[1] Fan D. Study on the polishing mechanism of silicon carbide optical surface[J]. Laser & Optoelectronics Progress, 49, 022202(2012).

[2] Hu G X, Cai X, Rong Y H[M]. Fundamentals of materials science, 23-46(2010).

[3] Wang X, Zhang F. Experimental study of fabricating SiC mirror in full aperture with optimized fixed abrasive polishing pad[J]. Chinese Optics Letters, 12, s12203(2014). http://www.cqvip.com/QK/85954X/2014A01/662566177.html

[4] Deng H, Liu N, Endo K et al. Atomic-scale finishing of carbon face of single crystal SiC by combination of thermal oxidation pretreatment and slurry polishing[J]. Applied Surface Science, 434, 40-48(2018). http://www.sciencedirect.com/science/article/pii/S0169433217331094

[5] Deng H, Yamamura K. Atomic-scale flattening mechanism of 4H-SiC (0001) in plasma assisted polishing[J]. CIRP Annals, 62, 575-578(2013). http://www.sciencedirect.com/science/article/pii/S0007850613000292

[6] Zhang J F, Wang B, Dong S. A new development of ultra-smooth surface machining technology[J]. Optical Technique, 33, 150-154(2007).

[7] Zhang J F, Wang B, Dong S. Application of atmospheric pressure plasma polishing method in machining of silicon ultra-smooth surface[J]. Optics and Precision Engineering, 15, 1749-1755(2007).

[8] Zhao P J. Study of removal rate function of room temperature atmospheric plasma polishing[D]. Harbin: Harbin Institute of Technology, 9-12(2009).

[9] Shen X, Deng H, Zhang X et al. Preliminary study on atmospheric-pressure plasma-based chemical dry figuring and finishing of reaction-sintered silicon carbide[J]. Optical Engineering, 55, 105102(2016).

[10] Sun R, Yang X, Ohkubo Y et al. Optimization of gas composition used in plasma chemical vaporization machining for figuring of reaction-sintered silicon carbide with low surface roughness[J]. Scientific Reports, 8, 2376(2018).

[11] Su X. Design and study on the atmospheric pressure plasma jet torch[D]. Harbin: Harbin Institute of Technology, 12-18(2016).

[12] Shi B L. Study on key techniques in arc-enhanced plasma machining for silicon carbide mirrors[D]. Changsha: National University of Defense Technology, 125-131(2016).

[13] Wang X. Study on the fabrication of the high accuracy optical aspherical mirror with atmospheric pressure inductively coupled plasma chemical etching technology[J]. Chinese Journal of Lasers, 41, 0816001(2014).

[14] Xu X J, Zhu D C[M]. Gas discharge physics(1996).

[15] Choi J H, Lee T I, Han I et al. Investigation of the transition between glow and streamer discharges in atmospheric air[J]. Plasma Sources Science and Technology, 15, 416-420(2006). http://www.ingentaconnect.com/content/iop/psst/2006/00000015/00000003/art00017

[16] Ye H H. Numerical study of pulsed dielectric barrier discharge at atmospheric pressure in the needle-plane electrode configuration[D]. Dalian: Dalian University of Technology, 18-22(2014).

[17] Shao T, Yan P[M]. Atmospheric pressure gas discharge and plasma application, 359-367(2019).

[18] Yan Y. Chan-Park M B, Yue C. CF4 plasma treatment of poly(dimethylsiloxane): effect of fillers and its application to high-aspect-ratio UV embossing[J]. Langmuir, 21, 8905-8912(2005).

[19] Li Y R, Li X C, Jia P Y et al. Optical diagnosis on plasma parameters of a plasma plume generated by dielectric barrier discharge[J]. Acta Optica Sinica, 37, 0430002(2017).