox P, Sutcliffe C J et al. Selective laser melting of aluminium components[J]. Journal of Materials Processing Technology, 211, 275-284(2011). http://www.sciencedirect.com/science/article/pii/S0924013610003018

[45] Olakanmi E O, Cochrane R F, Dalgarno K W et al. Densification mechanism and microstructural evolution in selective laser sintering of Al-12Si powders[J]. Journal of Materials Processing Technology, 211, 113-121(2011). http://www.sciencedirect.com/science/article/pii/S0924013610002785

[46] Chou R, Milligan J, Paliwal M et al. Additive manufacturing of Al-12Si alloy via pulsed selective laser melting[J]. JOM, 67, 590-596(2015).

[47] Li X P, Wang X J, Saunders M et al. A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility[J]. Acta Materialia, 95, 74-82(2015).

[48] Siddique S, Imran M, Wycisk E et al. Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting[J]. Journal of Materials Processing Technology, 221, 205-213(2015).

[49] Prashanth K G, Scudino S, Eckert J et al. Tensile properties of Al-12Si fabricated via selective laser melting (SLM) at different temperatures[J]. Technologies, 4, 38(2016). http://www.researchgate.net/publication/311356158_Tensile_Properties_of_Al-12Si_Fabricated_via_Selective_Laser_Melting_SLM_at_Different_Temperatures/download

[50] Leary M, Mazur M, Elambasseril J et al. Selective laser melting (SLM) of AlSi12Mg lattice structures[J]. Materials & Design, 98, 344-357(2016). http://www.sciencedirect.com/science/article/pii/S0264127516302726

[51] Geng T Y. Microstructure and properties of Al-Si-Mg alloys formed by laser additive manufacturing[D], 10-11(2018).

[52] Kimura T, Nakamoto T, Mizuno M et al. Effect of silicon content on densification, mechanical and thermal properties of Al-xSi binary alloys fabricated using selective laser melting[J]. Materials Science and Engineering A, 682, 593-602(2017).

[53] Khosravani M R, Berto F, Ayatollahi M R et al. Fracture behavior of additively manufactured components: a review[J]. Theoretical and Applied Fracture Mechanics, 109, 102763(2020).

[54] Kempen K, Thijs L, Yasa E et al. Process optimization and microstructural analysis for selective laser melting of AlSi10Mg[J]. In Solid Freeform Fabrication Symposium, 22, 484-497(2011). http://www.researchgate.net/publication/262698754_Process_Optimization_and_Microstructural_Analysis_for_Selective_Laser_Melting_of_AlSi10Mg

[55] Wei K W, Wang Z M, Zeng X Y et al. Preliminary investigation on selective laser melting of Ti-5Al-2.5Sn α-Ti alloy: from single tracks to bulk 3D components[J]. Journal of Materials Processing Technology, 244, 73-85(2017).

[56] Tong X, Dai M J, Zhang Z H et al. Thermal fatigue resistance of H13 steel treated by selective laser surface melting and CrNi alloying[J]. Applied Surface Science, 271, 373-380(2013).

[57] Wang X, Liu D, Cheng X et al. Effect of heat treatment process on microstructures and mechanical properties of laser additive manufactured Al-Li alloys[J]. Chinese Journal of Lasers, 45, 0502004(2018).

[58] Tiryakioğlu M. The effect of solution treatment and artificial aging on the work hardening characteristics of a cast Al-7%Si-0.6%Mg alloy[J]. Materials Science and Engineering A, 427, 154-159(2006).

[59] Sun H J, Wei J, Zheng Z H et al. Effects of laser process parameters on residual stress of pure titanium samples prepared by laser melting deposition[J]. Chinese Journal of Lasers, 46, 0302014(2019).

[60] Wang W B, Ma R X, Jing Z C et al. Effect of solution-aging treatment on microstructure and properties of TC4 fabricated by laser three-dimensional printing[J]. Chinese Journal of Lasers, 46, 1002003(2019).

[61] Wang P, Gammer C, Brenne F et al. Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting[J]. Materials Science and Engineering A, 711, 562-570(2018).

[62] Parel T S, Wang S C, Starink M J et al. Hardening of an Al-Cu-Mg alloy containing types I and II S phase precipitates[J]. Materials & Design, 31, S2-S5(2010). http://www.sciencedirect.com/science/article/pii/S0261306910000117

[63] Aboulkhair N T, Maskery I, Tuck C et al. The microstructure and mechanical properties of selectively laser melted AlSi10Mg: the effect of a conventional T6-like heat treatment[J]. Materials Science and Engineering A, 667, 139-146(2016).

[64] Han Q Q, Jiao Y. Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting[J]. The International Journal of Advanced Manufacturing Technology, 102, 3315-3324(2019).

[65] Li W, Li S, Liu J et al. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism[J]. Materials Science and Engineering A, 663, 116-125(2016).

[66] Jiang C, Gao Y M. Efficient and stable machining of aerospace structural materials[J]. Tool Engineering, 46, 134-140(2012).

[67] Salem H, Salem H G, Attallah M M et al. Composite powder consolidation using selective laser melting: input energy/porosity morphology/balling effect relation[M]. //The Minerals, Metals & Materials Society TMS. TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings, 169-180(2017).

[68] Jin J B, Zhao Y, Zhao S Z et al. Effect of TiN content on microstructure and wear resistance of Ti-based composites produced by selective laser melting[J]. Chinese Journal of Lasers, 46, 1102013(2019).

[69] Zhang Y, Chan H F, Leong K W et al. Advanced materials and processing for drug delivery: the past and the future[J]. Advanced Drug Delivery Reviews, 65, 104-120(2013).

