[1] Nakamura S, Pearton S, Fasol G. The blue laser diode： The complete story[J]. Measurement Science and Technology, 12, 755-756(2001).

[2] Wu Y Z, Liu B, Li Z H et al. Homo-epitaxial growth of high crystal quality GaN thin films by plasma assisted–molecular beam epitaxy[J]. Journal of Crystal Growth, 506, 30-35(2019).

[3] Templier F. GaN‐based emissive microdisplays： A very promising technology for compact， ultra‐high brightness display systems[J]. Journal of the Society for Information Display, 24, 669-675(2016).

[4] Lu H, Guo W, Su C et al. Optimization on adhesive stamp Mass-transfer of micro-LEDs with support vector machine model[J]. IEEE Journal of the Electron Devices Society, 8, 554-558(2020).

[5] Huang Y, Tan G, Gou F et al. Prospects and challenges of mini‐LED and micro‐LED displays[J]. Journal of the Society for Information Display, 27, 387-401(2019).

[6] Zhang L, Ou F, Chong W C et al. Wafer‐scale monolithic hybrid integration of Si‐based IC and III–V epi‐layers—A mass manufacturable approach for active matrix micro‐LED micro‐displays[J]. Journal of the Society for Information Display, 26, 137-145(2018).

[7] Yeh H J J, Smith J S. Fluidic self-assembly for the integration of GaAs light-emitting diodes on Si substrates[J]. IEEE Photonics Technology Letters, 6, 706-708(1994).

[8] Wierer J J, Steigerwald D A, Krames M R et al. High-power AlGaInN flip-chip light-emitting diodes[J]. Applied Physics Letters, 78, 3379-3381(2001).

[9] Goßler C, Bierbrauer C, Moser R et al. GaN-based micro-LED arrays on flexible substrates for optical cochlear implants[J]. Journal of Physics D： Applied Physics, 47, 205401(2014).

[10] Soh M Y, Ng W X, Teo T H et al. Design and characterization of micro-LED matrix display with heterogeneous integration of GaN and BCD technologies[J]. IEEE Transactions on Electron Devices, 66, 4221-4227(2019).

[11] Peng D, Zhang K, Chao V S D et al. Full-color pixelated-addressable light emitting diode on transparent substrate （LEDoTS） micro-displays by CoB[J]. Journal of Display Technology, 12, 742-746(2016).

[12] Canavese G, Marasso S L, Quaglio M et al. Polymeric mask protection for alternative KOH silicon wet etching[J]. Journal of Micromechanics and Microengineering, 17, 1387-1393(2007).

[13] Wu X P, Ko W H. Compensating corner undercutting in anisotropic etching of （100） silicon[J]. Sensors and Actuators, 18, 207-215(1989).

[14] Wilke N, Mulcahy A, Ye S R et al. Process optimization and characterization of silicon microneedles fabricated by wet etch technology[J]. Microelectronics Journal, 36, 650-656(2005).

[15] Sanz-Velasco A, Amirfeiz P, Bengtsson S et al. Room temperature wafer bonding using oxygen plasma treatment in reactive ion etchers with and without inductively coupled plasma[J]. Journal of the Electrochemical Society, 150, G155-G162(2003).

[17] Kendall D L. On etching very narrow grooves in silicon[J]. Applied Physics Letters, 26, 195-198(1975).

[19] Van Veenendaal E, Sato K, Shikida M et al. Micromorphology of single crystalline silicon surfaces during anisotropic wet chemical etching in KOH and TMAH[J]. Sensors and Actuators A： Physical, 93, 219-231(2001).

[20] Miakonkikh A V, Averkin S N, Rudenko K V et al. Deep silicon plasma etching： Selection of processes for different applications[C], 11022, 503-508(2019).

[22] Glembocki O J, Palik E D, De Guel G R et al. Hydration model for the molarity dependence of the etch rate of Si in aqueous alkali hydroxides[J]. Journal of the Electrochemical Society, 138, 1055(1991).