[70] Koli D K, Agnihotri G, Purohit R et al. Advanced aluminium matrix composites: the critical need of automotive and aerospace engineering fields[J]. Materials Today: Proceedings, 2, 3032-3041(2015).

[71] Torralba J M, Costa C E D, Velasco F et al. P/M aluminum matrix composites: an overview[J]. Journal of Materials Processing Technology, 133, 203-206(2003).

[72] Singh J, Chauhan A. Characterization of hybrid aluminum matrix composites for advanced applications: a review[J]. Journal of Materials Research and Technology, 5, 159-169(2016).

[73] Gao C, Wu W, Shi J et al. Simultaneous enhancement of strength, ductility, and hardness of TiN/AlSi10Mg nanocomposites via selective laser melting[J]. Additive Manufacturing, 34, 101378(2020).

[74] Astfalck L C, Kelly G K, Li X P et al. On the breakdown of SiC during the selective laser melting of aluminum matrix composites[J]. Advanced Engineering Materials, 19, 1600835(2017).

[75] Zhao X, Gu D D, Ma C L et al. Microstructure characteristics and its formation mechanism of selective laser melting SiC reinforced Al-based composites[J]. Vacuum, 160, 189-196(2019).

[76] Wang H, Gu D. Nanometric TiC reinforced AlSi10Mg nanocomposites: powder preparation by high-energy ball milling and consolidation by selective laser melting[J]. Journal of Composite Materials, 49, 1639-1651(2014).

[77] Gao C F, Xiao Z Y, Liu Z Q et al. Selective laser melting of nano-TiN modified AlSi10Mg composite powder with low laser reflectivity[J]. Materials Letters, 236, 362-365(2019).

[78] Liu X H, Zhao C C, Zhou X et al. CNT-reinforced AlSi10Mg composite by selective laser melting: microstructural and mechanical properties[J]. Materials Science and Technology, 35, 1038-1045(2019).

[79] Wu W J, Gao C F, Liu Z Q et al. Laser powder bed fusion of crack-free TiN/Al7075 composites with enhanced mechanical properties[J]. Materials Letters, 282, 128625(2021).

[80] Li X P, Ji G, Chen Z et al. Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility[J]. Acta Materialia, 129, 183-193(2017).

[81] Rambabu P, Eswara Prasad N, Kutumbarao V V et al. Aluminium alloys for aerospace applications[M]. //Aerospace Materials and Material Technologies, 29-52(2016).

[82] Zhuo L C, Wang Z Y, Zhang H J et al. Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy[J]. Materials Letters, 234, 196-200(2019).

[83] Casati R, Nasab M H, Coduri M et al. Effects of platform pre-heating and thermal-treatment strategies on properties of AlSi10Mg alloy processed by selective laser melting[J]. Metals, 8, 954(2018).

[84] Zhang H, Zhu H H, Qi T et al. Selective laser melting of high strength Al-Cu-Mg alloys: processing, microstructure and mechanical properties[J]. Materials Science and Engineering A, 656, 47-54(2016). http://smartsearch.nstl.gov.cn/paper_detail.html?id=b8d1259470b30cfa57dfcba6ff70dd2a

[85] Wang P, Gammer C, Brenne F et al. Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting[J]. Materials Science and Engineering A, 711, 562-570(2018).

[86] Aboulkhair N T, Maskery I, Tuck C et al. The microstructure and mechanical properties of selectively laser melted AlSi10Mg: the effect of a conventional T6-like heat treatment[J]. Materials Science and Engineering A, 667, 139-146(2016).

[87] Atkins C, Feldman C, Brooks D et al. Topological design of lightweight additively manufactured mirrors for space[J]. Proceedings of SPIE, 1070, 107060I(2018).

[88] Roulet M, Atkins C, Hugot E et al. 3D printing for astronomical mirrors[J]. Proceedings of SPIE, 10675, 1067504(2018).

[89] Eberle S, Reutlinger A, Curzadd B et al. Additive manufacturing of an AlSi40 mirror coated with electroless nickel for cryogenic space applications[J]. Proceedings of SPIE, 11180, 1118015(2019).

[90] An L M, Zhang S J, Zhou C L et al. Study on lightweight design for spatial mirror structure[J]. Manufacturing Automation, 41, 106-109(2019).

[91] Herzog H, Segal J, Smith J et al. Optical fabrication of lightweighted 3D printed mirrors[J]. Proceedings of SPIE, 9573, 957308(2015).

[92] Hilpert E, Hartung J, Risse S et al. Precision manufacturing of a lightweight mirror body made by selective laser melting[J]. Precision Engineering, 53, 310-317(2018).

[93] Tan S N, Ding Y L, Xu Y S et al. Development of additively manufacturing metal mirrors[J]. Chinese Optics, 13, 75-86(2020).

[94] Tan S N, Ding Y L, Xu Y S et al. Design and fabrication of additively manufactured aluminum mirrors[J]. Optical Engineering, 59, 013103(2020).

[96] Qu B. Optimal design and process reaserch of aluminium alloy bracket based on SLM fabricating[D], 17(2017).

[98] Wang T L, Zhang L, Jia X Z et al. Optimized design of integrated ultra-light main supporting structure for micro-nano remote-sensing camera[J]. Acta Optica Sinica, 39, 0728009(2019).

[99] Liu S T, Li Q H, Chen W J et al. Combination of topology optimization and additive manufacturing: an integration method of structural design and manufacturing[J]. Aeronautical Manufacturing Technology, 60, 26-31(2017).

[100] Lin T C, Cao C Z, Sokoluk M et al. Aluminum with dispersed nanoparticles by laser additive manufacturing[J]. Nature Communications, 10, 4124(2019).

[101] Tian X Y, Li D C, Lu B H et al. Status and prospect of 3D printing technology in space[J]. Manned Spaceflight, 22, 471-476(2016).